Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 911/930 (74-89) > Transmission & Clutch > Main Shaft & Synchro Rings

2nd Gear Set, 911/930 (70-77)
Part Number: 915.302.902.39
2nd gear set for 911 (1970-1977) models.
$1,556.38
3rd Gear Set, 911/930 (70-77)
Part Number: 923.302.903.23
3rd gear set for 911 and 930 (1970-1977) models.
$1,305.84
911 Throw-out Fork
Part Number: SMC.000.903
911 Throw-out Fork Fits 1972-1974
$135.00
Brake Band Anchor Block (65-88)
Part Number: 911.302.317.01
Brake band anchor block fits 911, 912, 912E, 914-4, 914-6, and 930 models (1965-1988).
$22.78
Deep Groove Ball Bearing, 911 (70-83)
Part Number: 900.052.095.00
Deep groove ball bearing for 911 (1970-1983) models.
$15.90
Gear Shaft, Fifth Gear, 911/912/914 (65-76)
Part Number: 911.302.906.00
Fifth gear shaft for 911, 912, 930 and 914 (1965-1976) models.
$2,391.15
Gear Shaft, Fourth Gear, 911/912/914 (65-76)
Part Number: 904.302.930.10
Fourth gear shaft for 911, 912, 930 and 914 (1965-1976) models.
$2,324.26
Gear Shaft, Second Gear, 911/912/914 (65-76)
Part Number: 911.302.907.00
Second gear shaft for 911, 912, 930 and 914 (1965-1976) models.
$2,386.53
Guide Sleeve, 1st / 2nd Gear, 911/C2/C4 (87-94)
Part Number: 950.304.031.03
1st and 2nd gear guide sleeve for 911 (1987-1989) and C2/C4 (1989-1994) models.
$938.95
Half Bearing Shell, 911/930 Turbo (78-05)
Part Number: 930.101.131.15
Standard size half bearing shell for 911 and 930 Turbo (1978-2005) models.
$175.50
Lock Nut for Transmission Main Shaft (76-88)
Part Number: 930.302.281.00
Lock Nut for Transmission Main Shaft for 911 Turbo (1986-1988), 911 Turbo Carrera (1976-1977), 924 (1979), 924 Turbo (1980) and 930 (1978-1979) models.
$16.69
Main Bearing Set, 25mm, 911 (70-74)
Part Number: 911.101.901.50
Set of crankshaft bearings for 911 (1970-1974) .25mm and under.
$349.84
Main Bearing, 911/C2/C4/993/996/997 (78-11)
Part Number: 964.101.138.54
Main shaft (#8 nose bearing) for 911 (1978-1989), C2/C4 (1989-1994), 993 (1995-1998), 996 (2001-2005) and 997 (2005-2011) models.
$251.50
Main Shaft Seal, 911/930 (76-88)
Part Number: 930.302.332.00
Main Shaft Seal, Transmission Shaft Tube, for 911 Turbo (1986-1988), 911 Turbo Carrera (1976-1977) and 930 (1978-1979) models.
$26.83
Oil Seal, 911/912/914 (65-83)
Part Number: PCG.201.301.00
Oil seal for 911 (1965-1973), 912 (1965-1969) and 914 (1970-1976) models.
$14.60
Pilot Bearing, 911/930 (76-79)
Part Number: 930.102.025.00
Pilot bearing for 911 and 930 (1976-1979) models.
$77.15
Pinion Shaft Bearing (57-86)
Part Number: 915.302.399.06
Pinion shaft bearing for 644, 716, and 741 transmissions (1957-1965, rear only), 911 (1972-1986, front only) and 912E (1976, front only) models.
Was: $210.48
Now: $189.43
On Sale
Pinion Shaft Bearing, Center, 911/924/930 (76-88)
Part Number: 917.301.391.00
Pinion Shaft Bearing, Center, for 911 Turbo (1986-1988), 911 Turbo Carrera (1976-1977), 924 (1979) and 930 (1978-1979) models.
