Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356C (64-65) > Engine & Fuel Systems > Fuel & Carburetor

40 IDF Weber Carburetor
Part Number: SMC.189.501.38
40 IDF Weber Carburetor.
$407.75
Accelerator Pump Kit, Solex 40PII-4, 356/912 (50-69)
Part Number: 616.100.356.40
Solex 40PII-4 accelerator pump kit.
$0.00
Accelerator Pump Volume Vial
Part Number: 000.721.025.10
This vial adjusts the pump volume discharge and helps assure smooth acceleration. May not fit early 356 carburetors.
$79.55
Air Filter, All 356's (Zenith 32 NDIX Carburetors)
Part Number: 616.08.811.1
Mahle air filter for 356, 356A, 356B and 356C models. Two required.
$15.38
Ball Pin For Linkage, Zenith 32NDIX/Solex 40 PII-4
Part Number: SMC.167.022.02
Ball pin to repair bell cranks, crossbars or any linkage part that takes an 8mm ball pin.
$9.25
Ball Socket Set (LH Threaded)
Part Number: SMC.169.LH.SET
Four (4) JORG brand ball sockets with snap ring for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963) and 356C (1964-1965) models.
Was: $24.51
Now: $19.99
On Sale
Ball Socket Set (RH Threaded)
Part Number: SMC.169.RH.SET
Four (4) ball sockets with snap ring for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1977) and 912 (1965-1969) models.
Was: $24.51
Now: $19.99
On Sale
Ball Socket, All 356/911/912
Part Number: 999.169.002.02
Four needed for the fresh air vent on 356B and 356C models. For needed for the throttle body for 911/912/930 models.
$8.98
Ball Socket, LH Threaded, All 356's (50-65)
Part Number: 900.169.008.02
Two needed for the linkage on 356 models.
$7.68
Ball Socket, LH Threaded, All 356's (50-65)
Part Number: 900.169.010.02
5mm left hand threaded ball socket, 8mm ball, fits all 356 models (1950-1965).
$8.50
Ball Socket, RH Threaded, All 356's (50-65)
Part Number: 900.169.013.02
Two needed.
$7.86
Ball Socket, RH Threaded, All 356's/911/912 (50-77)
Part Number: 900.169.001.02
Ball socket for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1977) and 912 (1965-1969) models.
$7.87
Banjo Hollow Hexagon Bolt (Solex 40P11)
Part Number: 616.100.867.00
Fuel line banjo bolt for Zenith carburetors. Two required.
$22.18
Base Gasket
Part Number: 616.108.291.00
Wire mesh filter base gasket for Solex 40PII-4 carburetors, Super 90, SC, and 912 models. Two required.
$13.12
Bell Crank Bushing, (50-89)
Part Number: 914.423.211.00
Accelerator bell crank bushing for all 356's, 911, 912, 914 and 930 models (1950-1989). Two required.
$2.31
Bell Crank Repair Kit, 356B/356C/911/912 (60-69)
Part Number: NLA.423.020.3M
Bell Crank repair kit for 356B, 356C, 911 and 912 models.
$16.92
Bell Crank, Rear Of Fan Housing
Part Number: 616.108.071.00
Bell crank, rear of fan housing. Fits Zenith 32NDIX & Solex 40PII-4.
$81.89
Braided Fuel Hose, Bulk (7mm)
Part Number: 644.180.001.00
Braided hose for fuel and oil. Sold by the meter.
$8.91
Braided Hose, Bulk (9mm)
Part Number: N.020.359.1
Braided hose for oil or fuel. Pressure-215 PSI Test Pressure- 430 PSI Burst Pressure-850 PSI. Sold by the meter.
$12.95
Buffer Block, Solex 40PII-4
Part Number: 692.100.993.01
Buffer block for 356, 356A, 356B, 356C and 912 (1950-1969) models with split shaft carburetors. Fits Solex 40PII-4. Two needed per car.
$4.95
Carburetor Clip and Bracket Set, All 356's (50-65)
Part Number: SMC.616.100.00
Carburetor clip and bracket set for all 356 (1950-1965) models.
$75.00
Carburetor Gasket, All 356's/912 (50-69)
Part Number: 616.100.968.00
Carburetor gasket for all 356 (1950-1965) and 912 (1965-1969) models.
$5.50
Carburetor Kit, 356A/B/C (55-65)
Part Number: ZE-25K
Carburetor kit fot 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$72.13
Carburetor Kit, Solex 32 PBIC
Part Number: 900.070.19.00
Gasket kit for Solex 32 PBIC carburetors on all 356 models. Two required.
