Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 914/914-6 (70-76) > Tools, Books & Accessories > Tools

10K Volt Flat Blade Screw Driver, 911/912/914-6 (69-73)
Part Number: 999.191.002.01
Limited quantity
$155.54
10K Volt Screw Driver, Phillips, 911/912/914-6 (69-73)
Part Number: 900.137.001.04
10k volt Phillips screw driver for 911, 912 and 914-6 (1969-1973) models.
$155.54
3M Electrical Tape
Part Number: 16578
General purpose vinyl insulating tape with excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. Can be used as a primary electrical insulation for all wire and cable splices rated up-to 600 volts. Measures 3/4in wide x 60ft long x .007in thick.
$4.50
3M Strip Calk, Black, 1 Ft.
Part Number: 051135-08578
3M™ Strip-Calk is a soft butyl rubber caulking material that quickly and permanently fills all types of seams, joints and openings – long-lasting auto body maintenance and repair in much less time.
$22.00
Aluminum Racing Jack, Two Ton
Part Number: 1532
Dual pump pistons - five pumps to maximum height of 18 inches. Low profile. Aircraft-grade billet aluminum provides strength with maximum weight savings. Two-piece, 45" long handle snaps together for quick set up. Removable, rubber saddle pad protects vehicle and prevents slipping. Meets ANSI PALD, Part 10. 3-1/2" min height. 18" max height. 45" handle length.
$443.55
Baum Tools® Lug Bolt Hole Alignment Tool Set
Part Number: M0030A
For use on cars with 14 X 1.5 mm lug bolts. Includes 2 alignment tools. Use in place of lug bolts to hold wheel in position while installing the other lug bolts.
$44.12
Bilstein Front Shock Absorber Gland Nut Tool, Max. Drehmoment, 140 Nm, MS 08/6
Part Number: SMC.006.21
Bilstein front shock absorber gland nut tool, Max. Drehmoment, 140 Nm, MS 08/6. Installs and removes front shock absorber special retention nut.
$21.95
Bilstein Jack & Handle, 356/911/912 (56-71)
Part Number: 914.721.010.10
Original used Bilstein car jack with handle included. Individual jack appearance may vary slightly as jacks are in original condition. Every jack is the same style as the jack shown here.
$495.00
Bilstein Jack Handle (55-71)
Part Number: SMC.000.011
Are you missing your original Porsche Bilstein jack handle? It fits jacks for 356A, 356B, 356C, 911, and 912 models (1955-1971).
Was: $28.95
Now: $25.00
On Sale
Bilstien Jack Shaft Rubber Strap
Part Number: SMC.721.011.10
It's used on the early 914 jacks, as well as some 911, and 356. This rubber strap was never available without the jack. Concours guys were selling these for as much as $25 each before we started making them.
$8.97
On Sale
Complete Engine Stand
Part Number: P201.313.215
Complete engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It includes the holding fixture(#P201), heavy duty stand(#P313) and flywheel lock(#P215).
$774.95
Compression Tester Kit
Part Number: 56.67
This compression tester kit measures cylinder compression to accurately diagnose any engine problems.
$44.60
Crankcase Vacuum Measurement Tool
Part Number: 10.0881.001
Measures crankcase vacuum to diagnose possible false air leaks (low vacuum) and possible air oil separator failure (high vacuum). Each tool is complete and ready to use for the models specified. Includes system overview and facts for diagnosing many different crankcase vacuum related issues. Also includes info for on-line technical support. For Porsche Boxster/Cayman 1997-2008 & 911 Carrera 1999-2008.
$450.00
Crowfoot Wrench, 46mm
Part Number: T52-287-446
Crowfoot wrench to install and remove cam nuts. 46mm.
$89.95
CV Joint Hex Socket, 12 Point
Part Number: SMC.067.096
Twelve point hex socket (8mm) for CV joints.
$14.00
CV Joint Hex Socket, 6 Point
Part Number: SMC.067.097
Six point hex socket (6mm) for CV joints.
$14.00
Dial Gauge Holder
Part Number: P240
Dial gauge holder to measure the end play of the crankshaft flywheel and pulley. This tool can also be used to measure clearances and run out. Fits Porsche and VW models with and air cooled engine.