$346.54
Reverse Wheel Gear, 911/930 (78-89)
Part Number: 930.302.223.00
Reverse wheel gear for 911 (1978-1989) and 930 (1975-1977) models.
$455.50
Reverse Wheel Gear, 911/930 (78-89)
Part Number: 930.302.222.00
CURRENTLY UNAVAILABLE
Reverse wheel gear for 911 (1978-1989) and 930 (1975-1977) models.
$569.75
Ring Gear And Pinion, 911/912/914 (65-76)
Part Number: 901.302.901.02
Ring gear and pinion for 911, 912, 930 and 914 (1965-1976) models.
$4,506.42
Rubber O-Ring, 170mm x 3.5mm, 911 (70-83)
Part Number: 999.701.376.40
Rubber o-ring for 911 (1970-1983) models. Measures 170mm x 3.5mm.
$14.60
Rubber O-Ring, 911 (70-83)
Part Number: 999.701.397.40
Rubber o-ring for 911 (1970-1983) models.
$10.10
Rubber Oil Seal, 22mm x 35mm x 8mm (65-83)
Part Number: 999.113.286.40
Rubber oil seal for 911 (1965-1983), 912 (1965-1969) and 914 (1970-1976) models.
$22.74
Rubber Oil Seal, 911 (70-83)
Part Number: 999.113.205.40
Rubber oil seal for 911 (1970-1983) models.
$20.97
Rubber Oil Seal, 911 (70-86)
Part Number: 999.113.175.40
Rubber oil seal for 911 (1970-1986) models.
$19.79
Rubber Oil Seal, 911/912/914 (65-83)
Part Number: 999.113.189.40
Rubber oil seal for 911 (1965-1983), 912 (1965-1969) and 914 (1970-1976) models.
$49.04
Split Pin, 356B/356C/911/912/930 (60-89)
Part Number: N.012.507.1
Split pin for 356B, 356C, 911, 912 and 930 (1960-1989) models.
$0.55
Transmission Thrust Washer, 911 (70-86)
Part Number: 915.302.292.00
Transmission thrust washer for 911 (1970-1986) models.
$38.46
Shifting Sleeve, 1st Gear/Reverse (65-71)
Part Number: 911.302.226.00
Shifting sleeve for 1st gear and reverse fits 911, 912, 914-4, and 914-6 (1965-1971) models.
$432.00
Shifting Sleeve, 1st-2nd Gear, 911/912E (72-76)
Part Number: 915.302.411.00
Shifting sleeve from 1st to 2nd gear for 911 and 912E models (1972-1976).
$307.26
Shifting Sleeve, 2nd-5th (65-74)
Part Number: 911.302.411.10
Shifting sleeve for 2nd through 5th gears fits 911, 912, 914-4, and 914-6 models (1965-1974).
$197.10
Shifting Sleeve, 3nd-4th (75-86)
Part Number: 911.302.411.20
It fits 911 (1975-1986), 930(1976-1988), 912E(1976), 924 4th to 5th gear models.
$260.66
Shifting Sleeve, 5th Gear/Reverse, 911/912E (72-86)
Part Number: 915.302.227.09
Shifting sleeve for 5th gear and reverse fits 911 and 912E models (1972-1986).
$790.00
Shifting Sleeve, 911/930 (77-88)
Part Number: 930.302.411.02
1st gear to 2nd gear shifting sleeve for 911 (1977-1986) and 930 (1977-1988) models.
$287.04
Intermediate Shaft Gear "0"
Part Number: 930.105.136.00
Intermediate Shaft Gear "0". It fits 911(1968-1969 with modified 6 bolt gear), 930 (1978-1979), 914/6 (1972), 911 Turbo(1989-1992) models.
$274.14
Main Shaft Bearing, 911/912E/930/924 (72-86)
Part Number: 999.052.030.00
Center main shaft bearing for 911, 912E, 930 and 924 models (1972-1986). Please note this model only fits 5 speed transmissions on the 924 models.
