Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 911/912 (65-73) > Engine & Fuel Systems > 911 Engine Block

A16 Union, 911/912 (65-73)
Part Number: 900.136.013.02
A16 union for 911 and 912 models (1965-1973).
$28.35
Accelerator Pull Rod Extension, 911 (65-86)
Part Number: 901.423.223.01
Accelerator pull rod extension for 911 models (1965-1986).
$4.33
Accelerator Pull Rod, 911 (72-73)
Part Number: PCG.423.016.00
1972-1973 (Except CIS Injection).
$93.56
Accelerator Pull Rod, 911 (73-83)
Part Number: 911.423.043.00
Accelerator pull rod for 911 models with CIS fuel injection (1973-1983).
$97.94
Accelerator Pushrod, 911/91/930/912E/930 (65-89)
Part Number: 914.423.227.01
Accelerator pushrod for 911, 912, 912E and 930 models (1965-1989).
$23.32
Accelerator Rod, 911/930 (65-89)
Part Number: PCG.423.024.00
Accelerator rods for 911 and 930 models (1965-1989).
$89.36
Actuating Lever, 911 (72-77)
Part Number: 911.110.073.00
Actuating lever for throttle valves on injection system. Fits 911 (1972-1977) models with mechanical injection.
$365.00
Adjusting Screw, 911 (70-73)
Part Number: 911.100.933.00
Engine adjusting screw for 911 models Six required. Use with compression spring, #911.100.934.00.
$6.36
Air Cleaner Gasket, 911/912/914 (65-76)
Part Number: 901.108.215.02
Rubber air cleaner gasket for 911 (1965-1973), 912 (1965-1969) and 914 (1970-1976) models. This part supersedes 901.108.215.00.
$9.97
Air Cleaner Seal, 911/912 (65-68)
Part Number: 901.108.991.00
Air cleaner seal for 911 and 912 (1965-1968) models.
$40.85
Air Duct Funnel, 911/912 (65-69)
Part Number: 901.108.910.00
Air duct funnel for 911 and 912 (1965-1969) models.
$71.94
Alternator Fan Housing, 911/930 (78-83)
Part Number: 930.106.006.00
CURRENTLY UNAVAILABLE

$699.00
Alternator Fan Housing, 911/930 (84-89)
Part Number: 930.106.006.07
All aluminum replacement alternator fan housing that is much more durable then it's predecessor. You can expect a direct fit with no modifications needed. On 1978-1979 911 SC models you will need to also replace the fan long discontinued from Porsche.
$949.00
Alternator Ground Strap, 911/912 (69-73)
Part Number: 901.612.110.00
Ground strap for alternator fits 911 and 912 models (1969-1973).
Was: $15.87
Now: $14.95
On Sale
Alternator Nut, 911/930 (65-81)
Part Number: 901.603.905.00
Alternator nut for 911 and 930 models (1965-1981). 16 mm
$7.50
Alternator Pulley, Outer, 911/914 (64-74)
Part Number: 901.603.421.01
Outer half alternator pulley for 911, 914-4, and 914-6 models (1965-1974).
$23.40
Alternator V Belt (65-89)
Part Number: 999.192.176.50
Alternator V belt for 911, 914-6 and 930 models (1965-1989). Note: Continental option is toothed.
$12.05
Alternator V Belt, 912E/914 (70-76)
Part Number: 068.903.137.D
Alternator V belt for 912E and 914-4 models (10mm x 965mm).
$14.12
Alternator, 911 (78-83)
Part Number: 911.603.120.DX
Alternator for 911 (1978-1983) models.
$929.23
Alternator, 911/914 (65-74)
Part Number: 911.603.120.06
14V, 50 amp alternator for 911 and 914/6 models. This replacement version may required modifications.
$534.16
Aluminum Seal Ring, 12mm x 18mm (70-89)
Part Number: 900.123.101.30
Aluminum seal ring for 911 and 928 (1970-1989) models. Measures 12mm x 18mm.
$0.46
Aluminum Seal Ring, 911/930 (70-89)
Part Number: 900.123.075.30
Aluminum seal ring for 911 and 930 (1970-1989) models.
$2.90
Banjo Bolt
Part Number: PCG.134.007.01
$9.15
Banjo Bolt, 911/924/928/944 (70-91)
Part Number: 911.110.899.00
Banjo bolt for 911, 924, 928 and 944 models (1970-1991). Six required.
$20.85
Banjo Bolt, 911/930/924/944 (65-89)
Part Number: 900.134.006.02
Banjo bolt for 911 (1965-1989), 930 (1975-1977), 924 (1986-1988) and 944 (1982-1985) models.
$6.35
Bearing Half Shell, I, 911/912 (65-77)
Part Number: 901.101.131.50
Bearing half shell I for 911 and 912 models (1965-1977). Two required.
$64.82
Bearing Half Shell, II-VII, 911/912 (65-77)
Part Number: 901.101.132.50
Bearing half shells II through VII for 911 and 912 models (1965-1977). Twelve required.
