Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 911/912 (65-73) > Engine & Fuel Systems > 912 Engine Block

356 Complete Turn Key Engine
Part Number: SMC.356.001
Complete 356 turn key Engine. Please call our Sales Department for details and abilivility.
$14,800.00
A16 Union, 911/912 (65-73)
Part Number: 900.136.013.02
A16 union for 911 and 912 (1965-1973) models.
$28.35
Accelerator Pump Gasket, All 356's/912 (50-69)
Part Number: 692.100.968.00
Accelerator pump gasket for all 356 (1950-1965) and 912 (1965-1969) models.
$1.30
Accelerator Pushrod, 911/91/930/912E/930 (65-89)
Part Number: 914.423.227.01
Accelerator pushrod for 911, 912, 912E and 930 models (1965-1989).
$24.32
ACE-356 Deep Oil Sump Cover Kit, All 356's/912 (50-69)
Part Number: SMC.101.001.02
Deep oil sump beautifully machined from aluminum for all 356 and 912 models. Helps to keep oil flowing to the bearings during hard cornering. Magnetic drain plug, seal and all necessary hardware included.
$595.00
ACE-356 Oil Return Tube Set, All 356's/912 (50-69)
Part Number: SMC.105.231.01
Solid push rod tube set for all 356's and 912's. Each set includes 8 tubes, 8 springs, 16 washers, and 16 seals.
$268.00
Air Cleaner Gasket, 911/912/914 (65-76)
Part Number: 901.108.215.02
Rubber air cleaner gasket for 911 (1965-1973), 912 (1965-1969), and 914 (1970-1976) models. This part supersedes 901.108.215.00.
$9.97
Air Cleaner Seal, 911/912 (65-68)
Part Number: 901.108.991.00
Air cleaner seal for 911 and 912 (1965-1968) models.
$40.85
Air Duct Funnel, 911/912 (65-69)
Part Number: 901.108.910.00
Air duct funnel for 911 and 912 (1965-1969) models.
$71.94
Air Filter Housing , 912 (68-69)
Part Number: 616.108.936.00
Rubber engine gasket for 912 models (1968-1969).
$25.95
Alternator Fan Housing, 911/930 (78-83)
Part Number: 930.106.006.00
CURRENTLY UNAVAILABLE

$699.00
Alternator Fan Housing, 911/930 (84-89)
Part Number: 930.106.006.07
All aluminum replacement alternator fan housing that is much more durable then it's predecessor. You can expect a direct fit with no modifications needed. On 1978-1979 911 SC models you will need to also replace the fan long discontinued from Porsche.
$949.00
Alternator Ground Strap, 911/912 (69-73)
Part Number: 901.612.110.00
Ground strap for alternator fits 911 and 912 models (1969-1973).
Was: $15.87
Now: $14.95
On Sale
Alternator Harness Grommet, 911/912/914 (65-76)
Part Number: 999.702.007.50
Alternator headrest grommet for 911 (1965-1973), 912 (1965-1969) and 914 (1970-1976) models.
$8.03
Alternator Nut, 911/930 (65-81)
Part Number: 901.603.905.00
Alternator nut for 911 and 930 models (1965-1981). 16 mm
$7.50
Banjo Bolt
Part Number: PCG.134.007.01
$9.15
Bearing Dowel Pin, All 356's/912 (Normal/Super)
Part Number: 539.01.110
Bearing dowel pin for all 356 and 912 models.
$7.21
Beveled Case Washer, All 356's/912 (50-69)
Part Number: 616.101.191.00
Beveled case washer for all 356's and 912 models (1950-1969).
$7.98
Bolt, 8mm x 45mm (50-89)
Part Number: 900.074.134.02
Intercooler bolt for all 356's, 911, 912, 930, 924 and 928 (1950-1989) models. Measures 8mm x 4mm.
$1.66
Bottom Flange Cover, All 356's/912 (50-69)
Part Number: 539.06.526
Bottom flange cover for 356, 356A, 356B, 356C, and 912 (1950-1969) models.
