Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> Maintenance > Tools

10K Volt Flat Blade Screw Driver, 911/912/914-6 (69-73)
Part Number: 999.191.002.01
Limited quantity.
$182.72
3M Electrical Tape
Part Number: 16578
General purpose vinyl insulating tape with excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. Can be used as a primary electrical insulation for all wire and cable splices rated up-to 600 volts. Measures 3/4in wide x 60ft long x .007in thick.
$4.50
9191 Camshaft Securing Tool, 911 (80-89)
Part Number: 000.721.202.00
9191 camshaft securing tool used to adjust valves or set cam timing. For 911 (1980-1989) models.
$88.75
Alternator Pulley Tool Kit
Part Number: SMC.400.024.1
This alternator pulley kit is used to test, remove and install overrunning alternator pulleys. This kit fits all models.
$298.50
Aluminum Racing Jack, Two Ton
Part Number: 1532
Dual pump pistons - five pumps to maximum height of 18 inches. Low profile. Aircraft-grade billet aluminum provides strength with maximum weight savings. Two-piece, 45" long handle snaps together for quick set up. Removable, rubber saddle pad protects vehicle and prevents slipping. Meets ANSI PALD, Part 10. 3-1/2" min height. 18" max height. 45" handle length.
$443.55
Autolampen Light Bulb Box, 356 Pre-A/356A
Part Number: AL01
Empty reserve light bulb box stamped “Autolampen”. The box is 115 mm width, 95 mm depth and 50 mm height. Limited quantities.
$59.74
Axle Strap Set
Part Number: SMC.000.172
Axle strap set.
$23.20
Ball Joint Removal Tool
Part Number: 000.721.280.20
This tool makes removal of ball joints easy. It fits starting in 1969.
$110.50
Baum Tools® Camshaft Alignment Tool Set (02-08)
Part Number: B9685KIT
Baum Tools® Camshaft Alignment Tool Set.
$327.78
Baum Tools® Camshaft Alignment Tool Set (97-01)
Part Number: B9612K
Baum Tools® Camshaft Alignment Tool Set.
$874.26
Baum Tools® Lug Bolt Hole Alignment Tool Set
Part Number: M0030A
For use on cars with 14 X 1.5 mm lug bolts. Includes 2 alignment tools. Use in place of lug bolts to hold wheel in position while installing the other lug bolts.
$44.12
Bilstein Front Shock Absorber Gland Nut Tool, Max. Drehmoment, 140 Nm, MS 08/6
Part Number: SMC.006.21
Bilstein front shock absorber gland nut tool, Max. Drehmoment, 140 Nm, MS 08/6. Installs and removes front shock absorber special retention nut.
$35.28
Brake Fluid Tester
Part Number: SMC.004.000
Test the water content of gylcol-based brake fluid with this pen sized tester.
$99.95
Camera Mount
Part Number: 883159
Camera mount for all Porsche models.
$125.95
Camshaft Holder Tool, 911 (65-81)
Part Number: T52.287.017
Camshaft holder tool for 911 (1965-1981) models.
$49.95
Carburetor Float Level Gauges, 911/914
Part Number: SMC.100.948.01
For all Weber carburetors.
$38.50
Center Cap Lock Set, (Ring Clip)
Part Number: 905952
No longer available
$39.95
CIS injection Mixture Adjusting Wrench
Part Number: 903072

Works up to mid 1980s and even some early 1990s depending on the model. It works on all 930 models.
$6.80
Clutch Alignment Tool, All 356's (50-65)
Part Number: CT 5302
Clutch alignment tool for all 356 models.
$7.43
Complete Engine Stand
Part Number: P201.313.215
Complete engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It includes the holding fixture(#P201), heavy duty stand(#P313) and flywheel lock(#P215).
$774.95
Compression Tester Kit
Part Number: 56.67
This compression tester kit measures cylinder compression to accurately diagnose any engine problems.