$62.23
Main Shaft Bearing, Center, 911 (89-11)
Part Number: 999.052.098.00
Center main shaft bearing for 911 (1989-2011) models.
$310.95
Main Shaft Bearing, Front, 911/930/912E (72-86)
Part Number: 999.110.025.00
Front main shaft bearing for 911, 912E and 930 models (1972-1986).
$125.00
Main Shaft Bearing, Rear, 911/912E (72-83)
Part Number: 999.110.032.00
Rear main shaft bearing for 911 and 912E models (1972-1983).
$40.00
Reverse Gear, 911/930 (78-89)
Part Number: 930.302.221.00
Reverse gear for 911 and 930 (1978-1989) models.
$229.41
Synchro Hub, 2nd Gear, 930 (76-88)
Part Number: 10.1550.318
Synchro hub, 2nd gear, for 930 (1976-1988) models.
$198.10
Synchro Hub, 3rd/4th Gear, 930 (76-88)
Part Number: 10.1550.319
Synchro hub, 3rd and 4th gear, for 930 (1976-1988) models.
$167.54
Synchro Hub, 1st Gear, Asymmetrical (77-86)
Part Number: 915.302.241.14
Asymmetrical synchro hub, 1st gear, for 1977-1986 models.
$199.80
Synchro Hub, 2nd Gear (72-86)
Part Number: 915.302.242.00
If fits: 911 - 1st Gear (symmetrical) (1972-1976), replacement teeth will also require; (1) 915.302.315.01 block, (2) 915.302.316.01 bands, (1) 915 302 321 00 block, 911 2nd Gear (1972-1986), 912E 1st Gear (symmetrical), replacement teeth will also require; (1) 915.302.315.01 block (2) 915.302.316. 01 bands (1) 915.302.321.00 block.
$195.51
Synchro Hub, 3rd/4th/5th Gear (72-86)
Part Number: 901.302.242.03
Synchro hub gear teeth for 3rd, 4th and 5th gear.
$183.66
Synchro Ring, 1st/2nd Gear, 930 (76-89)
Part Number: 930.302.301.00
Synchro ring for 1st and 2nd gear for 930 models (1976-1989). Two required.
$145.15
Synchro Ring, 3rd/4th Gear, 930 (76-89)
Part Number: 930.302.303.00
Synchro ring for 3rd and 4th gear for 930 models (1976-1989). Two required.
$129.00
Synchro Ring, 901/902/911/915/923
Part Number: 911.302.301.06
Original design synchro ring for: 901/902/911 (1st, 2nd, 3rd, 4th and 5th gear), 915/923(1972-1976) (3rd, 4th and 5th gear), 915 (1977-1986) (3rd, 4th and 5th gear). Can also use alternate # 911.302.301.08 for improved shifting.
$88.41
Synchro Ring, 915
Part Number: 915.302.301.04
-1st and 2nd gear (72-76 911)
-2nd gear (77-86 911, non-turbo)
$114.50
Synchro Ring, 915 , 1st Gear
Part Number: 915.302.301.06
Synchro ring, 915, 1st gear.
$118.64
Gear Box Synchro, 2.4/2.7, 915 (73-77)
Part Number: 915.302.901.05
Gear box synchro 915 models (1973-1977) with 2.4 and 2.7 engines.
$48.40
Trans Gear Lock Ring, 3rd/4th Gear, 930 (76-89)
Part Number: 930.302.311.00
Transmission gear lock ring for 3rd and 4th gear. Fits 930 models (1976-1989). Two required.
$87.00
Inner Gear Needle Bearing
Part Number: 999.201.470.00
It fits 911 1st-5th Gear (1965-1986), 912 1st-5th Gear (1965-1969), 930 3rd-4th Gear (1976-1988), 912E 1st-5th Gear (1976), 914/4 1st-5th Gear (1970-1976), 914/6 1st-5th Gear (1970-1972), 924 (5 Speed) 4th-5th Gear, 924 Turbo 4th-5th Gear models.
