Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356B (60-63) > Engine & Fuel Systems > Fuel & Carburetor

40 IDF Weber Carburetor
Part Number: SMC.189.501.38
40 IDF Weber Carburetor.
$407.75
Accelerator Pump Kit, Solex 40PII-4, 356/912 (50-69)
Part Number: 616.100.356.40
Solex 40PII-4 accelerator pump kit.
$184.51
Accelerator Pump Volume Vial
Part Number: 000.721.025.10
This vial adjusts the pump volume discharge and helps assure smooth acceleration. May not fit early 356 carburetors.
$79.55
Air Filter, All 356's (Zenith 32 NDIX Carburetors)
Part Number: 616.08.811.1
Mahle air filter for 356, 356A, 356B and 356C models. Two required.
$15.38
AutoPulse Fuel Pump, Type 500, 356 Carrera
Part Number: SMC.547.08
500 type AutoPulse fuel pump for 356 Carrera models with 547 and 692 engines.
$8,803.60
Ball Pin For Linkage, Zenith 32NDIX/Solex 40 PII-4
Part Number: SMC.167.022.02
Ball pin to repair bell cranks, crossbars or any linkage part that takes an 8mm ball pin.
$9.25
Ball Socket Set (LH Threaded)
Part Number: SMC.169.LH.SET
Four (4) JORG brand ball sockets with snap ring for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963) and 356C (1964-1965) models.
Was: $24.51
Now: $19.99
On Sale
Ball Socket Set (RH Threaded)
Part Number: SMC.169.RH.SET
Four (4) ball sockets with snap ring for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1977) and 912 (1965-1969) models.
Was: $24.51
Now: $19.99
On Sale
Ball Socket, All 356/911/912
Part Number: 999.169.002.02
Four needed for the fresh air vent on 356B and 356C models. For needed for the throttle body for 911/912/930 models.
$8.98
Ball Socket, LH Threaded, All 356's (50-65)
Part Number: 900.169.008.02
Two needed for the linkage on 356 models.
$7.68
Ball Socket, LH Threaded, All 356's (50-65)
Part Number: 900.169.010.02
5mm left hand threaded ball socket, 8mm ball, fits all 356 models (1950-1965).
$8.50
Ball Socket, RH Threaded, All 356's (50-65)
Part Number: 900.169.013.02
Two needed.
$7.86
Ball Socket, RH Threaded, All 356's/911/912 (50-77)
Part Number: 900.169.001.02
Ball socket for 356 (1950-1955), 356A (1555-1959), 356B (1960-1963), 356C (1964-1965), 911 (1965-1977) and 912 (1965-1969) models.
$7.87
Banjo Hollow Hexagon Bolt (Solex 40P11)
Part Number: 616.100.867.00
Fuel line banjo bolt for Zenith carburetors. Two required.
$22.18
Base Gasket
Part Number: 616.108.291.00
Wire mesh filter base gasket for Solex 40PII-4 carburetors, Super 90, SC, and 912 models. Two required.
$13.12
Bell Crank Bushing, (50-89)
Part Number: 914.423.211.00
Accelerator bell crank bushing for all 356's, 911, 912, 914 and 930 models (1950-1989). Two required.
$2.31
Bell Crank Repair Kit, 356B/356C/911/912 (60-69)
Part Number: NLA.423.020.3M
Bell Crank repair kit for 356B, 356C, 911 and 912 models.
$16.92
Bell Crank, Rear Of Fan Housing
Part Number: 616.108.071.00
Bell crank, rear of fan housing. Fits Zenith 32NDIX & Solex 40PII-4.
$81.89
Bottom Mount Fuel Level Sender, 356B(T6) (62-63)
Part Number: 644.201.801.06
CURRENTLY UNAVAILABLE
Bottom mount fuel level sender for 356B(T6) (1962-1963) models.
$247.23
Braided Fuel Hose, Bulk (7mm)
Part Number: 644.180.001.00
Braided hose for fuel and oil. Sold by the meter.
