Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356C (64-65) > Engine & Fuel Systems > Engine Block

.010 Paper Gasket, All 356's (50-65)
Part Number: 644.20.116
.010 cover plate paper gasket for all 356's (1950-1965).
$3.30
356 Complete Turn Key Engine
Part Number: SMC.356.001
Complete 356 turn key Engine. Please call our Sales Department for details and abilivility.
$14,800.00
Accelerator Pump Gasket, All 356's/912 (50-69)
Part Number: 692.100.968.00
Accelerator pump gasket for all 356 (1950-1965) and 912 (1965-1969) models.
$1.30
Accelerator Pushrod, 356/356A/356B/356C
Part Number: 644.23.016
Accelerator pushrod with sockets for all 356's.
$25.67
ACE-356 Deep Oil Sump Cover Kit, All 356's/912 (50-69)
Part Number: SMC.101.001.02
Deep oil sump beautifully machined from aluminum for all 356 and 912 models. Helps keep oil flowing to the bearings during hard cornering. Magnetic drain plug, seal and all necessary hardware included.
$595.00
ACE-356 Oil Return Tube Set, All 356's/912 (50-69)
Part Number: SMC.105.231.01
Solid push rod tube set for all 356's and 912's. Each set includes 8 tubes, 8 springs, 16 washers, and 16 seals.
$268.00
Aluminum Oil Cooler, All 356's/912
Part Number: SMC.107.041.01
Help prevent a cracked engine case with this aluminum oil cooler that is 45% lighter than the old steel coolers and covers 20% more surface area. Cooler weighs 1.8 pounds, includes hardware and (2) Oil Cooler Seal Rings #616.01.123.00
$509.80
Bearing Dowel Pin, all 356's/912 (Normal/Super)
Part Number: 539.01.110
Bearing dowel pin for all 356 and 912 models.
$7.21
Bearing Set, 356 Carrera (55-65)
Part Number: 547.052.911S
Bearing set for 356 Carrera (1955-1965) models with 547 engines.
$165.74
Bell Crank/Throttle Linkage, 356A/356B/356C/911 (58-69)
Part Number: 616.08.011
Bell crank/throttle linkage for 356A (1958-1959), 356B (1960-1963). 356C (1964-1965) and early 911 (1965-1969) models.
$360.66
Beveled Case Washer, All 356's/912 (50-69)
Part Number: 616.101.191.00
Beveled case washer for all 356's and 912 models (1950-1969).
$7.98
Bolt, 8mm x 45mm
Part Number: 900.074.134.02
Intercooler bolt for all 356's, 911, 912, 930, 924 and 928 (1950-1989) models.
$1.66
Bottom Flange Cover, All 356's/912 (50-69)
Part Number: 539.06.526
Bottom flange cover for 356, 356A, 356B, 356C, and 912 (1950-1969) models.
$19.14
Breather Hose, 356B(T6)/356C
Part Number: 616.107.791.00
Oil breather hose for 356B(T6) and 356C models with European heater system.
$9.13
Breather Tube, All 356's/912
Part Number: 616.107.075.00
Breather metal connecting tube. One needed.
$84.95
Cam Cover End Plug, 356/911/912 (50-69)
Part Number: 539.01.132
Cam cover end plug.
$18.90
Cam Follower, 356/912
Part Number: 539.05.210
OEM camshaft follower for all 356 and 912 models (1950-1969). Eight required.
$41.66
Camshaft Gear (-3), All 356's/912 (50-69)
Part Number: 616.105.103.51
-3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$154.50
Camshaft Gear (-4), All 356's/912 (50-69)
Part Number: 616.105.103.71
-4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear (+1), All 356's/912 (50-69)
Part Number: 616.105.103.32
+1 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$593.30
Camshaft Gear (+3), All 356's/912 (50-69)
Part Number: 616.105.103.61
+3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$123.92
Camshaft Gear (+4), All 356's/912 (50-69)
Part Number: 616.105.103.81
+4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear Dowel Pin, 6x12mm
Part Number: N.013.199.1
Camshaft gear dowel pin for 356, 356A, 356B, 356C, 912 and 928 models (1950-1995). Three required for all 356 models. This item measures 6 x 12mm.
$0.77
Camshaft Gear, 356A/356B/356C/912 (56-69)
Part Number: SMC.105.103.02
Camshaft gear, size .001, fits 356A (1956-1959), 356B (1960-1963), 356C (1964-1965), and 912 (1965-1969).
$90.00
Camshaft Gear, 356A/356B/356C/912 (56-69)
Part Number: 616.105.103.02
Camshaft gear, size 0, fits 356A (1956-1959), 356B (1960-1963), 356C (1964-1965), and 912 (1965-1969).
$514.50
Camshaft, All 356's/912 (50-69)
Part Number: 616.105.105.00
Camshaft (w/out gear) fits all 356 and 912 models (1950-1969).
$563.26
Carburetor Hose Cap, 356/911/912/914 (50-76)
Part Number: 901.108.219.00
Carburetor hose cap for all 356 (1950-1965), 911/912 (1965-1969) and 914 (1970-1976) models.