Was: $22.49
Now: $20.50
On Sale
Carburetor Kit, Solex 40PII-4
Part Number: 616.108.902.03
Solex 40PII rebuild gasket kit for all 356's and 912 models (1950-1969) with a divided throttle. Fits Solex 40PII-4 with split shaft.
$47.25
Carburetor Kit, Solex 40PJCB
Part Number: 616.08.902
Gasket kit for Solex 40PJCB carburetors on all 356 models.
$35.17
Carburetor Kit, Weber, All 356's/912 (50-69)
Part Number: SMC.100.949.00
The ultimate Weber rebuild kit for all 356 and 912 models (1950-1969).
$54.26
Carburetor Kit, Zenith 32 NDIX
Part Number: 616.108.902.01
Zenith 32 NDIX carburetor kit for all 356 (1956-1965) models with accelerator pump plunger included.
$45.85
Carburetor Kit, Zenith 32 NDIX
Part Number: 616.108.902.00
Zenith 32 NDIX carburetor kit for 356A(T-2), 356B and 356C models- accelerator pump plunger not included. You will need one per carburetor.
$52.30
Carburetor Linkage Push Rod (60-69)
Part Number: 616.108.620.00
Push rod for bell crank/throttle linkage with right hand thread for 356B (1960-1963), 356C (1964-1965), 911 (1965-1969) and 912 (1965-1969) models. One required.
$13.85
Carburetor Lock, Zenith 32 NDIX (55-65)
Part Number: 616.100.812.00
Carburetor lock used on Zenith 32 NDIX carburetor pump control linkage for 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$9.64
Carburetor Pressure Push Rod, All 356's/911/912 (50-69)
Part Number: 616.08.012
Carburetor pressure push rod for linkage on 356 (1950-1955), 356A (1955-1959), 356B (1960-1963) 356C (1964-1965) 911 (1965-1969) and 912 (1965-1969) models. Has right hand thread on the top and left hand thread on the bottom. Fits Zenith 32NDIX & Solex 40PII-4, two required.
$13.95
Carburetor Return Spring, All 356's/912 (Solex)
Part Number: 999.522.003.02
Carburetor return spring for Solex 40PII-4. It fits all 356's and 912 (1950-1969).
$4.55
Carburetor Return Spring, All 356's/912 (Zenith)
Part Number: 616.08.119
Carburetor return spring for Zenith 32NDIX Carburetors. Two required.
$3.95
Carburetor Spring, All 356's (50-65)
Part Number: 616.100.810.00
Carburetor spring for all 356 (1950-1965) models. Four needed per car.
$1.45
Carburetor Stud (Weber IDA)
Part Number: SMC.000.002.12
Weber IDA carburetor stud.
$3.25
Carburetor to Manifold Gasket
Part Number: 616.108.901.02
Carburetor to manifold gasket for Solex 40PII-4. Eight required.
$1.78
Carburetor to Manifold Gasket, all 356's (50-65)
Part Number: 597.108.310.02
Caburetor to manifold gasket for 356, 356A, 356B and 356C models (1950-1965). This item fits Zenith 32NDIX carburetors. Two required.
$7.81
Carburetor Washer, All 356's/912 (50-69)
Part Number: 616.108.423.00
Carburetor washer for all 356's and early 912 models.
$0.90
Circlip, All 356's/912 (50-69)
Part Number: 999.041.001.01
Circlip for all 356 (1950-1965) and 912 (1965-1969) models.
$0.89
Cover Plate Bolt O-Ring, Zenith 32 NDIX
Part Number: 616.100.840.00
O-ring for the bolt to the cover plate on Zenith 32 NDIX carburetors,
$0.41
Dowel Pin, 8mm x 10mm
Part Number: 900.197.010.00
Dowel pin for shifters for all models.
$0.88
Electric Fuel Pump, 12 Volt, All 356/912 (50-69)
Part Number: 616.108.005.01
Electric 12 volt fuel pump for all 356's (1950-1969) and 912 (1965-1969) models.
$53.99
Flapper Box Repair Set (Double)
Part Number: 616.106.002.00
Double flapper box repair set.
$7.65
Flapper Box Repair Set (Single)
Part Number: 616.106.001.00
Single flapper box repair set.