$19.14
Brass Gear Lock Ring, All 356's/912 (50-69)
Part Number: 901.102.148.00
Lock ring for distributor drive gear. 2.4mm. Fits all 356's (1950-1965), 911 (1965-1969), 912 (1965-1969), 912E (1965-1969) models.
$6.05
Breather Hose, 911 (65-92)
Part Number: 10.0607.020
Cloth covered breather hose for 911 (1965-1992) models. Sold by the meter.
$34.50
Bushing, 912 (Late)
Part Number: 616.107.541.00
Bushing for late 912 models.
$4.81
Cam Cover End Plug, 356/911/912 (50-69)
Part Number: 539.01.132
Cam cover end plug for 356 (1950-1965), 911 (1965-1969) and 912 (1965-1969) models.
$18.90
Cam Stud (BM8 X 65), 911/912 (65-83)
Part Number: 999.062.046.02
Currently unavailable
$3.98
Camshaft Gear (-3), All 356's/912 (50-69)
Part Number: 616.105.103.51
-3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$154.50
Camshaft Gear (-4), All 356's/912 (50-69)
Part Number: 616.105.103.71
-4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear (+1), All 356's/912 (50-69)
Part Number: 616.105.103.32
+1 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$593.30
Camshaft Gear (+3), All 356's/912 (50-69)
Part Number: 616.105.103.61
+3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$123.92
Camshaft Gear (+4), All 356's/912 (50-69)
Part Number: 616.105.103.81
+4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear Dowel Pin, 6x12mm
Part Number: N.013.199.1
Camshaft gear dowel pin for 356, 356A, 356B, 356C, 912 and 928 models (1950-1995). Three required for all 356 models. This item measures 6 x 12mm.
$0.77
Camshaft Gear, 356A/356B/356C/912 (56-69)
Part Number: SMC.105.103.02
Camshaft gear, size .001, fits 356A (1956-1959), 356B (1960-1963), 356C (1964-1965), and 912 (1965-1969).
$90.00
Camshaft Gear, 356A/356B/356C/912 (56-69)
Part Number: PCG.105.103.02
Camshaft gear, size 0, fits 356A (1956-1959), 356B (1960-1963), 356C (1964-1965), and 912 (1965-1969). This part supersedes part number 616.105.103.02.
$514.50
Camshaft, All 356's/912 (50-69)
Part Number: 616.105.105.00
Camshaft (w/out gear) fits all 356 and 912 models (1950-1969).
$563.26
Case Stud O-Ring (65-98)
Part Number: 999.701.006.40
It fits 911 (1965-1989, 1995-1998), 930 (1976-1989), 911 Turbo (1990-1994, 1996-1997), C2 (1989-1994) and C4 (1989-1998) models. Twenty-four required.
$0.51
Centerpiece Impeller, 8 Hole, 911/912 (65-77)
Part Number: SMC.106.010.03
Eight hole centerpiece impeller for engine cooling fans on 911 and 912 (1965-1977) models.
$260.50
On Sale
Check Valve Connection (65-95)
Part Number: 999.137.005.40
Check valve connection for 911, 924, 944, 968 and 928 (1965-1995) models.
$4.40
Circlip, All 356's/912 (50-69)
Part Number: 999.041.001.01
Circlip for all 356 (1950-1965) and 912 (1965-1969) models.
$0.89
Compressor Washer, 8.4mm, 911/924/928/944/964 (76-94)
Part Number: 900.223.001.02
Compressor washer for 911, 924, 928, 944 and 964 (1976-1994) models. Measures 8.4mm.
$0.69
Connecting Rod, all 356's/912
Part Number: 616.103.012.03
Currently unavailable
$738.25
Connecting Rod, Weight Group 20, 356/912 (50-69)
Part Number: 616.103.012.03.020
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 20: 514-523g.
$738.11
Copper Washer for Intermediate Piece, All 356's/912 (50-69)
Part Number: 369.01.111
Copper washer for the intermediate piece, but can be used in several parts of the car.