$13.26
Carburetor Linkage Push Rod (60-69)
Part Number: 616.108.620.00
Push rod for bell crank/throttle linkage with right hand thread for 356B (1960-1963), 356C (1964-1965), 911 (1965-1969) and 912 (1965-1969) models. One required.
$13.85
Case Nut (50-77)
Part Number: 999.070.004.02
Case nut for all 356, 911 and 912 models. Thirteen required.
$7.35
Circlip, All 356's/912 (50-69)
Part Number: 999.041.001.01
Circlip for all 356 (1950-1965) and 912 (1965-1969) models.
$0.89
Clamp, 356C (64-65)
Part Number: 999.512.346.00
Clamp for 356C models (1964-1965). Please note this item is for use with models that have an American heater system.
$2.49
Concave Washer, 911/912 (65-69)
Part Number: 616.108.904.15
Concave Washer for fuel pump.
$1.42
Connecting Rod Nut, All 356's/912
Part Number: 502.03.114
Connecting rod nut for all 356 and 912 models (1950-1969). Eight required.
$3.71
Connecting Rod, all 356's/912
Part Number: 616.103.012.03
Currently unavailable
$738.25
Connecting Rod, Weight Group 14, 356/912 (50-69)
Part Number: 616.103.012.030.14
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 17: 505-514g.
$738.11
Connecting Rod, Weight Group 17, 356/912 (50-69)
Part Number: 616.103.012.030.17
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 14: 496-505g.
$738.11
Connecting Rod, Weight Group 20, 356/912 (50-69)
Part Number: 616.103.012.03.020
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 20: 514-523g.
$738.11
Copper Washer for Intermediate Piece, All 356's/912 (50-69)
Part Number: 369.01.111
Copper washer for the intermediate piece, but can be used in several parts of the car.
$3.25
Cover Plate Washer, All 356's/912
Part Number: 546.06.202
Cover plate washer for all 356 (as needed) and 912 models.
$5.13
Crank Pulley Bolt, All 356's/912 (50-69)
Part Number: 539.02.112
Crank pulley bolt for all 356 (1950-1965) and 912 (1965-1969) models.
$47.05
Crank Pulley Lock Washer, All 356's/912 (50-69)
Part Number: 539.02.111
Crank pulley washer for all 356 and 912 models (1950-1969).
$4.81
Crank Pulley, Sealing Washer, All 356's/912 (50-69)
Part Number: 616.102.163.01
Optional oil slinger ring, for early engines.
$10.45
Crankcase Gasket, 356C/912
Part Number: 616.101.391.00
No longer available
$4.31
Crankshaft Drive Gear
Part Number: 901.102.115.00
Brass distributor drive gear.
$69.95
Crankshaft Gear, all 356's/912 (50-69)
Part Number: 539.02.105
Steel crankshaft gear for 356, 356A, 356B, 356C and 912 models (1950-1969).
$382.00
Crankshaft Main Bearing Set, .25mm, 356C/912
Part Number: 616.100.138.60
Alloy main bearing set for crankshaft for 356C and 912 models (1965-1969). Inside standard, outside .25mm.
Was: $481.12
Now: $384.89
On Sale
Crankshaft Main Bearing Set, .25mm, 356C/912
Part Number: 616.100.138.50
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .25mm, outside standard.
$545.00
Crankshaft Main Bearing Set, .25mm/.25mm, 356C/912
Part Number: 616.100.138.70
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .25mm, outside .25mm.
$447.51
Crankshaft Main Bearing Set, .50mm, 356C/912
Part Number: 616.100.138.55
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .50mm, outside standard.
$515.00
Crankshaft Main Bearing Set, .50mm, all 356's/912 (50-69)
Part Number: 616.100.138.90
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits 0.50 mm case, standard crank and +1mm thrust.
$489.94
Crankshaft Main Bearing Set, .50mm/.25mm, 356C/912
Part Number: 616.100.138.75
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-1969). Inside .50mm, outside .25mm.
Was: $444.15
Now: $399.75
On Sale
Crankshaft Main Bearing Set, .50mm/.25mm, all 356's/912 (50-69)
Part Number: 616.100.138.95
Main bearing set for crankshaft for 356, 356A,356B, 356C and 912 models (1950-1969). Fits 0.50mm case, 0.25mm crank and +1mm thrust.
$448.95
Crankshaft Main Bearing Set, .50mm/.50mm, all 356's/912 (50-69)
Part Number: 616.100.138.10
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits .50mm case and .50mm crank.
$445.91
Crankshaft Main Bearing Set, 356C/356SC/912 (64-69)
Part Number: 616.100.138.00
Standard alloy main bearing set for crankshaft for 356C, 356SC and 912 models.
$461.51
Crankshaft Seal Tool
Part Number: 10.0536.011
Crankshaft seal tool, crankshaft mount portion.
$409.20
Crankshaft Seal Tool, Complete
Part Number: 10.0536.012
Complete crankshaft seal tool.