$13.25
Float Pivot Arm (Weber IDA)
Part Number: SMC.000.002.10
Weber IDA float pivot arm.
$9.25
Fuel Feed Line, 356B/356C (60-65)
Part Number: 616.108.559.00
Feed line from body to fuel pump for 356B (1960-1963) models with late fuel pump and 356C (1964-1965) models.
$48.86
Fuel Line Grommet, 356B/356C (60-65)
Part Number: 539.06.605
Grommet for fuel line on 356B and 356C (1960-1965) models. Two required.
$2.15
Fuel Line, 356B/356C
Part Number: 616.108.059.00
Pump to carburetor fuel line. It fits 356B (w/late fuel pump) and 356C models.
$265.00
Fuel Pre-Pump, 356/912/911
Part Number: SMC.000.916
Fuel pre-pump for all models. It is designed to work as a pre-pump in 6 Volt systems or as a pump with higher fuel flow in 12 Volt systems. This pump is used to work in addition to your existing mechanical fuel pump.
$159.95
Fuel Pump Bottom Plate, All 356's
Part Number: 616.106.831.00
Plate under fuel pump for all 356 models.
$22.54
Fuel Pump Flange, 356B/356C/912 (60-69)
Part Number: 616.108.441.00
Fuel pump block, fiber spacer. Fits 356B (with late pump), 356C (1964-1965), and 912 (1965-1969).
$35.23
Fuel Pump O-Ring, All 356's/912
Part Number: 999.701.043.50
This is the O-ring that goes on the bottom of the fuel pump and the fiber isolation block.
$5.50
Fuel Pump Rebuild Kit, 356B(T6)/356C/912 (62-69)
Part Number: 644.108.903.01
Fits "Late" style fuel pumps. Fits 356B(T6), 356C and 912 models.
$35.15
Fuel Pump Screw Set, All 356's (50-65)
Part Number: NLA.108.100.00
Machine screw set for fuel pump fits all 356 models (1950-1965).
$11.25
Fuel Pump, 356/912 (55-69)
Part Number: PCG.108.401.00
Fuel pump for 356A (1955-1959), 356B (1960-1963), 356C (1964-1965) and 912 (1965-1969) models.
$429.05
Hose Clamp (9.5mm-12mm)
Part Number: 999.512.055.02
Hose clamp with a 9.5mm-12mm range.
$2.15
K&N Solex 40PII-4 Air Cleaner, All 356's/912
Part Number: 100.5
The K&N FilterCharger® air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life.
$156.88
K&N Weber 40IDF Air Cleaner, All 356's/912
Part Number: 100.6
The K&N FilterCharger® air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life.
$98.66
Manifold to Head Gasket, Solex 40PII-4
Part Number: 616.108.905.00
Manifold base to head gasket. Two required per engine.
$3.71
Mechanical Fuel Pump, 356B/356C/912
Part Number: 616.108.401.X2
This is the late version fuel pump. To receive a refund for the core deposit, please send your original fuel pump within 90 days of your purchase.
$357.25
Needle Valve Plug (Weber IDA)
Part Number: SMC.000.002.11
Weber IDA needle valve plug.
$9.25
Oil Line Banjo Bolt, 356B(T6)/356C/912 (63-69)
Part Number: 616.07.812
Threaded banjo bolt for engine oil line for 356B(T6), 356C and 912 (1963-1969) models.
$15.00
Oil Line, 356/912 (56-69)
Part Number: PCG.07.826
Oil line from the bottom of the oil filter housing to the engine. Fits 356A (1956-1960), 356B (1960-1963), 356C (1964-1965) and 912 (1965-1969) models.
$23.88
Oil Pressure Kit, All 356's/Spyder (50-65)
Part Number: 547.07.113S
Oil pressure kit - 547-692/0. CNC machined, zinc plated and stainless steel piston. Complete with correct spring. For 356 Carrera 1500/1600 engines and 550 Spyder models.
$62.55
Operating Shaft With Flaps, All 356's (50-65)
Part Number: 546.06.065
Operating shaft with flaps for all 356 (1950-1965) models.
$276.91
Pierburg Fuel Pump Diaphragm, 356B/356C/912
Part Number: 5354
Pierburg fuel pump diaphragm that is an exact reproduction and perfect for concours shows!
$64.95
Pivot Ball For Cross Shaft, Linkage
Part Number: 999.167.012.02
Pivot ball for cross shaft, 2 req'd. Fits Zenith 32NDIX & Solex 40PII-4.