$4.00
Cover Plate Washer, All 356's/912 (50-69)
Part Number: 546.06.202
Cover plate washer for all 356 (1950-1966) (as needed) and 912 (1965-1969) models.
$5.13
Cover Plate, Below Pulley, 912
Part Number: 616.106.812.00
Cover plate below crankshaft pulley on all 912 models.
$89.99
Cover Plate, Left, 911/912 (65-69)
Part Number: 616.106.075.01
Cover plate for the left side of 911/912 (1965-1969) models.
$62.30
Crank Pulley Lock Washer, All 356's/912 (50-69)
Part Number: 539.02.111
Crank pulley washer for all 356 and 912 models (1950-1969).
$4.81
Crank Pulley, Sealing Washer, All 356's/912 (50-69)
Part Number: 616.102.163.01
Optional oil slinger ring, for early engines.
$10.45
Crankcase Assembly Seal Ring, 911/912 (65-69)
Part Number: 901.107.591.00
Crankcase assembly seal ring for 911 and 912 (1965-1969) models.
$6.02
Crankcase Gasket, 356C/912 (64-69)
Part Number: 616.101.391.00
Gasket for the front of the engine case. It fits 356C (1964-1965) and 912 (1965-1969) models.
$14.74
Crankshaft Bearing Shell I, 911/912/914 (65-76)
Part Number: 901.101.131.00
Crankshaft bearing shell I for 911 (1965-1977), 912 (1965-1969) and 914 (1970-1976) models. Two required.
$59.74
Crankshaft Bearing Shell II-VII, 911/912/914 (65-76)
Part Number: 901.101.132.00
Crankshaft bearing shell II -VII for 911, 912 and 914 models (1965-1977).
$35.88
Crankshaft Gear, All 356's/912 (50-69)
Part Number: 539.02.105
Steel crankshaft gear for 356, 356A, 356B, 356C and 912 models (1950-1969).
$382.00
Crankshaft Main Bearing Set, .25mm, 356C/912
Part Number: 616.100.138.60.A
Alloy main bearing set for crankshaft for 356C and 912 models (1965-1969). Inside standard, outside .25mm.
Was: $481.12
Now: $384.89
On Sale
Crankshaft Main Bearing Set, .25mm, 356C/912
Part Number: 616.100.138.50.A
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .25mm, outside standard.
$545.00
Crankshaft Main Bearing Set, .25mm/.25mm, 356C/912
Part Number: 616.100.138.70.A
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .25mm, outside .25mm.
$447.51
Crankshaft Main Bearing Set, .25mm/.25mm/+1mm Thrust, 356C/912
Part Number: 616.100.138.70.AO1
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .25mm, outside .25mm and +1mm thrust.
$445.91
Crankshaft Main Bearing Set, .25mm/+1mm Thrust, 356C/912
Part Number: 616.100.138.60.AO1
Alloy main bearing set for crankshaft for 356C and 912 models (1965-1969). Inside standard, outside .25mm and +1mm thrust.
$445.91
Crankshaft Main Bearing Set, .50mm, 356C/912
Part Number: 616.100.138.55.A
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .50mm, outside standard.
$515.00
Crankshaft Main Bearing Set, .50mm/.25mm, 356C/912
Part Number: 616.100.138.75.A
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .50mm, outside .25mm.
Was: $444.15
Now: $399.75
On Sale
Crankshaft Main Bearing Set, .50mm/.25mm, All 356's/912 (50-69)
Part Number: 616.100.138.95.A
Main bearing set for crankshaft for 356, 356A,356B, 356C and 912 models (1950-1969). Fits 0.50mm case, 0.25mm crank.
$445.91
Crankshaft Main Bearing Set, .50mm/.25mm/+1mm Thrust, all 356's/912 (50-69)
Part Number: 616.100.138.95.AO1
Main bearing set for crankshaft for 356, 356A,356B, 356C and 912 models (1950-1969). Fits 0.50mm case, 0.25mm crank and +1mm thrust.