$44.60
Crankcase Vacuum Measurement Tool
Part Number: 10.0881.001
Measures crankcase vacuum to diagnose possible false air leaks (low vacuum) and possible air oil separator failure (high vacuum). Each tool is complete and ready to use for the models specified. Includes system overview and facts for diagnosing many different crankcase vacuum related issues. Also includes info for on-line technical support. For Porsche Boxster/Cayman 1997-2008 & 911 Carrera 1999-2008.
$450.00
Crowfoot Wrench, 46mm
Part Number: T52-287-446
Crowfoot wrench to install and remove cam nuts. 46mm.
$89.95
CV Joint Hex Socket, 12 Point
Part Number: SMC.067.096
Twelve point hex socket (8mm) for CV joints.
$14.00
CV Joint Hex Socket, 6 Point
Part Number: SMC.067.097
Six point hex socket (6mm) for CV joints.
$14.00
Dashboard Bezel Tool, All 356's (50-65)
Part Number: SMC.000.356.01
Dashboard bezel tool for all 356 (1950-1965) models.
Was: $14.11
Now: $9.97
On Sale
Dial Gauge Holder
Part Number: P240
Dial gauge holder to measure the end play of the crankshaft flywheel and pulley. This tool can also be used to measure clearances and run out. Fits Porsche and VW models with and air cooled engine.
$59.95
Dial Tire Air Gauge with Case
Part Number: SMC.000.948
Dial tire air gauge with case.
Was: $39.15
Now: $35.50
On Sale
Dial Tire Air Gauge with Chrome Case
Part Number: PNA.361.100.02
Currently out of stock
$32.74
Distributor Drive Puller Tool (50-76)
Part Number: 79150
Distributor drive puller tool fits from 1950-1976.
$79.50
Door Striker Hex Socket 1/2" Drive
Part Number: SMC.531.005.55
Door Striker Hex Socket 1/2" Drive. After years of not being removed or turned, it takes a specially tough socket to loosen door striker plates. Our 12-point, 8MM hex socket is the perfect tool.
$29.95
Double Open Ended Wrench, 10mm x 11mm
Part Number: 999.195.012.02
German made double open ended wrench, 10mm x 11mm.
$19.80
Double Open Ended Wrench, 12mm x 13mm
Part Number: 999.195.013.02
German made double open ended wrench, 12mm x 13mm.
$22.44
Double Open Ended Wrench, 14mm x 15mm
Part Number: 999.195.014.02
Double open ended wrench, 14mm x 15mm.
$16.83
Double Open Ended Wrench, 17mm x 19mm
Part Number: 999.195.015.02
German made double open ended wrench, 17mm x 19mm.
$22.52
Double Open Ended Wrench, 8mm x 9mm
Part Number: 999.195.011.02
German made double open ended wrench, 8mm x 9mm.
$14.93
Drive Belt Installation Kit
Part Number: SMC.559.311
This drive belt installation and removal tool kit works on self-tensioning, stretch type belts.
$199.50
Drive Belt Kit, Boxster/Cayman (99-08)
Part Number: ADK0029P
Drive belt kit for Boxster and Cayman (1999-2008) models.
$474.14
Engine Stand Flywheel Lock
Part Number: SMC.215
Needed to secure the crank shaft from rotating during R&R OF MOTOR. Used in conjunction with toll# P 201. Where flywheel lock bolts into a machined channel.
$44.95
Engine Stand Heavy Duty Clamp
Part Number: P 313
Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$225.00
Engine Stand Holding Fixture
Part Number: P 201
This exact reproduction engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It features a 360 degree swivel mounting collar for a floor stand (not included).
$312.41
Engine Stand w/ Clamp
Part Number: SMC.000.003
Grey engine stand with clamp. Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$396.95
Engine Stand, Yoke Portion, (97-08)
Part Number: P201.996
Engine stand (yoke portion) for Boxster/Cayman (1997-2008) and 997 (1999-2008) models.
$1,197.92
Extra Long Allen Socket, 8mm, 911/930 (74-89)
Part Number: P243
Solid one piece construction needed to reach bolts of heat exchangers/exhaust systems. The extra long length easily accesses these hard to reach exhaust system bolts. 3/8" drive. Fits 911 and 930 (1974-1989) models.