$16.50
Shaft Repair Kit, All 356's (50-65)
Part Number: 546.06.066
Operating shaft repair kit for all 356 (1950-1965) models.
$15.19
Solex 40 P11-4 Air Cleaner, Super 90/SC/912
Part Number: 616.108.203.01
Air filter for all Solex 40 and 44 carburetors for Porsche 356 Super 90, 356SC, 912 and 356 Carrera models.
$475.05
Solex 40 Velocity Stack Set
Part Number: NLA.108.203.11
Racing velocity stack set(2) for all models with Solex 40 carburetors. Add power to your Porsche with these stacks. 60mm Tall, each flare measures 65mm at widest point with 25mm distance between each flare. Hardware is included. Please choose silver or red color.
$247.00
Solex EIS/Kadron Mesh Air Cleaner
Part Number: CA-004D
This mesh air filter cleaner is a perfect fit for the single barrel Zenith carburetors and is a direct replacement for the Solex 40/44 EIS series for all 356's models. Cleaner has one 2 5/8" opening.
Was: $127.92
Now: $99.50
On Sale
Solex Mesh Air Cleaner Hexagon Bolt, 356/912
Part Number: N.010.354.1
Hexagon-headed bolt for mounting oval wire mesh filter. Fits Solex 40PII-4 carburetors, Super 90, SC, early 912. Washer part # N.011.524.7 is not included. Ten required.
$2.20
Throttle Ball Socket, RH Threaded, 356's/911/912 (50-77)
Part Number: N.015.521.3
Throttle rod ball socket for all 356, 911 and 912 models (1950-1977).
$19.05
Throttle Lever With Thrust Block, 356/912 (60-69)
Part Number: 616.100.977.00
Throttle lever with thrust block for 356B, 356C and 912 (1960-1969) models.
$28.50
Weber 40/44 IDF Mesh Air Cleaner
Part Number: CA-026D
Weber mesh air cleaner for 40/44 IDF carburetors for all 356's models. Cleaner has two 1 7/8" circular openings and one 1 3/8" x 1 1/8" rectangular opening.
Was: $138.92
Now: $106.15
On Sale
Weber 44IDF Velocity Stack
Part Number: SMC.948.000
Velocity stack for all models with duel Weber 44IDF carburetors. Add power to your Porsche with these stacks that feature a parabolic curvature that maximizes air flow efficiency and engine power. Precision formed from steel and chrome plated for a sporty appearance
Was: $21.65
Now: $17.32
On Sale
Weber 44IDF Velocity Stack Rubber Cover Set
Part Number: SMC.948.001
Set of four rubber covers for Weber 44IDF velocity stacks.
$35.00
Weber Air Cleaner, All 356's/912
Part Number: SMC.108.203.01
Weber air cleaner for 356, 356A, 356B, 356C and 912 models.
Was: $31.74
Now: $26.87
On Sale
Weber Carburetor and Manifold Adapter Kit, 356/912 (55-69)
Part Number: 616.108.103.01
Kit will replace SOLEX 40PII carburetors. Kit contain necessary parts for installation, carburetor, adapter for manifold, linkage and air cleaner.
$1,040.15
Weber Carburetor and Manifold Kit, 356 (55-65)
Part Number: 616.08.141
Kit will replace ZENITH 32NDIX or WEBER carburetors. Kit contains necessary parts for installation, carburetor, manifold (Part # 616.108.033.01), adapter, linkage and air cleaner.
$1,095.41
Weber Main Jets
Part Number: SMC.000.008
Main Jets for Weber IDF/IDA. Set of six.
$35.00
WR Torque Boosters for Solex 40P11 Carburetors
Part Number: WR.40P11
These air cleaner spacers are CNC machined from T6 aluminum and are complete with the necessary mounting hardware. They have been developed by WR and dyno tested to significantly improve the cylinder filling in the low and mid range by lengthening the intake canal by 2.25 inches. The dyno sheet shows the improvement in torque and hp between 3100 and 4800 rpm…right in the driving range. They fit 356 and 912 Coupes. These are too tall for Cab/Rdstr/Speedster.
$571.50
WR Torque Boosters for Weber 44IDF Carburetors
Part Number: WR.44IDF
These air cleaner spacers are CNC machined from T6 aluminum and are complete with the necessary mounting hardware. They have been developed by WR and dyno tested to significantly improve the cylinder filling in the low and mid range by lengthening the intake canal by 2.25 inches.
$489.95