Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 914/914-6 (70-76) > Engine & Fuel Systems > 914-6 Engine Block

Alternator Harness Grommet, 914 (70-76)
Part Number: SMC.914.765.36
Alternator harness for wiring harness behind the alternator for 914 (1970-1976) models.
$7.80
Alternator V Belt (65-89)
Part Number: 999.192.176.50
Alternator V belt for 911, 914-6 and 930 models (1965-1989).
$12.05
Alternator, 914 (70-76)
Part Number: 911.603.118.00
770 W alternator for 914 (1970-1976) models.
$854.00
Alternator, Remanufactured, 914 (70-76)
Part Number: AL75X
Remanufactured alternator for 914 (1970-1976) models.
$108.75
Alternator, Remanufactured, 914 (70-76)
Part Number: BOA110
Remanufactured alternator for 914 (1970-1976) models.
$108.75
Alternator, Remanufactured, 914 (70-76)
Part Number: 022.903.023.AX
12V, 50 amp remanufactured alternator for 914 (1970-1976) models.
$255.00
Camshaft Chain Rail Bolt, 911/914-6 (65-89)
Part Number: 901.105.226.03
Bolt to support the camshaft chain rails on 911 and 914-6 models (1965-1989).
$21.49
Camshaft Cover Flange (65-89)
Part Number: 930.105.196.00
Camshaft cover flange for 911, 912, 914/6 and 930 models.
$44.16
Chain Tensioner Rebuild Kit, 911/930/914 (65-83)
Part Number: 911.105.901.01
Repair kit for "049" & "053" tensioners. Fits 911, 930 and 914 (1965-1983) models. One needed per tensioner.
$41.76
Chain Wheel Support, Left, 911/914-6 (65-79)
Part Number: 901.105.505.02
Camshaft chain wheel support for the left side on 911 and 914-6 models (1965-1979).
$255.60
Chain Wheel Support, Right, 911/914-6 (65-79)
Part Number: 901.105.506.02
Camshaft chain wheel support for the left side on 911 and 914-6 models (1965-1979).
$255.60
Claw Pole Rotor Repair Kit, 914 (70-76)
Part Number: 021.903.220
Claw pole rotor repair kit for 914 (1970-1976) models.
$6.63
Complete Engine Gasket Set, 911/914 (2.0L)
Part Number: SMC.100.902.01
Engine gasket set for 911 (1965-1969) and 914-6 (1970-1972) models.
$383.92
Connecting Rod, 914, 1.8 (70-76)
Part Number: 022.105.401.041
Connecting rod for a 914 models (1970-1976) with a 1.8V/1.8 engine. Four required.
$198.00
Copper Washer, 12 x 16 x 1.5 mm
Part Number: 900.123.005.00
Copper Washer, 12 x 16 x 1.5 mm, for 911 (1965-1988), 911 Carrera (1989), 911 Speedster (1989), 911 Turbo (1989, 1991), 914 2.0L H6 (1972), 914-6 (1970-1971) and 930 (1978-1979) models.
$0.07
Crankcase Stud, 911/930 (74-89)
Part Number: 999.061.056.02
10mm x 15mm. One required.
$2.98
Crankshaft Bearing Shell I, 911/912/914 (65-76)
Part Number: 901.101.131.00
Crankshaft bearing shell I for 911 (1965-1977), 912 (1965-1969) and 914 (1970-1976) models. Two required.
$59.74
Crankshaft Bearing Shell II-VII, 911/912/914 (65-76)
Part Number: 901.101.132.00
Crankshaft bearing shell II -VII for 911, 912 and 914 models (1965-1977).
$35.88
Crankshaft Drive Gear
Part Number: 901.102.115.00
Brass distributor drive gear.
$69.95
Crankshaft Gear Spacer (65-77)
Part Number: 901.102.145.00
Crankshaft gear spacer for 1965-1977 models.
$42.51
Crankshaft Seal Tool
Part Number: 10.0536.011
Crankshaft seal tool, crankshaft mount portion.
$409.20
Crankshaft Seal Tool, Complete
Part Number: 10.0536.012
Complete crankshaft seal tool.