$59.95
Dial Tire Air Gauge with Case
Part Number: SMC.000.948
Dial tire air gauge with case.
Was: $39.15
Now: $35.50
On Sale
Dial Tire Air Gauge with Chrome Case
Part Number: PNA.361.100.02
Currently out of stock
$32.74
Distributor Drive Puller Tool (50-76)
Part Number: 79150
Distributor drive puller tool fits from 1950-1976.
$79.50
Double Open Ended Wrench, 10mm x 11mm
Part Number: 999.195.012.02
German made double open ended wrench, 10mm x 11mm.
$19.80
Double Open Ended Wrench, 12mm x 13mm
Part Number: 999.195.013.02
German made double open ended wrench, 12mm x 13mm.
$22.44
Double Open Ended Wrench, 14mm x 15mm
Part Number: 999.195.014.02
Double open ended wrench, 14mm x 15mm.
$16.83
Double Open Ended Wrench, 17mm x 19mm
Part Number: 999.195.015.02
German made double open ended wrench, 17mm x 19mm.
$22.52
Double Open Ended Wrench, 8mm x 9mm
Part Number: 999.195.011.02
German made double open ended wrench, 8mm x 9mm.
$14.93
Engine Stand Flywheel Lock
Part Number: SMC.215
Needed to secure the crank shaft from rotating during R&R OF MOTOR. Used in conjunction with toll# P 201. Where flywheel lock bolts into a machined channel.
$44.95
Engine Stand Heavy Duty Clamp
Part Number: P 313
Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$225.00
Engine Stand Holding Fixture
Part Number: P 201
This exact reproduction engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It features a 360 degree swivel mounting collar for a floor stand (not included).
$312.41
Engine Stand w/ Clamp
Part Number: SMC.000.003
Grey engine stand with clamp. Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$396.95
Factory Jack
Part Number: 911.721.011.04
Replace that stolen, worn or rusty jack with this genuine jack. It's easy to operate and easily fits into jack outlets in car to prevent damaging the car.
$172.35
Factory Jack Felt Strip
Part Number: 911.556.208.02
Factory jack felt strip.
$1.15
Fan Pulley Wrench, 911(65-74)/914-6 (70-72)
Part Number: P208
SIR TOOLS pulley Wrench needed for securing the generator from rotating during R&R of pulley or fan belt.
$44.95
Fan Pulley Wrench, 911(65-74)/914-6(70-72)
Part Number: 911.721.702.00
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt. It fits all 911 models with 2.0, 2.2 and 2.4 engines.
$35.06
Feeler Gauge (.004'')
Part Number: P213
Feeler gauge holder and one blade (.004") needed for correct adjustment of valve clearance. Come exclusively as shown here with its correct shape for the contour of your hand. Applicable for 356, 911, 912, 912-6 and 930 models.
$7.50
Flywheel Lock Tool (50-76)
Part Number: UN.120.1100
Flywheel lock tool fits from 1950 through 1976.
$22.50
Four Way Dashboard Tool
Part Number: SMC.935.701
Four way dashboard tool used to install and remove switch rings.
$49.16
Golde Sunroof Tool
Part Number: SMC.564.053.00
High quality reproduction sunroof tool made from 300 series stainless steel.
$46.75
Hazet Battery Brush
Part Number: 4650-4
Battery brush and pole for all years and models.
$28.38
Hazet Brake Caliper Cleaning Brush, Brass
Part Number: 3-1-4968
Hazet brake caliper cleaning brush with brass bristles for removing brake dust and dirt in aluminum brake calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$25.40
Hazet Brake Caliper Cleaning Brush, Steel
Part Number: 2-1-4968
Hazet brake caliper cleaning brush will steel bristles for removing brake dust and dirt in calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$16.70
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-15
Hazet breaker bar with two component handle. Polished chrome finish. Measures 396mm in length. 1/2'' drive.
$102.95
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-18
Hazet breaker bar with two component handle. Polished chrome finish. Measures 472mm in length. 1/2'' drive.
