Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 914/914-6 (70-76) > Engine & Fuel Systems > 914 Engine Block

A/C Compressor V Belt, 912E/914 (70-76)
Part Number: 039.131.615
A/C compressor v belt for 912E and 914-4 models (10 x 740mm).
$7.70
Accelerator Cable Support, 914-6 (70-72)
Part Number: 914.423.285.01
Accelerator cable support for 914-6 models (1970-1972).
$18.25
Accelerator Cable, 914
Part Number: 914.423.067.02
Accelerator cable for 914-4 models.
$37.03
Accelerator Cable, 914-6 (70-72)
Part Number: 914.423.066.02
Accelerator cable for 914-6 models (1970-1972).
$106.41
Air Cleaner Gasket, 911/912/914 (65-76)
Part Number: 901.108.215.02
Rubber air cleaner gasket for 911 (1965-1973), 912 (1965-1969), and 914 (1970-1976) models. This part supersedes 901.108.215.00.
$9.97
Alternator Cooling Elbow, 914 (70-76)
Part Number: 021.903.655.D
No longer available
$27.58
Alternator Harness Grommet, 911/912/914 (65-76)
Part Number: 999.702.007.50
Alternator headrest grommet for 911 (1965-1973), 912 (1965-1969) and 914 (1970-1976) models.
$8.03
Alternator Harness Grommet, 914 (70-76)
Part Number: SMC.914.765.36
Alternator harness for wiring harness behind the alternator for 914 (1970-1976) models.
$7.80
Alternator V Belt, 912E/914 (70-76)
Part Number: 068.903.137.D
Alternator V belt for 914-4 and 912E (1970-1976) models. Measures 10mm x 965mm.
$14.12
Alternator, 914 (70-76)
Part Number: 911.603.118.00
770 W alternator for 914 (1970-1976) models.
$854.00
Alternator, Remanufactured, 914 (70-76)
Part Number: AL75X
Remanufactured alternator for 914 (1970-1976) models.
$108.75
Alternator, Remanufactured, 914 (70-76)
Part Number: BOA110
Remanufactured alternator for 914 (1970-1976) models.
$108.75
Alternator, Remanufactured, 914 (70-76)
Part Number: 022.903.023.AX
12V, 50 amp remanufactured alternator for 914 (1970-1976) models.
$255.00
Bracket, 911/912E/930/914 (65-89)
Part Number: 999.511.076.02
Bracket for 911, 912E, 930 and 914 (1965-1989) models.
$6.49
Cam Follower, 914/912E
Cam follower for 914-4 and 912E models.
$11.25
Camshaft Bearing Set, Standard, 914 (70-76)
Part Number: 021.198.541T
Standard sized, Silverline camshaft bearing set for 914 models (1970-1976) and Type 4 engines.
$13.85
Camshaft Bearing Set, Standard, 914 (70-76)
Part Number: 021.198.541BR
Standard sized, Mahle camshaft bearing set for 914 models (1970-1976) and Type 4 engines.
$28.80
Camshaft Bearing Set, Standard, 914/912E
Standard sized camshaft bearing set for 914-4 and 912E models.
$19.75
Camshaft Bearing Set,.25mm/.010, 914 (70-76)
Part Number: 021 105 70
Standard sized, Mahle camshaft bearing set for 914 models (1970-1976) and Type 4 engines.
$19.95
Camshaft Housing Barrel Nut (65-94)
Part Number: 901.111.271.00
Camshaft housing barrel nut for 911, 930, 911 Turbo, C2 and C4 models (1965-1994).
$1.28
Camshaft Plug, 914/912E (70-76)
Part Number: 041.101.157
Camshaft plug for 914-4 (1970-1976) and 912E (1976) models.
$4.56
Camshaft, 914/912E
Part Number: 021.109.021.M
Engine camshaft for 914-4 and 912E (1970-1976) models.
$387.25
Carburetor Hose Cap, 356/911/912/914 (50-76)
Part Number: 901.108.219.00
Carburetor hose cap for all 356 (1950-1965), 911/912 (1965-1969) and 914 (1970-1976) models.
