Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 911/930 (74-89) > Tools, Books & Accessories > Tools

3M Electrical Tape
Part Number: 16578
General purpose vinyl insulating tape with excellent resistance to abrasion, moisture, alkalies, acid, copper corrosion, and varying weather conditions. Can be used as a primary electrical insulation for all wire and cable splices rated up-to 600 volts. Measures 3/4in wide x 60ft long x .007in thick.
$4.50
3M Strip Calk, Black, 1 Ft.
Part Number: 051135-08578
3M™ Strip-Calk is a soft butyl rubber caulking material that quickly and permanently fills all types of seams, joints and openings – long-lasting auto body maintenance and repair in much less time.
$22.00
9191 Camshaft Securing Tool, 911 (80-89)
Part Number: 000.721.202.00
9191 camshaft securing tool used to adjust the valves or set the cam timing. For 911 (1980-1989) models.
$88.75
Aluminum Racing Jack, Two Ton
Part Number: 1532
Dual pump pistons - five pumps to maximum height of 18 inches. Low profile. Aircraft-grade billet aluminum provides strength with maximum weight savings. Two-piece, 45" long handle snaps together for quick set up. Removable, rubber saddle pad protects vehicle and prevents slipping. Meets ANSI PALD, Part 10. 3-1/2" min height. 18" max height. 45" handle length.
$443.55
Baum Tools® Lug Bolt Hole Alignment Tool Set
Part Number: M0030A
For use on cars with 14 X 1.5 mm lug bolts. Includes 2 alignment tools. Use in place of lug bolts to hold wheel in position while installing the other lug bolts.
$44.12
Bilstein Front Shock Absorber Gland Nut Tool, Max. Drehmoment, 140 Nm, MS 08/6
Part Number: SMC.006.21
Bilstein front shock absorber gland nut tool, Max. Drehmoment, 140 Nm, MS 08/6. Installs and removes front shock absorber special retention nut.
$21.95
Camshaft Holder Tool, 911 (65-81)
Part Number: T52.287.017
Camshaft holder tool for 911 (1965-1981) models.
$62.75
Complete Engine Stand
Part Number: P201.313.215
Complete engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It includes the holding fixture(#P201), heavy duty stand(#P313) and flywheel lock(#P215).
$774.95
Compression Tester Kit
Part Number: 56.67
This compression tester kit measures cylinder compression to accurately diagnose any engine problems.
$44.60
Crankcase Vacuum Measurement Tool
Part Number: 10.0881.001
Measures crankcase vacuum to diagnose possible false air leaks (low vacuum) and possible air oil separator failure (high vacuum). Each tool is complete and ready to use for the models specified. Includes system overview and facts for diagnosing many different crankcase vacuum related issues. Also includes info for on-line technical support. For Porsche Boxster/Cayman 1997-2008 & 911 Carrera 1999-2008.
$450.00
Crowfoot Wrench, 46mm
Part Number: T52-287-446
Crowfoot wrench to install and remove cam nuts. 46mm.
$89.95
CV Joint Hex Socket, 12 Point
Part Number: SMC.067.096
Twelve point hex socket (8mm) for CV joints.
$14.00
CV Joint Hex Socket, 6 Point
Part Number: SMC.067.097
Six point hex socket (6mm) for CV joints.
$14.00
Dial Gauge Holder
Part Number: P240
Dial gauge holder to measure the end play of the crankshaft flywheel and pulley. This tool can also be used to measure clearances and run out. Fits Porsche and VW models with and air cooled engine.
$59.95
Dial Tire Air Gauge with Case
Part Number: SMC.000.948
Dial tire air gauge with case.
Was: $39.15
Now: $35.50
On Sale
Dial Tire Air Gauge with Chrome Case
Part Number: PNA.361.100.02
Currently out of stock
$32.74
Distributor Drive Puller Tool (50-76)
Part Number: 79150
Distributor drive puller tool fits from 1950-1976.
$79.50
Door Mirror Extraction Tool, 911/928/924/944 (74-95)
Part Number: SMC.000.002.13
Door mirror extraction tool for 911, 928, 924 and 944 (1974-1995) models.
$22.15
Double Open Ended Wrench, 10mm x 11mm
Part Number: 999.195.012.02
German made double open ended wrench, 10mm x 11mm.