$44.95
Fan Pulley Wrench, 356A/356B (55-63)
Part Number: SMC.000.341
JORG generator and Fan Pulley Wrench, black. To properly adust or install the fan belt on the 356, it is essential to have the correct pulley wrench. For 356A, 356B.
$18.75
Fan Pulley Wrench, 911 (77-89)
Part Number: 999.571.047.02
JORG fan pulley wrench. It fits 1977-1989.
$44.50
On Sale
Fan Pulley Wrench, 911(65-74)/914-6 (70-72)
Part Number: P208
SIR TOOLS pulley Wrench needed for securing the generator from rotating during R&R of pulley or fan belt.
$44.95
Fan Pulley Wrench, 911(65-74)/914-6(70-72)
Part Number: 911.721.702.00
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt. It fits all 911 models with 2.0, 2.2 and 2.4 engines.
$35.06
Feeler Gauge (.004'')
Part Number: P213
Feeler gauge holder and one blade (.004") needed for correct adjustment of valve clearance. Come exclusively as shown here with its correct shape for the contour of your hand. Applicable for 356, 911, 912, 912-6 and 930 models.
$7.50
Flat Blade Screw Driver
Part Number: 999.191.002.02
High quality wooden handle screw driver. It measures 235mm by 26mm.
$56.74
Flat Blade Screw Driver (Pulley)
Part Number: 999.191.002.10
High quality wooden handle screw driver. It measures 265mm by 26mm.
$58.48
Flywheel Lock Tool (50-76)
Part Number: UN.120.1100
Flywheel lock tool fits from 1950 through 1976.
$22.50
Four Way Dashboard Tool
Part Number: SMC.935.701
Four way dashboard tool used to install and remove switch rings.
$49.16
Golde Sunroof Tool
Part Number: SMC.564.053.00
High quality reproduction sunroof tool made from 300 series stainless steel.
$46.75
Hazet 772/2 Wheel Wrench, 356 (50-63)
Part Number: 644.721.221.00
High quality, European made reproduction of hard to find Hazet 772/2 wheel wrench for 356 Pre-A (1950-1955), 356A (1955-1959) and 356B (1960-1963) models.
$164.52
Hazet Axle Boot Clamp Pliers
Part Number: -19356
Hazet nickle plated axle boot clamp pliers with lug holding device. 230mm length.
$129.63
Hazet Axle Boot Clamp Pliers
Part Number: 1847
Hazet axle boot clamp pliers for when a torque setting is required. This plier has a 3/8'' drive and an ergonomic 2-component handle and is 178mm in length.
$189.63
Hazet Ball Joint Puller
Part Number: 1779-1
Hazet universal ball joint puller for removing ball joint pivots. This puller has a wide clamping range, continuous height adjustment and tilting lower part. Measures 23mm at mouth opening and has a 65mm clamping range.
$128.00
Hazet Battery Brush
Part Number: 4650-4
Battery brush and pole for all years and models.
$28.38
Hazet Brake Caliper Cleaning Brush, Brass
Part Number: 3-1-4968
Hazet brake caliper cleaning brush with brass bristles for removing brake dust and dirt in aluminum brake calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$25.40
Hazet Brake Caliper Cleaning Brush, Steel
Part Number: 2-1-4968
Hazet brake caliper cleaning brush will steel bristles for removing brake dust and dirt in calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$16.70
Hazet Brake Caliper Piston Tool
Part Number: 4971-1
Hazet brake caliper piston tool for resetting of brake calipers without an integrated parking brake and no damage.
$267.00
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-15
Hazet breaker bar with two component handle. Polished chrome finish. Measures 396mm in length. 1/2'' drive.
$102.95
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-18
Hazet breaker bar with two component handle. Polished chrome finish. Measures 472mm in length. 1/2'' drive.
$113.25
Hazet Breaker Bar, 3/8" Drive
Part Number: 8814
Hazet breaker bar with two component handle. Polished chrome finish. Measures 250mm in length. 3/8'' drive.
$73.50
Hazet Diagonal Cutter, 145mm
Part Number: 1803M-11
Hazet lap joint, Swedish type diagonal cutters with 2 component plastic handle covers and sand-blasted and polished finished. 145mm length.