$13.26
Chain Sprocket Support Upgrade, Left (79-92)
Part Number: 930.105.509.00
We recommend use of these stronger brushed supports which were introduced in 1980 and do not require the spacer bushings.
$365.41
Chain Sprocket Support Upgrade, Right (70-72,79-92)
Part Number: 930.105.510.00
We recommend use of these stronger brushed supports which were introduced in 1980 and do not require the spacer bushings.
$291.50
Chain Tensioner Rebuild Kit, 911/930/914 (65-83)
Part Number: 911.105.901.01
Repair kit for "049" & "053" tensioners. Fits 911, 930 and 914 (1965-1983) models. One needed per tensioner.
$41.76
Claw Pole Rotor Repair Kit, 914 (70-76)
Part Number: 021.903.220
Claw pole rotor repair kit for 914 (1970-1976) models.
$6.63
Complete Engine Gasket Set, 911/914 (2.0L)
Part Number: 901.100.902.01
Engine gasket set for 911 (1965-1969) and 914-6 (1970-1972) models.
$374.41
Complete Rod Bearing Set, 911/914 (65-72)
Part Number: 901.103.141.50
Complete rod bearing set for 911 (1965-1973) and 914 (1970-1972) models with 2.0 engines. One set needed per car. Measures .25mm.
$270.00
Connecting Rod Nut, 914/912E
Part Number: 056.105.427
Connecting rod nut for 914-4 and 912E models.
$3.95
Connecting Rod, 5.158", "H" Beam, 914 (70-76)
Part Number: 004 5158H
5.158" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This item fits a 2.0 journal and 24mm wrist pin.
$295.40
Connecting Rod, 5.158", "H" Beam, 914 (70-76)
Part Number: 004 5158H-ARP
5.158" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This item fits a 2.0 journal and 24mm wrist pin and ARP bolts.
$350.80
Connecting Rod, 5.325'', ''H'' Beam, 914 (70-76)
Part Number: 004 5325H-ARP
5.325" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin with ARP bolts.
$350.80
Connecting Rod, 5.325'', "H" Beam, 914 (70-76)
Part Number: 004 5325H
5.325" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin.
$295.40
Connecting Rod, 5.500'', ''H'' Beam, 914 (70-76)
Part Number: 004 5500H-ARP
5.500" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin with ARP bolts.
$350.80
Connecting Rod, 5.500'', "H" Beam, 914 (70-76)
Part Number: 004 5500H
5.500" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin.
$295.40
Connecting Rod, 5.700'', ''H'' Beam, 914 (70-76)
Part Number: 004 5700H-ARP
5.700" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin with ARP bolts
$350.80
Connecting Rod, 5.700'', "H
Part Number: 004 5700H
5.700" Chromoly "H" beam connecting rod for 914 (1970-1976) models or Type 4 engines. This items fits a 2.0 journal and 22mm wrist pin.
$295.40
Connecting Rod, 914, 1.8 (70-76)
Part Number: 022.105.401.041
Connecting rod for 914 (1970-1976) models with a 1.8V/1.8 engine. Four required.
$198.00
Copper Washer, 911/914/930 (65-91)
Part Number: 900.123.005.00
Copper Washer for 911 (1965-1988), 911 Carrera (1989), 911 Speedster (1989), 911 Turbo (1989, 1991), 914 2.0L H6 (1972), 914-6 (1970-1971) and 930 (1978-1979) models. Measures 12mm x 16mm x 1.5mm.
$0.07
Crank to Flywheel O-Ring, 914/912E
Part Number: 021.105.279
O-ring for crank to flywheel on 914-4 and 912E models.
$1.50
Crankshaft Bearing Shell I, 911/912/914 (65-76)
Part Number: 901.101.131.00
Crankshaft bearing shell I for 911 (1965-1977), 912 (1965-1969) and 914 (1970-1976) models. Two required.