$722.11
Crankshaft Seal Tool, Mount Portion
Part Number: 10.0536.013
Crankshaft seal tool - mount portion.
$359.89
Engine Bay Seal Channel, 914 (70-76)
Part Number: 914.501.825.10
"S" shaped channel to hold the engine bay seal for 914 models (1970-1976).
$33.00
Engine Bay Shroud Seal Kit, 914 (70-76)
Part Number: SMC.504.155.10
This kit includes the front seal (part # 914.504.155.10), rear seal (part #914.504.117.10), left seal (part#914.504.157.10) and right seal (part# 914.504.158.10). It fits all 914 models (1970-1976).
$68.41
Engine Bay Shroud Seal, Front 914 (70-76)
Part Number: 914.504.155.10
Front engine bay shroud seal for 914 models (1970-1976).
Was: $22.10
Now: $15.47
On Sale
Engine Bay Shroud Seal, Left, 914 (70-76)
Part Number: 914.504.157.10
Left engine bay shroud seal for 914 models (1970-1976).
$19.81
On Sale
Engine Bay Shroud Seal, Rear 914 (70-76)
Part Number: 914.504.117.10
Rear engine bay shroud seal for 914 models (1970-1976).
$22.10
Engine Bay Shroud Seal, Right, 914 (70-76)
Part Number: 914.504.158.10
Right engine bay shroud seal for 914 models (1970-1976).
$19.81
Engine Case Holder
Part Number: SMC.013.00
Engine case holder for all Porsche engines. Fits any standard roll away stand. It has three holes, but a fourth hole may be needed in order to fit a universal stand.
$103.24
Engine Compartment Cover, 914/914-6 (70-76)
Part Number: 914.512.022.10
Engine compartment cover for 914-4 and 914-6 (1970-1976) models.
$187.75
Engine Drain Funnel Grommet, 914 (70-76)
Part Number: 999.702.091.50
$12.41
On Sale
Engine Stand, 356/911/912/914/930 (50-89)
Part Number: SMC.002.00
Forged steel engine stand for 356 (1950-1965), 912 (1965-1969), 911/930 (1965-1989) and 914 (1970-1976) models.
$289.25
Engine Valve Guide, 911/914-6/930/911 Turbo (65-92)
Part Number: 930.104.321.50
Intake and exhaust valve guide for 911, 914-6, 930 and 911 Turbo models (1965-1992).
$9.41
Engine Valve Guide, 911/930/914-6 (65-89)
Part Number: 901.104.321.51
Canyon engine standard valve guide for 911(1965-1989), 930 (1978-1979) and 914/6 (1970-1972) models. Six required.
$7.48
Exhaust Valve Cover, Lower (68-92)
Part Number: 930.105.116.00
Lower exhaust valve cover, left or right, for 911, 914-6, 930 and 911 Turbo models (1968-1992). Two required.
$110.04
Exhaust Valve, 911E/911S/911T/914-4/914-6
Part Number: 901.105.408.50
Exhaust valve for 911E (1969), 911S (1967), 911T (1969), 914-4 (1972) and 914-6 (1970-1971) models. Six required.
$49.87
Fan Alternator Housing Shroud (225mm), 911 RSR/906/914/6GT
Part Number: 901.106.103.00R
While the 911 series engines were always fitted with fan rings and fan wheels in the size 245mm, the racing engines were always equipped with the small 225mm fan impeller and blower ring.
$699.95
Fan Housing Strap (65-94)
Part Number: 964.106.251.20
Fan housing strap for 911 (1965-1989), 930(1976-1989), 914-6(1970-1972), C2/C4 (1989-1994), 911Turbo(1990-1994). Correct cheese head bolt (part number 900.067.020.02) is included.
$56.68
Flywheel Bolt Lock Plate, 911 (65-77)
Part Number: 901.102.162.04
Flywheel bolt lock plate for 911 (1965-1977) models.
$60.07
Flywheel Bolt, 911/930/914 (70-77)
Part Number: 911.102.171.00
Genuine flywheel bolt. 6 required.