$39.50
Hazet Diagonal Cutter, 165mm
Part Number: 1803M-22
Hazet lap joint, Swedish type diagonal cutters with 2 component plastic handle covers and sand-blasted and polished finished. 165mm length.
$39.50
Hazet Door Panel Removal Pliers
Part Number: 799-4
Hazet door panel removal pliers for removing door panel clips, moulding clips and bumper cover impact strips. Measures 230mm.
$86.85
Hazet Door Panel Removal Tool
Part Number: 799-3
Hazet door panel removal tool for removing door panel clips. Measures 268mm in length and 28mm jaw opening.
$45.85
Hazet Fender Cover, 1000mm x 640mm
Part Number: 196-1
Hazet fender cover to protect your vehicle from scratches, dirt and oil during service and repairs. Uses six magnetic attachment and is suitable for most vehicles.
$89.60
Hazet Hose Clamp Pliers with Cable
Part Number: 798-16
To remove and install spring type hose clamps with parallel ends.
$263.60
Hazet Magnetic Parts Tray, 150mm
Part Number: 197-3
Hazet magnetic parts tray for storing small parts. Attach it magnetically to tool boxes or shop walls. 150mm diameter.
$16.00
Hazet Multi Purpose Drain Pan with Handles
Part Number: 197-1
Hazet multi purpose drain pan with handles, pouring spout and parts platform suitable for fluid changes and cleaning parts. Made of polyethylene. 6 liter capacity. 400 mm diameter. 100 mm height.
$21.05
Hazet Multi Purpose Drain Pan with Handles
Part Number: 197-2
Hazet multi purpose drain pan with handles, pouring spout and parts platform suitable for fluid changes and cleaning parts. Made of polyethylene. 16 liter capacity. 450 mm diameter. 180 mm height.
$65.63
HAZET Nozzle Adjusting Tool
Part Number: 4850-1
The telescopic handle can be used to demonstrate the jet of the nozzles to the window.
$19.70
Hazet Pneumatic Brake Bleeder Kit
Part Number: 1120934
This Hazet pneumatic brake bleeder kit sucks brake fluid to calipers and wheel cylinders and is designed to be used with compressed air. This kit contains (1) 750ml brake bleeder with hose and (2) 1L brake fluids refill bottles. This kit uses 180L/min air compression and 6-8 bar working pressure.
$165.00
Hazet Pneumatic Impact Wrench, 1/2" Drive
Part Number: 9012SPC
Hazet pneumatic impact wrench and 1/2" drive with ergonomically designed handle and casing for improved operation. New air motor development improves power and efficient air flow and improved pull up torque. 550 Nm recommended tightening torque. 750 Nm max tightening torque. 850 Nm max loosening torque. 7000 RPM. 6.3 bar operating pressure.
$265.00
Hazet Spark Plug Wrench, All 356's (50-65)
Part Number: HZ2505-2
Hazet spark plug wrench for 13/16" (20.8mm) spark plugs. Can be used with all 356 (1950-1965) models.
$75.10
Hazet Wrench Set
Part Number: SMC.004.002.01
Hazet Vanadium chrome wrench set. This new, German made, wrench set is perfect for your 356, 912 or 911 tool kit.
Set consists of: 17/19mm, 14/15mm, 12/13mm, 10/11mm and 8/9mm.
Was: $78.71
Now: $69.95
On Sale
Hockey Puck, 6 oz.
Part Number: 55.2620.100
Hockey puck measuring 3 inches in diameter. Weighs 6 ounces.
$2.70
Hub Cap Puller Screw Driver
Part Number: 644.721.311.00
High quality wooden handle screw driver. It measures 140mm by 23mm.
$35.93
Hubcap or Center Cap Remover Tool
Part Number: SMC.721.935.10
Now you can remove your Porsche hubcaps or center caps without damaging them.
$21.84
Hubcap Rivet Installation Tool
Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.
$26.41
IMS Bearing Installation Tool Set
Part Number: SMC.125.001
Tool set for IMS bearing update kits #SMC.002.005 (single row) and #SMC.097.099 (double row).
$400.00