Classic European
Auto Parts
888-986-4466
323-593-4300 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 911/930 (74-89) > Suspension & Steering > Rear Suspension

Axle Drive Shaft Assembly, 911 (75-85)
Part Number: 923.332.033.02
It fits 911 (1975-1984) and 1985 with 915.68 trans.
$295.75
Axle Drive Shaft Assembly, 911 (85-89)
Part Number: 911.332.024.15
1985 w/915.73 Trans. 1986-1989 (all).
$345.18
Axle Drive Shaft Assembly, 911/912 (69-75)
Part Number: 911.332.033.09
Replace your bent or damaged axle or CV's with a brand new one! Includes new CV joints and boots on both ends.
$280.72
Bilstein Rear Shock Absorber, 911/930 (72-89)
Part Number: SMC.24.001694
STANDARD OPTION CURRENTLY OUT OF STOCK
Bilstein shock absorber for 911 (1972-1989) and 930 (1976-1989).
$209.51
Bilstein Rear Shock Absorber, RSR, Right, 911/930 (72-89)
Part Number: SMC.181.56B
Bilstein RSR rear shock absorber.
$480.53
Boge Rear Shock Absorber, 911/912 (65-71)
Part Number: 901.333.051.01
Currently unavailable
$141.27
Boge Rear Shock Absorber, 911/912E (72-89)
Part Number: 911.333.051.00
Boge rear shock absorber for 911(1972-1989) and 912E(1976) models.
$135.82
Cotter Pin, 4mm x 40mm (65-89)
Part Number: N.012.538.1
Cotter pin for 911, 912, 914, 914-6 and 930 models (1965-1989). Two required. Measures 4mm x 40mm.
$1.40
CV Axle Boot Kit (85-95)
Part Number: 928.332.924.02
Rear CV joint boot kit for 911 (1986-1989), 928 (early 1985-1995), 930 (1985-1989), C2 (1989-1994) and Turbo (1990-1994) models. Fits 911 models from 1985 with 915.73 transmission.
Was: $48.04
Now: $20.35
On Sale
CV Axle Boot, 911/912/930 (69-84)
Part Number: 901.332.293.12
CV axle boot fits 911 (1969 to early 1975 - up to chassis # 911.520.1529 & 911.521.0859), 912 (1969), and 930 (1976-1984) models. Four required.
$7.35
CV Joint Bolt, 911/912/930 (69-89)
Part Number: 900.082.049.02
14 x 100mm CV joint bolt fits 911, 912, and 930 models (1969-1989).
$18.45
CV Joint Gasket, 911/912 (68-75)
Part Number: 901.332.297.00
CV joint gasket for 911 (1968 - Early 1975) and 912 models. Four needed per car.
$2.85
CV Joint Gasket, 911/912E (75-85)
Part Number: 923.332.297.00
CV joint gasket for 911 and 912E models (1975-1985).
$2.78
CV Joint Roll Pin, 911/912 (65-77)
Part Number: 999.095.019.00
Clamping pin for the rear axle for 911 and 912 models.
$2.96
CV Joint, 911 (72-75)
Part Number: 911.332.032.02
CV Joint fits 911 models (1972-1975).
$269.09
CV Joint, 930 (76-84)
Part Number: 930.332.034.00
CV Joint fits 930 (1976-1984). Four required.
$68.09
Drive Shaft, 911/930 (84-89)
Part Number: 930.332.232.05
Drive shaft for 911 and 930 models (1984-1989). Two required.
$422.69
Eccentric Bolt, 911 (76-89)
Part Number: P/N
Eccentric bolt for rear torsion bar fits 911 (1976-1989) models. Two required.
$19.04
On Sale
Eccentric Bolt, 911/912 (65-89)
Part Number: USED.133.05
No longer available
$26.50
Eccentric Bolt, 911/912/930/912E
Part Number: 901.333.133.05
Part # 901.333.133.00 was SUPERSEDED to part # 901.333.133.05. Eccentric bolt for rear torsion bar fits 911 (1974-1989) and 930 (1976-1989). Two required.
$9.63
Eccentric Bolt, 911/912/930/912E
Part Number: 911.333.305.00
Eccentric bolt for rear torsion bar fits 911 (1974-1979), 912E(1976) and 930 (1976-1979) models. Two required.
$10.74
Eccentric Bolt, 911/912/930/912E
Part Number: 901.333.133.10
Eccentric bolt for rear torsion bar fits 911 (1965-1973) and 912 (1965-1969). THIS ITEM IS SUPERSEDED FROM 901.333.133.03 AND 911.333.133.09. Two required.