$59.74
Crankshaft Bearing Shell II-VII, 911/912/914 (65-76)
Part Number: 901.101.132.00
Crankshaft bearing shell II -VII for 911, 912 and 914 models (1965-1977).
$35.88
Crankshaft Drive Gear, All 356's/911/912/914 (50-77)
Part Number: 901.102.115.00
Brass distributor drive gear for all 356 (1950-1977), 911 (1965-1977), 912 (1965-1969), 914 (1970-1976) and 930 (1975-1977) models.
$69.95
Crankshaft Gear Spacer (65-77)
Part Number: 901.102.145.00
Crankshaft gear spacer for 1965-1977 models.
$42.51
Crankshaft Pilot Bearing, 911/914 (65-79)
Part Number: 901.102.025.01
Crankshaft pilot bearing for 911 and 914 (1965-1979) models.
$28.41
Crankshaft Pilot Bearing, 914/912E/924
Part Number: 111.105.313.A
Crankshaft pilot bearing for 914-4, 912E and 924 models.
$9.95
Crankshaft Pliot Bearing Washer, 914/912E
Part Number: 111.105.311
Felt washer for crankshaft pilot bearing on 914-4 and 912E models.
$0.50
Crankshaft Seal Tool
Part Number: 10.0536.011
Crankshaft seal tool, crankshaft mount portion.
$409.20
Crankshaft Seal Tool, Complete
Part Number: 10.0536.012
Complete crankshaft seal tool.
$722.11
Crankshaft Seal Tool, Mount Portion
Part Number: 10.0536.013
Crankshaft seal tool - mount portion.
$359.89
Crankshaft Timing Gear (50-76)
Part Number: 111.105.223
Aftermarket crankshaft timing gear for 356 Pre-A, 356A, 356B, 356C, 911, 912, 914-4 and 912E models.
$97.50
Crankshaft, 71mm, 2.0, 914 (70-76)
Part Number: 004 4371
71mm stroke type 4 crankshaft for 914 models (1970-1976). Fits 2.0 journal.
$549.95
Crankshaft, 76mm, 2.0, 914 (70-76)
Part Number: 004 4376
76mm stroke type 4 crankshaft for 914 models (1970-1976). Fits 2.0 journal.
$589.95
Crankshaft, 78mm, 2.0, 914 (70-76)
Part Number: 004 4378
78mm stroke type 4 crankshaft for 914 models (1970-1976). Fits 2.0 journal.
$589.95
Crankshaft, 80mm, 2.0, 914 (70-76)
Part Number: 004 4380
80mm stroke type 4 crankshaft for 914 models (1970-1976). Fits 2.0 journal.
$589.95
Crankshaft, 82mm, 2.0, 914 (70-76)
Part Number: 004 4382
82mm stroke type 4 crankshaft for 914 models (1970-1976). Fits 2.0 journal.
$549.95
Cylinder Head Temperature Sensor, 912E/914 (70-76)
Part Number: 311.906.041A
Cylinder head temperature sensor for 912E and 914 (1970-1976) models.
$14.50
Dowel Pin, 8mm x 10mm
Part Number: 900.197.010.00
Dowel pin for shifters for all models.
$0.88
Engine Bay Seal Channel, 914 (70-76)
Part Number: 914.501.825.10
"S" shaped channel to hold the engine bay seal for 914 models (1970-1976).
$33.00
Engine Bay Shroud Seal Kit, 914 (70-76)
Part Number: SMC.504.155.10
This kit includes the front seal (part # 914.504.155.10), rear seal (part #914.504.117.10), left seal (part#914.504.157.10) and right seal (part# 914.504.158.10). It fits all 914 models (1970-1976).
$68.41
Engine Bay Shroud Seal, Front 914 (70-76)
Part Number: 914.504.155.10
Front engine bay shroud seal for 914 models (1970-1976).
Was: $22.10
Now: $15.47
On Sale
Engine Bay Shroud Seal, Left, 914 (70-76)
Part Number: 914.504.157.10
Left engine bay shroud seal for 914 models (1970-1976).