$12.12
Front Engine Mount, 914-6 (70-72)
Part Number: 914.375.049.00
Front engine mount for 914-6 (1970-1972) models.
$159.21
Front Flywheel Crankshaft Seal, 911/914
Part Number: 999.113.057.52
Crankshaft seal for rear pulley on all 911 and 914 models.
$8.21
Front Intermediate Shaft Bearing (65-09)
Part Number: 996.101.435.70
Standard size front intermediate shaft bearing for 911, 914-6, 930, 911 Turbo, C2 and C4 models. Two required.
$15.41
Gasket, 911/912/914 (65-76)
Part Number: 911.110.391.00
Gasket for Weber carburetor top to air horn. Fits 911, 912 and 914 (1965-1976) models.
$1.50
Half Main Bearing Shell, 911/912/914 (65-76)
Part Number: 901.101.132.65
One half main bearing shell.
$44.45
Hydraulic Chain Tensioner, 911/930/914-6 (65-83)
Part Number: 930.105.053.00
Hydraulic chain tensioner. The narrower mount produces less stress on the tensioner. The "053" tensioner was the last non-pressure fed hydraulic unit. In fits 911 up to engine#64D3716 (1983), 930 up to engine # 67D0712, and 914-6 models.
$610.00
Intake Valve Cover, Upper, 911/914-6/911Turbo (65-92)
Part Number: 901.105.115.03
Upper intake valve cover for 911 (1965-1989), 914-6 (1970-1972), Turbo (1990-1992). Two required.
$345.75
Intake Valve, 914, 1.8 (70-76)
Part Number: 022.109.601
Currently unavailable
$31.13
Intermediate Shaft Gear, 911/914/930/911Turbo (69-92)
Part Number: 100.481.136 10
Intermediate shaft gear, size 0. Fits 911, 914, 914/6, 930 and 911 Turbo (1969-1992) models.
$245.25
Intermediate Shaft, 911/914-6/930/911Turbo (65-89)
Part Number: 930.105.013.11
Intermediate shaft, size 1. Fits 911, 914-6, 930 and 911Turbo (1965-1989) models.
$910.80
Intermediate Shaft, 911/914-6/930/911Turbo (65-89)
Part Number: 930.105.013.01
Intermediate shaft, size 0. Fits 911, 914-6, 930 and 911Turbo (1965-1989) models.
$1,057.84
Oil Splash Tube, 911/914-6 (74-77)
Part Number: 901.105.362.01
Oil splash tube inside camshaft housing that lubricates the camshaft and rocker arms. Fits 911 (1974-1977) and 914-6 (1970-1972) models. Two needed.
$95.25
Pressure Control Unit
Part Number: SMC.000.117
Pressure Control Unit with regular hose line connections or "AN" threaded line connections.
$107.69
Rear Intermediate Shaft Bearing Set (65-09)
Part Number: 996.101.137.80
Set of two rear intermediate shaft bearings for 911, 914-6, 930, 911 Turbo, C2 and C4 models.
$23.38
Rocker Arm Shaft (65-94)
Part Number: 901.105.342.04
Rocker arm shaft for 911, 914-6, 911 Turbo, C2, and C4 models (1964-1994).
$19.13
Rocker Arm Shaft Viton O-Ring Set (65-94)
Part Number: SMC.0579.052
Twenty-four arm shaft seals. Original design, black Viton with a rounded outer edge. One set per engine.
Was: $41.95
Now: $33.26
On Sale
Rocker Shaft Seal, 911/914-6/930/C2/C4 (65-94)
Part Number: 911.099.103.52
Rocker shaft seal for 911, 914-6, 930, C2, and C4 (1965-1994) performance engines. Twenty four required.
$1.84
Rod Bearing, .25mm, 911/912/914/930 (65-77)
Part Number: 901.101.138.53
Rod bearing for 911 (1965-77), 912 (1965-1969), 914 (1970-1976), 930 (1975-1977) models, .25mm.