$8.91
Braided Hose, Bulk (9mm)
Part Number: N.020.359.1
Braided hose for oil or fuel. Pressure-215 PSI Test Pressure- 430 PSI Burst Pressure-850 PSI. Sold by the meter.
$12.95
Buffer Block, Solex 40PII-4
Part Number: 692.100.993.01
Buffer block for 356, 356A, 356B, 356C and 912 (1950-1969) models with split shaft carburetors. Fits Solex 40PII-4. Two needed per car.
$4.95
Carburetor Air Mixture Screw Set (Solex/Weber)
Part Number: SMC.108.SET
Adjusting screw set for the carburetor idle air needle valve.
$14.97
Carburetor Gasket, All 356's/912 (50-69)
Part Number: 616.100.968.00
Carburetor gasket for all 356 (1950-1965) and 912 (1965-1969) models.
$5.50
Carburetor Kit, 356A/B/C (55-65)
Part Number: ZE-25K
Carburetor kit fot 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$72.13
Carburetor Kit, Solex 32 PBIC
Part Number: 900.070.19.00
Gasket kit for Solex 32 PBIC carburetors on all 356 models. Two required.
Was: $22.49
Now: $20.50
On Sale
Carburetor Kit, Solex 40PII-4
Part Number: 616.108.902.03
Solex 40PII rebuild gasket kit for all 356's and 912 models (1950-1969) with a divided throttle. Fits Solex 40PII-4 with split shaft.
$47.25
Carburetor Kit, Solex 40PII-4
Part Number: 616.108.902.02
Solex rebuild gasket kit for all 356's and 912 models with a solid throttle shaft.
$47.98
Carburetor Kit, Solex 40PJCB
Part Number: 616.08.902
Gasket kit for Solex 40PJCB carburetors on all 356 models.
$35.17
Carburetor Kit, Weber, All 356's/912 (50-69)
Part Number: SMC.100.949.00
The ultimate Weber rebuild kit for all 356 and 912 models (1950-1969).
$54.26
Carburetor Kit, Zenith 32 NDIX
Part Number: 616.108.902.01
Zenith 32 NDIX carburetor kit for all 356 (1956-1965) models with accelerator pump plunger included.
$49.85
Carburetor Kit, Zenith 32 NDIX
Part Number: 616.108.902.00
Zenith 32 NDIX carburetor kit for 356A(T-2), 356B and 356C models- accelerator pump plunger not included. You will need one per carburetor.
$52.30
Carburetor Linkage Push Rod (60-69)
Part Number: 616.108.620.00
Push rod for bell crank/throttle linkage with right hand thread for 356B (1960-1963), 356C (1964-1965), 911 (1965-1969) and 912 (1965-1969) models. One required.
$13.85
Carburetor Lock, Zenith 32 NDIX (55-65)
Part Number: 616.100.812.00
Carburetor lock used on Zenith 32 NDIX carburetor pump control linkage for 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$9.64
Carburetor Needle Valve, 356 (50-65)
Part Number: 616.100.974.01
Carburetor needle valve for 356 models 1950-1965 with Zenith 32NDIX Carburetors.
$34.35
Carburetor Pressure Push Rod, All 356's/911/912 (50-69)
Part Number: 616.08.012
Carburetor pressure push rod for linkage on 356 (1950-1955), 356A (1955-1959), 356B (1960-1963) 356C (1964-1965) 911 (1965-1969) and 912 (1965-1969) models. Has right hand thread on the top and left hand thread on the bottom. Fits Zenith 32NDIX & Solex 40PII-4, two required.
$13.95
Carburetor Return Spring, All 356's/912 (Solex)
Part Number: 999.522.003.02
Carburetor return spring for Solex 40PII-4. It fits all 356's and 912 (1950-1969).
$4.55
Carburetor Return Spring, All 356's/912 (Zenith)
Part Number: 616.08.119
Carburetor return spring for Zenith 32NDIX Carburetors. Two required.
$3.95
Carburetor Spring, All 356's (50-65)
Part Number: 616.100.810.00
Carburetor spring for all 356 (1950-1965) models. Four needed per car.