$32.26
Bell Crank/Throttle Linkage, 356A/356B/356C/911 (58-69)
Part Number: 616.08.011
Bell crank/throttle linkage for 356A (1958-1959), 356B (1960-1963). 356C (1964-1965) and early 911 (1965-1969) models.
$360.66
Bolt, 8mm x 45mm
Part Number: 900.074.134.02
Intercooler bolt for all 356's, 911, 912, 930, 924 and 928 (1950-1989) models.
$1.66
Bracket, 911/912E/930/914 (65-89)
Part Number: 999.511.076.02
Bracket for 911, 912E, 930 and 914 (1965-1989) models.
$6.49
Cam Cover End Plug, 356/911/912 (50-69)
Part Number: 539.01.132
Cam cover end plug.
$18.90
Cam Stud (BM8 X 65), 911/912 (65-83)
Part Number: 999.062.046.02
Currently unavailable
$3.98
Camshaft Chain Rail Bolt, 911/914-6 (65-89)
Part Number: 901.105.226.03
Bolt to support the camshaft chain rails on 911 and 914-6 models (1965-1989).
$21.49
Camshaft Cover Flange (65-89)
Part Number: 930.105.196.00
Camshaft cover flange for 911, 912, 914/6 and 930 models.
$44.16
Camshaft Drive Flange Gasket (65-98)
Part Number: 930.105.197.05
Camshaft drive flange gasket for 911, 930, C2, and C4 models (1965-1998). Two required.
$3.78
Camshaft Drive Gear Dowel Pin (65-98)
Part Number: 900.243.001.00
Camshaft drive gear dowel pin for 911, 930, 911 Turbo, C2 and C4 models (1965-1998).
$1.95
Camshaft End Play Shim (65-98)
Part Number: 901.105.561.00
Camshaft end play shim for 911, 930, C2, and C4 (1965-1998).
$3.28
Camshaft Gear Dowel Pin, 6x12mm
Part Number: N.013.199.1
Camshaft gear dowel pin for 356, 356A, 356B, 356C, 912 and 928 models (1950-1995). Three required for all 356 models. This item measures 6 x 12mm.
$0.77
Camshaft Housing Barrel Nut (65-94)
Part Number: 901.111.271.00
Camshaft housing barrel nut for 911, 930, 911 Turbo, C2 and C4 models (1965-1994).
$1.28
Camshaft Nut (65-89)
Part Number: 901.105.172.00
Camshaft nut for 1965-1989 models.
$54.25
Camshaft O-Ring, 911/930 (65-92)
Part Number: 999.701.468.40
Camshaft o-ring for 911 and 930 models (1989-1992).
$15.58
Camshaft Seal, 911 (70-73)
Part Number: 999.113.068.50
Camshaft seal for 911 models with mechanical injection.
$5.30
Camshaft Thrust Washer (65-98)
Part Number: 901.105.562.00
Camshaft thrust washer for 911, 930, 911 Turbo, C2 and C4 models (1965-1998).
$15.35
Camshaft Timing Gear (65-89)
Part Number: 901.105.546.02
Camshaft timing gear for 911 (1965-1989).
$93.39
Camshaft Timing Gear Flange (65-98)
Part Number: 901.105.583.01
Camshaft timing gear flange for 911, 914-6, 930, C2, and C4 (1965-1998).
$96.41
Camshaft, 911
Part Number: 901.105.109.05
911 camshaft.
$712.67
Camshaft, 911
Part Number: 901.105.109.06
911 camshaft.
$961.51
Camshaft, 911
Part Number: 901.105.109.04
911 camshaft.
$1,098.41
Camshaft, 911 (73+)
Part Number: 911.105.141.00
$1,085.41
Camshaft, 911 w/MFI (69-73)
Part Number: 901.105.183.02
911 camshaft.
$935.25
Camshaft, 911E
Part Number: 901.105.181.03
911E camshaft.
$895.41
Camshaft, 911E/911T (72-73)
Part Number: 901.105.181.00
Camshaft for 911E and 911T (1972-1973) models.
$1,101.04
Camshaft, 911S (67-68)
Part Number: 901.105.168.02
$935.25
Camshaft, 911T
Part Number: 901.105.133.02
911T camshaft.
$935.41
Camshaft, Left, 911S (70-72)
Part Number: 901.105.183.01
Left camshaft for 911S models with a 2.7L engine and a fuel injection system.
$912.54
Camshaft, Right, 911S (70-72)
Part Number: 901.105.168.01
Right camshaft for 911S models with a 2.7L engine and a fuel injection system.
$912.54
Carburetor Hose Cap, 356/911/912/914 (50-76)
Part Number: 901.108.219.00
Carburetor hose cap for all 356 (1950-1965), 911/912 (1965-1969) and 914 (1970-1976) models.
$13.26
Carburetor to Manifold Insulator Spacer, Solex 40PII-4
Part Number: 616.108.390.00
Carburetor to manifold insulator spacer for Solex 40PII-4. Four required.
$10.80
Case Nut (50-77)
Part Number: 999.070.004.02
Case nut for all 356, 911 and 912 models. Thirteen required.