$448.95
Crankshaft Main Bearing Set, .50mm/.50mm, All 356's/912 (50-69)
Part Number: 616.100.138.100.A
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits .50mm case and .50mm crank.
$445.91
Crankshaft Main Bearing Set, .50mm/Thrust +1mm, All 356's/912 (50-69)
Part Number: 616.100.138.90.AO1
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits 0.50 mm case, standard crank and +1mm thrust.
$489.94
Crankshaft Main Bearing Set, 356C/356SC/912 (64-69)
Part Number: 616.100.138.00
Standard alloy main bearing set for crankshaft for 356C, 356SC and 912 models.
$400.00
Crankshaft Main Bearing Set, STD/.50mm, All 356C's/912
Part Number: 616.100.138.90.A
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside standard length, outside .50mm.
$445.91
Crankshaft Seal Tool
Part Number: 10.0536.011
Crankshaft seal tool, crankshaft mount portion.
$409.20
Crankshaft Seal Tool, Complete
Part Number: 10.0536.012
Complete crankshaft seal tool.
$722.11
Crankshaft Seal Tool, Mount Portion
Part Number: 10.0536.013
Crankshaft seal tool - mount portion.
$359.89
Crankshaft Timing Gear (50-76)
Part Number: 111.105.223
Aftermarket crankshaft timing gear for 356 Pre-A, 356A, 356B, 356C, 911, 912, 914-4 and 912E models.
$97.50
Crankshaft Timing Gear Key (50-76)
Part Number: 111.105.213
Crankshaft timing gear key fits all 356, 912, 912E, 914, and 914-4 (1950-1976) models.
$5.53
Crankshaft, 356SC/912 (64-69)
Part Number: 616.102.015.01
Crankshaft. Fits 356 SC and 912 models.
$1,335.00
Crankshaft, 4340 Chromoly Billet, All 356's/912 (50-69)
Part Number: SMC.102.015.02
Currently unavailable
$1,649.95
Crankshaft, 4340 Chromoly Forged, all 356's/912 (50-69)
Part Number: SMC.102.015.01
CURRENTLY UNAVAILABLE

$1,209.95
Cylinder Head Temperature Sensor, 912E/914 (70-76)
Part Number: 311.906.041A
Cylinder head temperature sensor for 912E and 914 (1970-1976) models.
$14.50
Distributor Drive Shaft, All 356's/912 (50-69)
Part Number: 539.09.101
Distributor drive shaft for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$201.00
Engine & Transmission Mount, 912 (65-69)
Part Number: 902.305.492.00
Mount for engine and transmission on 912 models.
$80.12
Engine Block Gasket Set, All 356's/912
Part Number: 616.101.901.01
Engine block gasket set for all 356 and 912 models (1950-1969).
$77.84
Engine Case Holder
Part Number: SMC.013.00
Engine case holder for all Porsche engines. Fits any standard roll away stand. It has three holes, but a fourth hole may be needed in order to fit a universal stand.
$103.24
Engine Case Stud, All 356's/912 (50-69)
Part Number: 539.01.118
Engine case stud for all 356 (1950-1965) and 912 (1965-1969) models. Sixteen needed.
$25.75
Engine Case Tie Bolt, 356A/356B/356C/912 (57-69)
Part Number: 616.101.171.00
Hexagon head bolt for tensioning engine crankcase for 356A, 356B, 356C and 912 models (1957-1969). One needed.
$11.40
Engine Case Washer, All 356's/912 (65-69)
Part Number: 043.101.129
Engine case washer for all 356 and 912 models (1950-1969).
$1.01
Engine Compartment Seal, 911/912 (65-73)
Part Number: 911.504.930.00
Engine compartment seal for 911 and 912 (1965-1973) models.
$22.95
Engine Cooling Fan, 911/930 (74-89)
Part Number: 930.106.012.55
Replace your old or worn 11 blade alternator fan with this EPS replacement. A worn fan can cause premature damage to the alternator.
$417.55
Engine Cover Plate, Left, All 356's/912 (50-69)
Part Number: 539.06.638
Left side cover plate at the flywheel end of the engine for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$56.60