$2.23
Carburetor Stud (Weber IDA)
Part Number: SMC.000.002.12
Weber IDA carburetor stud.
$3.25
Carburetor to Manifold Gasket
Part Number: 616.108.901.02
Carburetor to manifold gasket for Solex 40PII-4. Eight required.
$2.12
Carburetor to Manifold Gasket, all 356's (50-65)
Part Number: 597.108.310.02
Caburetor to manifold gasket for 356, 356A, 356B and 356C models (1950-1965). This item fits Zenith 32NDIX carburetors. Two required.
$7.81
Carburetor Washer, All 356's/912 (50-69)
Part Number: 616.108.423.00
Carburetor washer for all 356's and early 912 models.
$0.90
Circlip, All 356's/912 (50-69)
Part Number: 999.041.001.01
Circlip for all 356 (1950-1965) and 912 (1965-1969) models.
$0.89
Cover Plate Bolt O-Ring, Zenith 32 NDIX
Part Number: 616.100.840.00
O-ring for the bolt to the cover plate on Zenith 32 NDIX carburetors,
$0.41
Distributor Cap Clip and Bracket Set, All 356's (50-65)
Part Number: SMC.616.100.00
Distributor cap clip and bracket set for all 356 (1950-1965) models.
$75.00
Dowel Pin, 8mm x 10mm
Part Number: 900.197.010.00
Dowel pin for shifters for all models.
$0.88
Electric Fuel Pump, 12 Volt, All 356/912 (50-69)
Part Number: 616.108.005.01
Electric 12 volt fuel pump for all 356's (1950-1969) and 912 (1965-1969) models.
$53.99
Flapper Box Repair Set (Double)
Part Number: 616.106.002.00
Double flapper box repair set.
$7.65
Flapper Box Repair Set (Single)
Part Number: 616.106.001.00
Single flapper box repair set.
$13.25
Float Pivot Arm (Weber IDA)
Part Number: SMC.000.002.10
Weber IDA float pivot arm.
$9.25
Fuel Feed Line, 356B/356C (60-65)
Part Number: 616.108.559.00
Feed line from body to fuel pump for 356B (1960-1963) models with late fuel pump and 356C (1964-1965) models.
$54.46
Fuel Line Fitting, 356B (60-63)
Part Number: 900.193.001.02
Fuel line fitting for 356B (1960-1963) models with an early fuel pump.
$15.50
Fuel Line Grommet, 356B/356C (60-65)
Part Number: 539.06.605
Grommet for fuel line on 356B and 356C (1960-1965) models. Two required.
$2.15
Fuel Line Sleeve, 356B (60-63)
Part Number: 539.08.201
Fuel line sleeve for 356B (1960-1963) models with an early fuel pump.
$10.85
Fuel line tank to pump, 356B (Early)
Part Number: 616.108.533.00
Fuel line tank to early style fuel pump.
$27.90
Fuel Line Union, 356B (60-63)
Part Number: 546.08.202
Fuel line union for 356B (1960-1963) models with an early fuel pump.
$31.17
Fuel Line, 356B/356C
Part Number: 616.108.059.00
Pump to carburetor fuel line. It fits 356B (w/late fuel pump) and 356C models.
$265.00
Fuel Pre-Pump, 356/912/911
Part Number: SMC.000.916
Fuel pre-pump for all models. It is designed to work as a pre-pump in 6 Volt systems or as a pump with higher fuel flow in 12 Volt systems. This pump is used to work in addition to your existing mechanical fuel pump.
$159.95
Fuel Pump Actuating Rod, 356A/356B
Part Number: 539.08.408
Actuating rod for fuel pumps. Fits 356A and 356B (1955-1963) models with an early fuel pump.
$12.85
Fuel Pump Bottom Plate, All 356's
Part Number: 616.106.831.00
Plate under fuel pump for all 356 models.
$22.54
Fuel Pump Flange, 356B/356C/912 (60-69)
Part Number: 616.108.441.00
Fuel pump block, fiber spacer. Fits 356B (with late pump), 356C (1964-1965), and 912 (1965-1969).