$19.48
Eccentric Bolt, 911/912/930/912E
Part Number: 901.333.133.06
Eccentric bolt for rear torsion bar fits 911 (1974-1979), 912E (1976) and 930 (1976-1979) models.
$25.50
Elephant Racing Front Monoball Cartridge Set, 911 (65-89)
Part Number: 2011000
Fit easily into the stock camber plates of 67-89 911/912/930 cars (911.341.018.00). Cars with pre-67 camber plates are recommended to switch to a 67-89 camber plate for fitment. 65 cars without camber plates require grinding to enlarge the strut top opening to allow fitment of the cartridges. OEM equivalent 911.341.018.00.
$314.28
Elephant Racing Poly Bronze Spring Plate Bearings, 911 (68-89)
Part Number: 2061501
Superior to plastic bushings, Elephant Racing's bearings deliver zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality. PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Re-lubrication is simple with provided grease fittings.
$382.85
Elephant Racing Rubber Spring Plate Bushing Kit, 911/912/930 (67-89)
Part Number: 2290003
Stock Spec Bushings A true stock spec bushing replacement for spring plates. Spring plate bushing condition can be accessed by looking at the hole in the spring plate cover. It should be concentric around the spring plate. When the bushings deform, the cover becomes non-concentric around the spring plate and in extreme cases actually contacts the cover plate – metal-to-metal. More than just bushings, this is a full kit that includes inner and outer bushings (4 pcs), adhesive, instructions, long bolts to press in the bushings, and abrasive cloth to prep the surface. Rubber is the choice if you want to restore factory ride and performance in a zero-maintenance solution. Check our PolyBronze Bearings for a high-performance solution.
$123.07
Hex Head Bolt
Part Number: 900.075.042.02
Hexagon head bolt.
$2.81
Hexagon Head Bolt M14 x 1.5 x 130, 911 Turbo (75-77)
Part Number: 900.082.062.02
Hexagon Head Bolt M14 x 1.5 x 130 for 911 Turbo (1975-1977) models.
$6.56
Hexagon Head Bolt, 10mm x 30mm (60-91)
Part Number: 900.075.043.02
Hexagon head bolt for 356B, 356C, 911, 912, 930, 924 and 928 models. Measures 10mm x 30mm.
$2.25
KONI Rear Shock Absorber (72-74)
Part Number: 821756
KONI rear shock absorber for 911 models (1972-1974). Two required.
$285.60
KONI Sport Rear Shock Absorber, 911/930/912E (75-89)
Part Number: 301214
KONI Sport rear shock absorber for 911, 930 and 912E models (1975-1989). Two required.
$266.86
KYB Rear Shock Absorber, 911/912E (72-89)
Part Number: KG5542
Rear shock absorber for 911 (1972-1989) and 912E (1976) models. Two required.
$59.58
Lock Nut (74-95)
Part Number: 900.910.092.02
Lock nut for 911 (1974-1989), 930 (1975-1977), 924 (1976-1988), 944 (1982-1991) and 968 (1992-1995) models.
$7.41
Lock Nut M22 X 1.5, 911/924/928/944/968 (78-95)
Part Number: 900.910.093.02
Lock Nut M22 X 1.5, 911 (1984-1989), 924 (1986-9188), 928 (1978-1995), 944 (1985-1991) and 968 (1992-1995) models.
$6.09
Lock Nut, 12mm x 1.5mm, 911/912/924/928 (65-89)
Part Number: 999.084.445.09
Lock nut for 911, 912, 924 and 928 (1965-1989) models. Measures 12mm x 1.5mm.
$2.20
Magic-Lube Bushing Grease
Part Number: SMC.000.822
Magic-Lube is ideal for use on plastic suspension bushings. This waterproof, non-melting grease forms a tough protective film.
$14.95
Rear Axle Assembly Nut, 911/930 (65-86)
Part Number: 900.078.017.02
Rear axle assembly nut for 911 and 930 models (1965-1986).
$2.75
Rear Axle Bearing Sleeve, 911/930 (76-89)
Part Number: 930.331.609.00
Crush sleeve for rear wheel bearing fits 911 and 930 models (1976-1989).
$147.06
Rear Axle Boot Clamp, 74mm, 911/912/930/928 (69-85)
Part Number: 999.512.486.00
Rear axle boot clamp for 911, 912, 930 and 928 models. (1969-1985) Four required.