$113.25
Hazet Breaker Bar, 3/8" Drive
Part Number: 8814
Hazet breaker bar with two component handle. Polished chrome finish. Measures 250mm in length. 3/8'' drive.
$73.50
Hazet Hose Clamp Pliers with Cable
Part Number: 798-16
To remove and install spring type hose clamps with parallel ends.
$263.60
HAZET Nozzle Adjusting Tool
Part Number: 4850-1
The telescopic handle can be used to demonstrate the jet of the nozzles to the window.
$19.70
Hazet Wrench Set
Part Number: SMC.004.002.01
Hazet Vanadium chrome wrench set. This new, German made, wrench set is perfect for your 356, 912 or 911 tool kit.
Set consists of: 17/19mm, 14/15mm, 12/13mm, 10/11mm and 8/9mm.
Was: $78.71
Now: $69.95
On Sale
Hockey Puck, 6 oz.
Part Number: 55.2620.100
Hockey puck measuring 3 inches in diameter. Weighs 6 ounces.
$2.70
Hubcap Rivet Installation Tool
Part Number: SMC.68.120
Now you can install your new hubcap clips correctly with this new tool. Simply clamp the mandrel into a standard bench vice, and peen rivets with a hammer and punch.
$26.41
Jack Hold Down Strap Replacement, 911/914/930/912E (74-89)
Part Number: 914.722.021.10
This is the rubber strap that holds the jack in place in the trunk. It's a great detail for Concours shows. It fits 911(1974-1989), 914(1970-1976), 912E(1976), 930 (1976-1989) models. Metal clips are not included. Two needed.
$12.51
Jack Hold Down Strap, 911/914/930/912E (74-89)
Part Number: 911.722.021.01
Jack bracket for 911(1974-1989), 914(1970-1976), 912E(1976), 930 (1976-1989) models.
$50.94
Jack Pad, 356/912/911/914/930
Part Number: SMC.559.149.20
Jack pad for all 356's (1950-1965), 911 (1965-1989), 912 (1965-1969), 914-4 (1970-1976), 914-6 (1970-1972) and 930 (1976-1989). Designed for use with hydraulic floor jack and it is inserted into the jack receiver.
$22.41
Jack Strap Set, 914 (70-76)
Part Number: 914.722.021.SET
Set of two jack straps with stainless steel hardware for 914 (1970-1976) models.
$36.00
Klein Spark Plug Wrench, 911/914-6 (66-73)
Part Number: SMC.012.203.ACurrently unavailable
$76.41
Lug Nut Soft Socket (19mm)
Part Number: SMC.410.001
No longer available
$29.95
Lug Nut Tie Down Set
Part Number: 911822
When trailering your car use them in place of lug nuts. Made of superior strength steel and torqued to the same specifications as the standard lug nuts, 90 Ft Lbs. Works on all 5 stud pattern wheels.
$149.50
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.000.953
Reproduction 356A, 356B, 356C Messko leather pouch.
$19.94
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.200.005
Reproduction Messko leather pouch.
$41.64
Messko Tire Air Gauge, Dual Dial
Part Number: SMC.600.002
CURRENTLY UNAVAILABLE

$129.50
Messko Tire Air Gauge, Single Dial
Part Number: SMC.600.004 SM
No longer available
$129.50
Motometer Tire Air Gauge
Part Number: 624.003.2002
Motometer tire pressure gauge with 45mm face. 8-64 Psi, 0.5-4.5 bar.
$26.75
Motometer Tire Air Gauge
Part Number: 624.003.1025
Currently unavailable
$46.50
Motometer Tire Air Gauge
Part Number: 911.722.201.02
MOTOMETER tire air gauge for early Porsche models. This is a great addition to your factory tool kit.
$65.12
Nussbaum Jumbo 7000 Double Scissor Lift
Part Number: JUMBO 7000
Double scissor lift with lifting capacity of 7,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$8,485.00
Nussbaum Jumbo 9000 Double Scissor Lift
Part Number: JUMBO 9000
Double scissor lift with lifting capacity of 9,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$10,875.00
Nussbaum SPL10000 Two Post Lift
Part Number: SPL10000M
ALI certified hydraulic asymmetric two post lift with a lifting capacity of 10,000 pounds. 3.5 hp integrated power unit and covered hard-chromed cylinders. 124" bay setting. Fast lifting and lowering times. Variable lowering speed with manual control lever. Mechanical security locks. Self-purging cylinders for powerful lifting and lowering. Protective coverings for column cylinders. Designed for short and long wheelbase vehicles.