$19.81
On Sale
Engine Bay Shroud Seal, Rear 914 (70-76)
Part Number: 914.504.117.10
Rear engine bay shroud seal for 914 models (1970-1976).
$22.10
Engine Bay Shroud Seal, Right, 914 (70-76)
Part Number: 914.504.158.10
Right engine bay shroud seal for 914 models (1970-1976).
$19.81
Engine Case Holder
Part Number: SMC.013.00
Engine case holder for all Porsche engines. Fits any standard roll away stand. It has three holes, but a fourth hole may be needed in order to fit a universal stand.
$103.24
Engine Compartment Cover, 914/914-6 (70-76)
Part Number: 914.512.022.10
Engine compartment cover for 914-4 and 914-6 (1970-1976) models.
$187.75
Engine Drain Funnel Grommet, 914 (70-76)
Part Number: 999.702.091.50
$12.41
On Sale
Engine Gasket Set, 914 (70-73)
Part Number: 100.904.107
Engine gasket set for 914 models (1970-1973). You will also need (1) 029.105.245.B and (1) 021.105.247.A.
$39.98
Engine Gasket Set, 914 (74-75)
Part Number: 10.0904.108
Engine gasket set for 914 (1974-1975) models.
$60.05
Engine Gasket Set, 914/912E (73-76)
Part Number: 039.198.009
Engine gasket set for 914 and 912E (1973-1976) models.
$59.41
Engine Mount, 914-4/912E (73-76)
Part Number: 039.199.231
Engine mount for 912E (1976) and 914 (1973-1976) models.
$16.10
Engine Seal Ring, 14mm x 18mm (65-76)
Part Number: 900.123.007.30
Engine seal ring for the oil pressure sending unit on 911, 912, 914, 930 and 912E models.
$0.43
Engine Shroud Screw with Washer, 6mm x 10mm (56-77)
Part Number: N.010.710.8
Engine shroud screw with washer for 356A, 356B, 356C, 911 and 914 (1955-1977) models.
$0.15
Engine Stand, 356/911/912/914/930 (50-89)
Part Number: SMC.002.00
Forged steel engine stand for 356 (1950-1965), 912 (1965-1969), 911/930 (1965-1989) and 914 (1970-1976) models.
$289.25
Engine Valve Guide, 914 (1.7, 1.8)
Exhaust valve guide for 914-4 models with 1.7 and 1.8 engines.
$5.29
Engine Valve Guide, 914 (2.0)/912E
Part Number: 039.101.421
Exhaust valve guide for 914-4 with 2.0 engine and 912E models.
$6.35
Engine Valve Guide, 914 (70-75)
Part Number: 021.101.403.A
Intake valve guide for 914-4 models with 1.7, 1.8 and 2.0 (thru Eng# GB 0 010 049, Eng# GC 0 001 320) engines.
$4.95
Engine Valve Guide, 914/912E (75-76)
Part Number: 039.101.403
Intake valve guide for 914-4 (from Eng# GB 0 010 050, Eng# GC 0 001 321) and 912E models.
$5.10
Exhaust Valve, 911E/911S/911T/914-4/914-6
Part Number: 901.105.408.50
Exhaust valve for 911E (1969), 911S (1967), 911T (1969), 914-4 (1972) and 914-6 (1970-1971) models. Six required.
$49.87
Exhaust Valve, 914 (2.0)/912E
Part Number: 039.109.611.L

36mm exhaust valve for 914-4 with 2.0 engines and 912E models.
$20.50
Float, 911/912/914 (65-76)
Part Number: 901.100.807.00
Float for 911 (1965-1973), 912 (1965-1969), 914 (1970-1976) models.
$120.08
Flywheel Bolt Lock Plate, 914/912E
Lock plate for flywheel bolts on 914-4 and 912E models.
$1.78
Flywheel Hexagon Bolt With Washer, 914/912E
Part Number: N.014.336.B
Hexagon headed flywheel bolt with washer for 914-4 and 912E models. Five required.
$7.25