$722.11
Crankshaft Seal Tool, Mount Portion
Part Number: 10.0536.013
Crankshaft seal tool - mount portion.
$359.89
Crankshaft Timing Gear (50-76)
Part Number: 111.105.223
Aftermarket crankshaft timing gear for 356 Pre-A, 356A, 356B, 356C, 911, 912, 914-4 and 912E models.
$97.50
Crankshaft Timing Gear Key (50-76)
Part Number: 111.105.213
Crankshaft timing gear key fits all 356, 912, 912E, 914, and 914-4 models (1950-1976).
$5.53
Crankshaft, 1600S (75HP)
Part Number: 616.102.013.00
$2,710.51
Crankshaft, 356SC/912 (64-69)
Part Number: 616.102.015.01
Crankshaft. Fits 356 SC and 912 models.
$1,335.00
Crankshaft, 4340 Chromoly Billet, all 356's/912 (50-69)
Part Number: SMC.102.015.02
Currently unavailable
$1,649.95
Crankshaft, 4340 Chromoly Forged, all 356's/912 (50-69)
Part Number: SMC.102.015.01
CURRENTLY UNAVAILABLE

$1,209.95
Distributor Drive Shaft, all 356's/912 (50-69)
Part Number: 539.09.101
Distributor drive shaft for 356, 356A, 356B, 356C and 912 models (1950-1969).
$251.25
Drain Hose, 90 Degree Bend, 356C
Part Number: 644.571.921.07
Drain hose with a 90-degree bend for the vent box on 356C (1964-1965) models.
$29.50
Drive Line Fluid Filler, 8 Liter
Part Number: ATF.EURO.8
Drive Line Fluid Filler, 8 Liter.
$504.42
Engine Block Gasket Set, All 356's/912
Part Number: 616.101.901.01
Engine block gasket set for all 356 and 912 models (1950-1969).
$77.84
Engine Case Holder
Part Number: SMC.013.00
Engine case holder for all Porsche engines. Fits any standard roll away stand. It has three holes, but a fourth hole may be needed in order to fit a universal stand.
$103.24
Engine Case Stud, All 356's/912 (50-69)
Part Number: 539.01.118
Engine case stud. Sixteen needed.
$25.75
Engine Case Tie Bolt, 356A/356B/356C/912 (57-69)
Part Number: 616.101.171.00
Hexagon head bolt for tensioning engine crankcase for 356A, 356B, 356C and 912 models (1957-1969). One needed.
$11.40
Engine Case Washer, All 356's/912 (65-69)
Part Number: 043.101.129
Engine case washer for all 356 and 912 models (1950-1969).
$1.01
Engine Cover Plate, Left, All 356's/912
Part Number: 539.06.638
Left side cover plate at the flywheel end of the engine for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$56.60
Engine Cover Plate, Left, All 356's/912
Part Number: 539.06.640
Left side cover plate at the pulley end of the engine for all 356 (1950-1965) and 912 (1965-1969) models.
$58.98
Engine Cover Plate, Right, All 356's/912
Part Number: 539.06.639
Right side cover plate at the pulley end of the engine for all 356 (1950-1965) and 912 (1965-1969) models.
$56.62
Engine Cover Plate, Right, All 356's/912
Part Number: 539.06.637
Right side cover plate at the flywheel end of the engine for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$58.98
Engine Cover Plate, US Heater, All 356's (50-65)
Part Number: 369.06.119
Cover plate at the flywheel end of engine for all 356 models with US version heater.
$278.29
Engine Ducting Screw & Washer Set, All 356's/912
Part Number: 644.369.002.00
Pan-head engine shroud screw with washer for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$7.15
Engine Ducting Screw Set (Washers)
Part Number: 900.025.004.80
Price is for one. 25 washers required.
$0.19
Engine Ducting Seals, All 356's (50-65)
Part Number: 644.369.001.00
Engine ducting seals (USA version) for all 356 (1950-1965) models.
$27.95
Engine Exhaust Valve, 356C/912 (64-69)
Part Number: 616.105.406.00
Engine exhaust valve for 356C (1964-1965) and 912 (1965-1969) models with 1.6L engines.
$39.75
Engine Oil Drain Plug, 356/912 (50-69)
Part Number: 539.01.133
Engine oil drain plug for all 356's (1950-1965) and 912 (1965-1969).
$23.35
Engine Push Rod Tube Seal, All 356's/912 (50-69)
Part Number: 539.05.207.S
Wrightwood Racing engine push rod tube seal for all 356 (1950-1965) and 912 (1965-1969) models. 16 needed per car.
$1.75
Engine Seal, Left/Right, All 356's
Part Number: 616.106.897.00
Greatly effects the fans ability to cool your engine!
$9.56
Engine Shroud Screw with Washer, 6mm x 10mm (56-77)
Part Number: N.010.710.8
Engine shroud screw with washer for 356A, 356B, 356C, 911 and 914 (1955-1977) models.
$0.15