$4,295.00
Oil Filter Wrench
Part Number: 000.721.920.40
Oil filter wrench. 3/8'' drive.
$38.50
Oil Line Wrench Set
Part Number: P242
Make your oil line installation and repairs easy with this four pack set. For use on 911, 930, 914/6, 944, 968 and 911 Turbo models. Set includes 27, 30, 32 and 36mm sizes.
$89.00
Oil Seal Arbor, Flywheel Side
Part Number: P215
Oil seal arbor to install the oil seal on the flywheel side of the crankshaft for 911 models (1965-1977).
$154.95
Piston Wrist Pin And Circlip Installation Tool
Part Number: 10.0678.106
Piston wrist pin and circlip installation tool. Includes storage case & instruction book.
$1,669.23
Red Handled Screw Driver Set
Part Number: SMC.012.025
This European made, red handled screwdriver set includes one #2 Phillips head and one #4 flat head screwdriver. Often missing from tool kits, these screw drivers make a great replacement for the impossible to find originals.
$67.15
On Sale
Screw Driver Set, 911/914-6/930
Part Number: 911.721.107.02
$48.31
Spark Plug Gauge, Bosch
Part Number: NLA.721.681.00
Bosch spark plug gauge.
$21.00
Stud Remover Set - 4 Piece, Metric
Part Number: 6987
Designed and tested to reach studs in difficult work areas. 3/8" drive for 6 mm and 8 mm stud sizes, and 1/2" drive for 10 mm and 12 mm stud sizes. Housed in a blow-molded storage case.
$75.95
Tie Rod End Puller Tool
Part Number: 910673
Designed for Porsche tie rods; our thin wrench gets in where others cannot. Use the 46mm spanner for removing and installing tie rods. It does not work for 911 Turbo.
$79.00
Tire Air Compressor
Part Number: SS-PDQ/06
Don't remove your tire or wait for a tow truck again! Fix your flat in 15 minutes or less and improve your fuel economy!
$29.99
Tire Pressure Gauge
Part Number: 911.722.202.00
A tire pressure gauge is an essential piece of kit for every classic Porsche. In the 1960s and 70s, the tire pressure gauge was included in the tool bag of every new vehicle, and it is now available to buy again.
$60.45
Tool Kit Bag, 911/912/914-6 (69-73)
Part Number: SMC.721.010.04
Excellent reproduction tool kit bag for 911(1969-1973, 912(1969) and 914-6(1970-1972) models.
$85.50
Tool Kit, 911/912/914-6 (69-73)
Part Number: 901.721.001.20
Reproduction 911 (1969-1973), 912 (1969) or 914/6 (1970-1972) toolkit that very closely resembles the original tool kit at a fraction of the cost. The kit includes two red finished plastic screwdrivers, pliers, wrenches, lug wrench, spark plug wrench, fan belt, fuse pack, fan pulley wrench and correct black bag.
$595.65
Tool Kit, Updated Version, 911/912/914-6
Part Number: 911.721.002.00
Replacement complete tool kit. This kit is the genuine updated version of the original tool kit.
$386.90
Used Bilstein Double Hump Jack, 914 (70-71)
Part Number: 914.721.011.10
Used Bilstein double hump jack for 914 (1970-1971) models.
$145.00
Used Green Dot Jack, 914 (72-74)
Part Number: USED.914.01
Used green dot jack for 914 (1972-1974) models.
$83.33
Used Green Dot Jack, 914 (75-76)
Part Number: USED.914.02
Used green dot jack for 914 (1975-1976) models.
$83.33
Valve Adjustment Tool (50-94)
Part Number: UN.120.8895
This tool is used on valve adjustment screw. Fits from 1950 through 1994.
$65.78
Wheel Lug Wrench, 19mm
Part Number: 999.571.045.02
Wheel Lug Wrench, 19mm.
$39.40