$1.53
Rear Axle Boot Kit, 911 (89-94)
Part Number: 000.043.301.08
Rear axle boot kit for 911 (1989-1994) models.
$62.43
Rear Axle Castle Nut, 911/912/914/930 (65-89)
Part Number: 901.332.806.00
Rear axle castle nut fits 911, 912, 914 and 930 (1965-1989) models. Two required.
$15.27
Rear Axle Cross Tube, 911/930 (78-88
Part Number: 930.331.010.02
CURRENTLY UNAVAILABLE
Rear axle cross tube for 911 and 930 models (1978-1988).
$989.14
Rear Axle Hex Nut, M12 x 1.5mm (50-79)
Part Number: 900.034.036.01
M12 x 1.5mm hex nut for rear axle on 356 (1950-1955), 356A (1955-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1977), 912 (1965-1969) and 924 (1976-1979) models.
$1.95
Rear Axle Joint Bolt Lock Plate (69-94)
Part Number: 911.332.191.00
Rear axle joint bolt lock plate for 911, 928, 930, 911 Turbo, and C2 models (1969-1994).
$11.25
Rear Axle Joint Bolt, 10x48mm, (69-12)
Part Number: 900.067.229.01
Rear axle joint bolt for 911, C2/C4, Carrera, 996, 997, Boxster and Cayman models. (1969-2012). Sixteen required. *Please note the Boxster and Cayman models only require twelve.
$2.26
Rear Axle Lock Nut, 911/912/930 (65-89)
Part Number: 900.084.013.02
Lock nut for rear axle fits 911, 912, and 930 models (1965-1989).
$1.60
Rear Axle Spacer Ring, 911/912/930 (65-77)
Part Number: 901.331.107.00
Spacer ring for rear axle on 911, 912 and 930 (1965-1977) models.
$11.12
Rear Axle Spring, 911/930 (72-89)
Part Number: 911.333.301.04
Spring for rear axle fits 911 and 930 models (1972-1974, 1983-1989).
$42.55
Rear Axle Strut, 911/930 (78-88)
Part Number: 911.333.009.00
Rear axle strut for 911 and 930 models (1978-1988). Two required.
$688.45
Rear Axle Trailing Arm, Left, 911/930 (78-88
Part Number: 930.331.511.05
Left rear axle trailing arm for 911 and 930 models (1978-1988).
$2,578.90
Rear Axle Trailing Arm, Right, 911/930 (78-88
Part Number: 930.331.512.05
Right rear axle trailing arm for 911 and 930 models (1978-1988).
$2,578.90
Rear Axle Washer, 911/930 (76-88)
Part Number: 999.025.046.01
Rear axle washer fits 911 and 930 models (1976-1988). Two required.
$8.15
Rear CV Joint Bolt (78-07)
Part Number: 900.067.211.09
Rear CV joint bolt for your 911 (starting in 1978) and Boxster.
$1.96
Rear Rubber Bump Stop, Bushing, for Shock Absorber
Part Number: 928.333.518.10
Rear Rubber Bump Stop, Bushing, for Shock Absorber for 911 (1990), 911 Carrera 4 (1989) and 928 (1978-1991, 1991-1995) models.
$10.43
Rear Spring Plate Bushing Set, 911/912/930 (68-89)
Part Number: 911.333.009.00.BHD
Rear spring plate bushing set for 911, 912 and 930 (1968-1989) models.
$33.49
Rear Sway Bar Bracket (65-77)
Part Number: 901.333.753.01
Rear sway bar bracket for 911, 912, 912E, 914-4, 914-6, and 930 models (1965-1977). Two required.
$16.08
Rear Sway Bar Bracket (76-98)
Part Number: 113.411.333
Rear sway bar bracket for 911, 924, 930, 911 Turbo, 944 and C2/C4 (1976-1998) models.
$10.75
Rear Sway Bar Bracket Bolt (8X18mm)
Part Number: N.010.239.30
Rear sway bar bracket bolt for 911, 912, 912E, 914-4, 914-6, 930 models (1965-1977). Four required.
$1.45
Rear Sway Bar Bracket, 911/930 (72-77)
Part Number: 911.501.180.00.GRV
Rear sway bar bracket fits 911 and 930 models (1972-1977). Two required.
$42.52
Rear Sway Bar Bracket, 911/930 (78-89)
Part Number: 911.501.983.00
Rear sway bar bracket fits 911 and 930 models (1978-1989).