$19.80
Double Open Ended Wrench, 12mm x 13mm
Part Number: 999.195.013.02
German made double open ended wrench, 12mm x 13mm.
$22.44
Double Open Ended Wrench, 14mm x 15mm
Part Number: 999.195.014.02
Double open ended wrench, 14mm x 15mm.
$16.83
Double Open Ended Wrench, 17mm x 19mm
Part Number: 999.195.015.02
German made double open ended wrench, 17mm x 19mm.
$22.52
Double Open Ended Wrench, 8mm x 9mm
Part Number: 999.195.011.02
German made double open ended wrench, 8mm x 9mm.
$14.93
Engine Stand Flywheel Lock
Part Number: SMC.215
Needed to secure the crank shaft from rotating during R&R OF MOTOR. Used in conjunction with toll# P 201. Where flywheel lock bolts into a machined channel.
$44.95
Engine Stand Heavy Duty Clamp
Part Number: P 313
Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$225.00
Engine Stand Holding Fixture
Part Number: P 201
This exact reproduction engine stand will safely hold all 356, 911, 912, 914 and 930 models with the flywheel bolted to the engine (up to 3.6L). It features a 360 degree swivel mounting collar for a floor stand (not included).
$312.41
Engine Stand w/ Clamp
Part Number: SMC.000.003
Grey engine stand with clamp. Designated to carry the full weight of the air-cooled engine. This clamp is properly suited for a work bench.
$396.95
Extra Long Allen Socket, 8mm, 911/930 (74-89)
Part Number: P243
Solid one piece construction needed to reach bolts of heat exchangers/exhaust systems. The extra long length easily accesses these hard to reach exhaust system bolts. 3/8" drive. Fits 911 and 930 (1974-1989) models.
$44.95
Factory Jack
Part Number: 911.721.011.04
Replace that stolen, worn or rusty jack with this genuine jack. It's easy to operate and easily fits into jack outlets in car to prevent damaging the car.
$172.35
Factory Jack Felt Strip
Part Number: 911.556.208.02
Factory jack felt strip.
$1.15
Factory Jack, 911/930
Part Number: USED.721.011
Looking for the correct jack for your early 911/930?
$295.00
Fan Pulley Wrench, 911 (77-89)
Part Number: 999.571.047.02
JORG fan pulley wrench. It fits 1977-1989.
$44.50
On Sale
Fan Pulley Wrench, 911(65-74)/914-6 (70-72)
Part Number: P208
SIR TOOLS pulley Wrench needed for securing the generator from rotating during R&R of pulley or fan belt.
$44.95
Fan Pulley Wrench, 911(65-74)/914-6(70-72)
Part Number: 911.721.702.00
All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt. It fits all 911 models with 2.0, 2.2 and 2.4 engines.
$35.06
Feeler Gauge (.004'')
Part Number: P213
Feeler gauge holder and one blade (.004") needed for correct adjustment of valve clearance. Come exclusively as shown here with its correct shape for the contour of your hand. Applicable for 356, 911, 912, 912-6 and 930 models.
$7.50
Flywheel Lock Tool (50-76)
Part Number: UN.120.1100
Flywheel lock tool fits from 1950 through 1976.
$22.50
Four Way Dashboard Tool
Part Number: SMC.935.701
Four way dashboard tool used to install and remove switch rings.
$49.16
Golde Sunroof Tool
Part Number: SMC.564.053.00
High quality reproduction sunroof tool made from 300 series stainless steel.
$46.75
Hazet Battery Brush
Part Number: 4650-4
Battery brush and pole for all years and models.
$28.38
Hazet Brake Caliper Cleaning Brush, Brass
Part Number: 3-1-4968
Hazet brake caliper cleaning brush with brass bristles for removing brake dust and dirt in aluminum brake calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$25.40
Hazet Brake Caliper Cleaning Brush, Steel
Part Number: 2-1-4968
Hazet brake caliper cleaning brush will steel bristles for removing brake dust and dirt in calipers. This narrow version with a plastic handle is 225mm in length. For use on all years and models.
$16.70
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-15
Hazet breaker bar with two component handle. Polished chrome finish. Measures 396mm in length. 1/2'' drive.
$102.95
Hazet Breaker Bar, 1/2'" Drive
Part Number: 914-18
Hazet breaker bar with two component handle. Polished chrome finish. Measures 472mm in length. 1/2'' drive.