$6.95
Case Stud O-Ring (65-98)
Part Number: 999.701.006.40
It fits 911 (1965-1989, 1995-1998), 930 (1976-1989), 911 Turbo (1990-1994, 1996-1997), C2 (1989-1994) and C4 (1989-1998) models. Twenty-four required.
$0.51
Chain Tensioner Rebuild Kit, 911/930/914 (65-83)
Part Number: 911.105.901.01
Repair kit for "049" & "053" tensioners. Fits 911, 930 and 914 (1965-1983) models. One needed per tensioner.
$41.76
Chain Tensioner Shaft Sprocket , 911/930/911 Turbo (65-92)
Part Number: 901.105.056.01
Shaft for timing chain idler gear fits 911, 930, and 911 Turbo models (1965-1992).
$54.04
Chain Wheel Support, Left, 911/914-6 (65-79)
Part Number: 901.105.505.02
Camshaft chain wheel support for the left side on 911 and 914-6 models (1965-1979).
$255.60
Chain Wheel Support, Right, 911/914-6 (65-79)
Part Number: 901.105.506.02
Camshaft chain wheel support for the left side on 911 and 914-6 models (1965-1979).
$255.60
Check Valve Connection (65-95)
Part Number: 999.137.005.40
Check valve connection for 911, 924, 944, 968 and 928 (1965-1995) models.
$4.40
Circlip Injector, 22mm
Part Number: SR072
Install your wrist pin circlips into your piston with ease. Made from machined steel these injectors slip in with ease.
$92.00
Complete Engine Gasket Set, 911 (2.0 MFI)
Part Number: 901.100.902.04
Complete engine gasket set for 911 models with 2.0L MFI engines.
$308.12
Complete Engine Gasket Set, 911 (2.2L)
Part Number: 911.160.903.00
Complete engine gasket set for 911 models with 2.2L engines and Zenith carburetors.
$265.00
Complete Engine Gasket Set, 911 (2.4 MFI)
Part Number: 911.100.905.00
Complete engine gasket set for 2.4 engines.
$218.74
Complete Engine Gasket Set, 911/914 (2.0L)
Part Number: 901.100.902.01
Engine gasket set for 911 (1965-1969) and 914-6 (1970-1972) models.
$374.41
Complete Engine Gasket Set, 911/914 (2.0L)
Part Number: SMC.100.902.01
Engine gasket set for 911 (1965-1969) and 914-6 (1970-1972) models.
$383.92
Complete Rod Bearing Set, 911/914 (65-72)
Part Number: 901.103.141.50
Complete rod bearing set for 911 (1965-1973) and 914 (1970-1972) models with 2.0 engines. One set needed per car. Measures .25mm.
$270.00
Compression Spring, 911 (70-73)
Part Number: 911.100.934.00
Engine compression spring for 911 models. Use with adjusting screw #911.100.933.00.
$7.92
Compressor Washer, 8.4mm, 911/924/928/944/964 (76-94)
Part Number: 900.223.001.02
Compressor washer for 911, 924, 928, 944 and 964 (1976-1994) models. Measures 8.4mm.
$0.69
Connecting Rod Bolt, 911 (70-71)
Part Number: 901.103.171.00
Connecting rod bolt for 911 models (1970-1971).
$16.30
Connecting Rod Bolt, 911/914/914-6 (65-72)
Part Number: 901.103.172.00
Connecting rod bolt for 911, 914 and 914-6 models. Twelve required.
$13.50
Connecting Rod Bolt, 911/930 (72-83)
Part Number: 914.103.171.00
Connecting rod bolt for 911 and 930 models (1972-1983).
$12.96
Connecting Rod, Weight Group 14, 356/912 (50-69)
Part Number: 616.103.012.030.14
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 17: 505-514g.
$738.11
Connecting Rod, Weight Group 17, 356/912 (50-69)
Part Number: 616.103.012.030.17
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 14: 496-505g.
$738.11
Copper Washer, 12 x 16 x 1.5 mm
Part Number: 900.123.005.00
Copper Washer, 12 x 16 x 1.5 mm, for 911 (1965-1988), 911 Carrera (1989), 911 Speedster (1989), 911 Turbo (1989, 1991), 914 2.0L H6 (1972), 914-6 (1970-1971) and 930 (1978-1979) models.
$0.07
Cover Plate, Left, 911/912 (65-69)
Part Number: 616.106.075.01
Cover plate for the left side of 911/912 (1965-1969) models.
$62.30
Crank Pulley Bolt, All 356's/912 (50-69)
Part Number: 539.02.112
Crank pulley bolt for all 356 (1950-1965) and 912 (1965-1969) models.
$47.05
Crankcase Assembly Seal Ring, 911/912 (65-69)
Part Number: 901.107.591.00
Crankcase assembly seal ring for 911 and 912 models (1965-1969).
$6.02
Crankcase Stud, 911/930 (74-89)
Part Number: 999.061.056.02
10mm x 15mm. One required.
$2.98