$165.50
Rod Bearing, .25mm, 911/912/914/930 (65-77)
Part Number: 901.101.138.63
Rod bearing for 911 (1965-77), 912 (1965-1969), 914 (1970-1976), 930 (1975-1977) models, .25mm.
$165.50
Rubber Gasket (65-98)
Part Number: 111.971.911.A
Rubber gasket for 911, 912, 930, 914, 924, 944, 964, 968, and 993 (1965-1998) models.
$3.14
Speedometer Angle Drive on Transmission , 914 (70-76)
Part Number: 914.318.029.01
Speedometer angle drive for 914 models (1970-1976). The radial sealing ring and o-ring should also be replaced at the same time.
$173.05
Spring Washer, 911/912/930/914 (65-89)
Part Number: 900.028.008.02
Spring washer for cam box cover. Fits 911, 912, 930 and 914 (1965-1989) models.
$0.54
Tensioning Cap For Generator Bosch, 911/912/914 (65-76)
Part Number: 901.603.427.01
Tensioning Cap For Generator Bosch for 911 (1965-1973), 912 (1965-1969), 914 (1970-1976) models.
$17.15
Tensioning Cap for Generator, 911/912/914/930 (65-89)
Part Number: 901.603.428.00
Tensioning Cap for Generator for 911 (1965-1989), 912 (1965-1969), 914 (1970-1976) and 930 (1975-1977) models.
$17.15
Throttle Body Gasket, 2.0, 914 (70-76)
Part Number: 039.133.073
Throttle body gasket for 914 models with 2.0L engines (1970-1976).
$11.42
Timing Chain Cover Gasket Set (68-89)
Part Number: 930.105.191.98
It fits 911(1968-1989), 914(1970-1972) and 930(1978-1979, 1989) and 911 Turbo(1990-1991) models.
$17.41
Timing Chain Cover Seal Washer, 911/914-6/930 (65-92)
Part Number: 900.031.011.30
Washer for timing chain cover seal firs 911, 914-6, and 930 models (1965-1992).
$0.37
Timing Chain Guide Rail, 911/914/930/911 Turbo (65-92)
Part Number: 911.105.222.05
Brown guide rail for timing chain for 911, 930, 914, and 911 Turbo (1965-1992). One per car.
$5.78
Timing Chain w/ Master Link, (65-92)
Part Number: 911.105.529.50
Timing chain with master link for 911, 930, 914 and 911 Turbo models. (1965-1992). Two required.
$63.75
Timing Gear Woodruff Key, 911/930/914-6 (65-89)
Part Number: 901.102.147.00
It fits: 911 (1965-1989), 930 (1977-1989), 914-6 (1970-1971).
$7.25
Trans/Engine Mount, 914/914-6
Part Number: 914.375.025.00
Transmission mount fits 914(1970-1976) and 914/6(1970-1972) two required per car. Engine mount fits 914(1970-1972) two required per car.
Was: $26.84
Now: $24.15
On Sale
V-Belt Pulley Bolt, 911/930/914-6 (65-89)
Part Number: 999.093.005.02
V-belt pulley bolt for 911, 930 and 914-6 models (1965-1989).
$12.84
V-Belt Pulley, 911/914-6 (65-77)
Part Number: 911.102.017.50
It fits: 911 (1965-1977) and 914/6(1970-1972) models.
$358.51
Valve Spring Seat, 911/914-6/930/C2/C4 (65-94)
Part Number: 901.105.463.00
Valve spring seat for 911, 914-6, 930 and C2/C4 models (1965-1994). Twelve required.
$11.37
Washer for Case Nut, 911(65-69)/914(70-76)/912E(1976)
Part Number: 999.031.061.02
Early original large style head washer. It fits 2.0L to 2.7L engines. Twenty four required.
$1.21
Windage Tray Baffle Seal, 914 (70-76)
Part Number: 022.101.559
High temperature silicone baffle seal for 914-4 models. Four required.
$4.54
On Sale
Wrist Pin Bushing, 356/911/930/912 (50-83)
Part Number: 911.103.132.00
Wrist pin bushing for all 356's, 911, 912, 914-6, and 930 models (1950-1983).
$5.74