$85.43
Rear Sway Bar Bushing (18mm), 911 (74-77)
Part Number: 911.333.793.02
Sway bar bushing for rear on 911 models. Four required.
$12.66
Rear Sway Bar Bushing (65-77)
Part Number: 901.343.782.00
Rear sway bar bushing for 911, 912E and 930 models (1965-1977).
$4.59
Rear Sway Bar Bushing, 18mm (78-98)
Part Number: 477.411.313.B
Rear stabilizer bushing for sway bar. Measures 18mm, two required.
$12.63
Rear Sway Bar Bushing, 20mm (85-94)
Part Number: 477.411.313.C
Rear sway bar bushing (20mm) for 911 (1985-1988), 924, 924S 944 (1988), 944S, C2 and C4 (1991-1994).
$10.75
Rear Sway Bar Bushing, 21mm, 911 (86-89)
Part Number: 477.411.313.M
Rear stabilizer bushing for sway bar on 911 models. Measures 21mm. Two required.This supersedes part number 477.3411.313.D
$12.63
Rear Sway Bar Link, Left, 911/930 (65-77)
Part Number: 901.333.731.01
Shackle for left rear sway bar fits 911 and 930 (1965-1977) models.
$49.30
Rear Sway Bar Link, Left, 911/930 (78-89)
Part Number: 930.333.071.00
Left rear stabilizer link for sway bar for 911 and 930 models (1978-1989).
Was: $58.90
Now: $39.14
On Sale
Rear Sway Bar Link, Right, 911/930 (78-89)
Part Number: 930.333.072.00
Right rear stabilizer link for sway bar for 911 and 930 models (1978-1989).
Was: $58.90
Now: $39.14
On Sale
Rear Sway Bar, 18mm, 911 (74-77)
Part Number: 911.333.701.01
Rear sway bar for 911 models.
$299.37
Rear Sway Bar, 18mm, 911 (78-85)
Part Number: 911.333.701.07
CURRENTLY UNAVAILABLE
$282.00
Rear Sway Bar, 18mm, 930 (1989)
Part Number: 930.333.701.28
Rear sway stabilizer bar fits 930 models (1989).
$309.77
Rear Sway Bar, 18mm, 930 (76-77)
Part Number: 930.333.701.00
No longer available
$133.04
Rear Sway Bar, 18mm, 930 (78-85)
Part Number: 930.333.701.23
CURRENTLY UNAVAILABLE
Rear sway stabilizer bar fits 930 models (1978-1985).
$209.09
Rear Sway Bar, 20mm, 930 (85-88)
Part Number: 930.333.701.25
Rear sway stabilizer bar fits 930 models (1985-1988).
$376.78
Rear Sway Bar, 22 mm, 911 (84-86)
Part Number: 911.333.701.10
Rear sway bar for 911 models.
$240.95
Rear Torsion Bar Cover Kit (65-86)
Part Number: 901.504.079.00
Cover kit for rear torsion bar fits 911, 912, 912E and 930 models.
$9.56
Rear Torsion Bar, Left, 24.1mm (78-85)
Part Number: 911.333.101.09
Left rear torsion bar for 911 and 930 models (1978-1985).
$376.95
Rear Torsion Bar, Left, 25mm (1986)
Part Number: 911.333.101.12
Left rear torsion bar fits 911 and 930 models (1986).
$298.97
Rear Torsion Bar, Left, 25mm (87-89)
Part Number: 911.333.115.00
Left rear torsion bar fits 911 and 930 models (1987-1989).
$298.99
Rear Torsion Bar, Left, 26mm (76-88)
Part Number: 911.333.101.03
Left rear torsion bar fits 930 models (1976-1985).
$335.03
Rear Torsion Bar, Right, 26mm (76-88)
Part Number: 911.333.102.03
Right rear torsion bar fits 911 and 930 models (1976-1988). Measures 26mm.
$418.58
Rear Torsion Cover Plate, 911/912/930
Part Number: 901.333.153.00
Cover plate for the rear torsion bar/spring plate on 911, 912 and 930 (1965-1989) models. Two required.
$72.95
Rear Torsion Spring Plate, 911/912/930 (65-77)
Part Number: 901.333.003.09
Rear axle strut for 911, 912 and 930 (1965-1977) models. Two required.
$662.90
Rear Torsion Spring Plate, 911/912/930 (69-77)
Part Number: SMC.333.003.01
Refurbished (used) original black rear axle strut with original bushings for 911, 912 and 930 models (1969-1977). Two required.
Was: $295.00
Now: $275.00
On Sale