$113.25
Hazet Breaker Bar, 3/8" Drive
Part Number: 8814
Hazet breaker bar with two component handle. Polished chrome finish. Measures 250mm in length. 3/8'' drive.
$73.50
Hazet Hose Clamp Pliers with Cable
Part Number: 798-16
To remove and install spring type hose clamps with parallel ends.
$263.60
HAZET Nozzle Adjusting Tool
Part Number: 4850-1
The telescopic handle can be used to demonstrate the jet of the nozzles to the window.
$19.70
Hazet Wrench Set
Part Number: SMC.004.002.01
Hazet Vanadium chrome wrench set. This new, German made, wrench set is perfect for your 356, 912 or 911 tool kit.
Set consists of: 17/19mm, 14/15mm, 12/13mm, 10/11mm and 8/9mm.
Was: $78.71
Now: $69.95
On Sale
Hockey Puck, 6 oz.
Part Number: 55.2620.100
Hockey puck measuring 3 inches in diameter. Weighs 6 ounces.
$2.70
Jack Hold Down Strap Replacement, 911/914/930/912E (74-89)
Part Number: 914.722.021.10
This is the rubber strap that holds the jack in place in the trunk. It's a great detail for Concours shows. It fits 911(1974-1989), 914(1970-1976), 912E(1976), 930 (1976-1989) models. Metal clips are not included. Two needed.
$12.51
Jack Hold Down Strap, 911/914/930/912E (74-89)
Part Number: 911.722.021.01
Jack bracket for 911(1974-1989), 914(1970-1976), 912E(1976), 930 (1976-1989) models.
$50.94
Jack Pad (1985 or later)
Part Number: 911466
It fits 993, 996, 997, Boxter, 924S, 944 & 968. Using this solid steel Jack Pad will keep the underpan of your Porsche® smooth and dent free.
$32.95
Jack Pad, 356/912/911/914/930
Part Number: SMC.559.149.20
Jack pad for all 356's (1950-1965), 911 (1965-1989), 912 (1965-1969), 914-4 (1970-1976), 914-6 (1970-1972) and 930 (1976-1989). Designed for use with hydraulic floor jack and it is inserted into the jack receiver.
$22.41
Klein Spark Plug Wrench, 911/914-6 (66-73)
Part Number: SMC.012.203.ACurrently unavailable
$76.41
Lug Nut Tie Down Set
Part Number: 911822
When trailering your car use them in place of lug nuts. Made of superior strength steel and torqued to the same specifications as the standard lug nuts, 90 Ft Lbs. Works on all 5 stud pattern wheels.
$149.50
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.000.953
Reproduction 356A, 356B, 356C Messko leather pouch.
$19.94
Messko Tire Air Gauge Leather Pouch
Part Number: SMC.200.005
Reproduction Messko leather pouch.
$41.64
Messko Tire Air Gauge, Dual Dial
Part Number: SMC.600.002
CURRENTLY UNAVAILABLE

$129.50
Messko Tire Air Gauge, Single Dial
Part Number: SMC.600.004 SM
No longer available
$129.50
Motometer Tire Air Gauge
Part Number: 624.003.2002
Motometer tire pressure gauge with 45mm face. 8-64 Psi, 0.5-4.5 bar.
$26.75
Motometer Tire Air Gauge
Part Number: 624.003.1025
Currently unavailable
$46.50
Motometer Tire Air Gauge
Part Number: 911.722.201.02
MOTOMETER tire air gauge for early Porsche models. This is a great addition to your factory tool kit.
$65.12
Nussbaum Jumbo 7000 Double Scissor Lift
Part Number: JUMBO 7000
Double scissor lift with lifting capacity of 7,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$8,485.00
Nussbaum Jumbo 9000 Double Scissor Lift
Part Number: JUMBO 9000
Double scissor lift with lifting capacity of 9,000 pounds. 4" low profile. Adjustable lifting platform length from 57 1/2" to 81". Install above ground or recessed in floor. Free passage between the scissors. Maximum utilization of workshop space. Perfect for low ceiling or narrow bay applications. Fully hydraulic system. Compact oil-submerged motor. Push button controls. No electrical or pneumatic components. Fast lifting and lowering times.