$175.35
Needle Cage Bearing, 911/912E (72-86)
Part Number: 999.201.107.00
Needle cage bearing for rear gear transmission. This fits 911 and 912E models (1972-1986).
$12.50
Brake Band (65-88)
Part Number: 911.302.316.08
Brake band for 911, 912, 912E, 914-4, 914-6, 924, and 930 models (1965-1988).
$12.65
Brake Band Anchor Block, 911/912E (72-76)
Part Number: 915.302.321.00
Brake band anchor block for 1st to 2nd gear. Fits 911 and 912E models (1972-1976). Two required.
$16.00
Brake Band Energizer (65-88)
Part Number: 930.302.325.00
Brake band energizer fits 911, 912, 912E, 914-4, 914-6, 924, and 930 models (1965-1988).
$11.15
Brake Band, 911/912E/928 (72-84)
Part Number: 915.302.316.01
Brake band for 911, 912E and 928 models (1972-1984). Two required.
$6.23
Double Brake Band, 1st Gear, 911/930 (76-89)
Part Number: 928.302.319.08
Double band brake band for 1st gear for 911 and 930 models (1976-1989).
$37.08
Double Brake Band, 2nd Gear, 911/928/930 (76-89)
Part Number: 928.302.318.01
Double band brake band for 2nd gear for 911, 930 and 928 models (1976-1989).
$53.55
Transmission Stop Block, 1st Gear, (65-76)
Part Number: 901.302.318.02
CURRENTLY UNAVAILABLE
Transmission stop block for 1st gear. Fits 911, 912 and 914 models (1965-1976).
$27.75
Transmission Stop Block, 2nd Gear (72-86)
Part Number: 915.302.315.01
Transmission anchor stop block for 2nd gear. Fits 911, 912E, 924 and 925 models. (1972-1986)
$21.50
Anchor Block, 1st Gear, 930/928 (76-89)
Part Number: 928.302.320.01
Anchor block for 1st gear for 930 and 928 models (1976-1989). Please note that this fits 2nd gear for 928 models.
$13.50
Anchor Block, 1st-3rd, 911/924/928 (75-85)
Part Number: 928.302.321.00
Anchor block for 1st through 3rd gears for 911, 924 and 928 models (1975-1985). Three required.
$11.98
Anchor Block, 2nd Gear, 930 (76-89)
Part Number: 928.302.322.00
Anchor block for 2nd gear for 930 (1976-1989).
$22.95
Pinion Shaft Lock Nut, 930 (76-89)
Part Number: 930.302.453.00
Currently unavailable
$16.53
Adjusting Shim, 915 Trans, 911 (72-89)
Part Number: 915.302.268.03
Adjusting shim for 915 transmissions for 911 models (1972-1989).
$11.10
Main Shaft Seal, 911 (87-98)
Part Number: 999.113.326.41
Main shaft seal.
$14.45
Pinion Shaft Nut
Part Number: 915.302.282.00
Lock nut for transmission pinion shaft.
$11.22
Transmission Lock Nut
Part Number: 999.034.033.00
Lock nut for transmission.
$10.02
Main Shaft Lock Nut, Small, 930 (76-89)
Part Number: 930.302.451.00
Small transmission main shaft lock nut for 930 models (1976-1989).
$9.15
Synchro Lock Ring
Part Number: 930.302.333.01
Synchro lock ring
$2.41
Trans Gear Circlip, 3rd/4th Gear, 930 (76-89)
Part Number: 930.302.313.01
Transmission gear circlip for 3rd and 4th gear. Fits 930 models (1976-1989). Two required.
$5.15
Transmission Ring Snap Gear, 911/912E (72-86)
Part Number: 915.302.311.01
Transmission ring snap gear for 1st to 2nd gear. Fits 911 and 912E models (1972-1986). Two required.
$9.80