$10,875.00
Nussbaum SPL10000 Two Post Lift
Part Number: SPL10000M
ALI certified hydraulic asymmetric two post lift with a lifting capacity of 10,000 pounds. 3.5 hp integrated power unit and covered hard-chromed cylinders. 124" bay setting. Fast lifting and lowering times. Variable lowering speed with manual control lever. Mechanical security locks. Self-purging cylinders for powerful lifting and lowering. Protective coverings for column cylinders. Designed for short and long wheelbase vehicles.
$4,295.00
Oil Filter Wrench
Part Number: 000.721.920.40
Oil filter wrench. 3/8'' drive.
$38.50
Oil Line Wrench Set
Part Number: P242
Make your oil line installation and repairs easy with this four pack set. For use on 911, 930, 914/6, 944, 968 and 911 Turbo models. Set includes 27, 30, 32 and 36mm sizes.
$89.00
Oil Seal Arbor, Crankshaft Side
Part Number: P216
Oil seal arbor to install the oil seal on the pulley side of the crankshaft for 911 models (1965-1989).
$84.95
Oil Seal Arbor, Flywheel Side
Part Number: P215
Oil seal arbor to install the oil seal on the flywheel side of the crankshaft for 911 models (1965-1977).
$154.95
Piston Wrist Pin And Circlip Installation Tool
Part Number: 10.0678.106
Piston wrist pin and circlip installation tool. Includes storage case & instruction book.
$1,669.23
Radio Installation Kit
Part Number: SMC.000.444
This is a 32 piece stereo/navigation installation tool kit covers almost all OEM car stereo systems for the last 20 years along with popular systems from Becker, Clarion, Kenwood, Sony, Grundy and Blaupunkt. Includes a custom blow molded case.
$83.25
Radio Removal Tool Key Set
Part Number: SMC.000.445
Simply slide into the required position to allow easy removal of your radio.
$7.95
Red Handled Screw Driver Set
Part Number: SMC.012.025
This European made, red handled screwdriver set includes one #2 Phillips head and one #4 flat head screwdriver. Often missing from tool kits, these screw drivers make a great replacement for the impossible to find originals.
$67.15
On Sale
Screw Driver Set, 911/914-6/930
Part Number: 911.721.107.02
$48.31
Soft Wheel Lock Nut Socket, 19mm
Part Number: SMC.410.003
Soft wheel lock nut socket. Fits all Porsche lock nuts manufactured from 1950 to 1998. Includes plastic sleeve to protect the surface around the bolt. Measures the standard 19mm. Specially recommended for alloy nuts.
$14.95
Spark Plug Wrench
Part Number: 477.012.203.A
Spark plug wrench.
$108.47
Stud Remover Set - 4 Piece, Metric
Part Number: 6987
Designed and tested to reach studs in difficult work areas. 3/8" drive for 6 mm and 8 mm stud sizes, and 1/2" drive for 10 mm and 12 mm stud sizes. Housed in a blow-molded storage case.
$75.95
Synchro Hub Removal Tool, 930 (76-88)
Part Number: P223
4 Speed transmission, 3rd and 4th gear.
$175.00
Synchro Hub Removal Tool, 930 (76-88)
Part Number: P224
For 1st and 2nd gear.
$180.00
Tie Rod End Puller Tool
Part Number: 910673
Designed for Porsche tie rods; our thin wrench gets in where others cannot. Use the 46mm spanner for removing and installing tie rods. It does not work for 911 Turbo.
$79.00
Tire Air Compressor
Part Number: SS-PDQ/06
Don't remove your tire or wait for a tow truck again! Fix your flat in 15 minutes or less and improve your fuel economy!
$29.99
Tire Pressure Gauge
Part Number: 911.722.202.00
A tire pressure gauge is an essential piece of kit for every classic Porsche. In the 1960s and 70s, the tire pressure gauge was included in the tool bag of every new vehicle, and it is now available to buy again.
$60.45
Tool Kit , 911 Carrera
Part Number: 911.721.002.14
Replacement Porsche complete tool kit.
$467.54
Tool Kit, Updated Version, 911/912/914-6
Part Number: 911.721.002.00
Replacement complete tool kit. This kit is the genuine updated version of the original tool kit.
$386.90
Tow Hook & Jack Pad Combination, 911/930
Part Number: 915232
The perfect way to raise the back end without damaging the vulnerable engine case with this jack pad and tow hook combination. Made of 1020 Mild Steel, TIG welded and powder coated red.
$120.65