$35.23
Fuel Pump O-Ring, All 356's/912
Part Number: 999.701.043.50
This is the O-ring that goes on the bottom of the fuel pump and the fiber isolation block.
$5.50
Fuel Pump Rebuild Kit, 356A/356B(T5)
Part Number: 644.108.903.00
Rebuild kit for early style fuel pump. Fits 356A and 356B(T5) models.
$59.50
Fuel Pump Rebuild Kit, 356B(T6)/356C/912 (62-69)
Part Number: 644.108.903.01
Fits "Late" style fuel pumps. Fits 356B(T6), 356C and 912 models.
$35.15
Fuel Pump Screw Set, All 356's (50-65)
Part Number: NLA.108.100.00
Machine screw set for fuel pump fits all 356 models (1950-1965).
$11.25
Fuel Pump, 356/912 (55-69)
Part Number: PCG.108.401.00
Fuel pump for 356A (1955-1959), 356B (1960-1963), 356C (1964-1965) and 912 (1965-1969) models.
$429.05
Hose Clamp (9.5mm-12mm)
Part Number: 999.512.055.02
Hose clamp with a 9.5mm-12mm range.
$2.15
Insulating Spacer Gasket, 356A/356B (55-63)
Part Number: NLA.08.405
Additional gasket for insulating spacer, .5mm thick, fits 356A and 356B (w/early fuel pump).
$1.70
K&N Solex 40PII-4 Air Cleaner, All 356's/912
Part Number: 100.5
The K&N FilterCharger® air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life.
$156.88
K&N Weber 40IDF Air Cleaner, All 356's/912
Part Number: 100.6
The K&N FilterCharger® air filter is designed to achieve high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life.
$98.66
Manifold to Head Gasket, Solex 40PII-4
Part Number: 616.108.905.00
Manifold base to head gasket. Two required per engine.
$3.71
Mechanical Fuel Pump, 356/356A/356B(Early)
Part Number: 616.108.401.X1
This is the early version fuel pump.
$523.00
Mechanical Fuel Pump, 356B/356C/912
Part Number: 616.108.401.X2
This is the late version fuel pump.
$460.00
Needle Valve Plug (Weber IDA)
Part Number: SMC.000.002.11
Weber IDA needle valve plug.
$9.25
Oil Line Banjo Bolt, 356B(T6)/356C/912 (63-69)
Part Number: 616.07.812
Threaded banjo bolt for engine oil line for 356B(T6), 356C and 912 (1963-1969) models.
$15.00
Oil Line, 356/912 (56-69)
Part Number: PCG.07.826
Oil line from the bottom of the oil filter housing to the engine. Fits 356A (1956-1960), 356B (1960-1963), 356C (1964-1965) and 912 (1965-1969) models.
$23.88
Oil Pressure Kit, All 356's/Spyder (50-65)
Part Number: 547.07.113S
Oil pressure kit - 547-692/0. CNC machined, zinc plated and stainless steel piston. Complete with correct spring. For 356 Carrera 1500/1600 engines and 550 Spyder models.
$62.55
Oil Pump Drive Shaft, 356 (50-63)
Part Number: 539.070.14
Oil pump drive shaft for 356 (1950-1963) models.
$271.51
Operating Shaft With Flaps, All 356's (50-65)
Part Number: 546.06.065
Operating shaft with flaps for all 356 (1950-1965) models.
$276.91
Pierburg Fuel Pump Diaphragm, 356B/356C/912
Part Number: 5354
Pierburg fuel pump diaphragm that is an exact reproduction and perfect for concours shows!
$64.95
Pivot Ball For Cross Shaft, Linkage
Part Number: 999.167.012.02
Pivot ball for cross shaft, 2 req'd. Fits Zenith 32NDIX & Solex 40PII-4.
$16.50
Shaft Repair Kit, All 356's (50-65)
Part Number: 546.06.066
Operating shaft repair kit for all 356 (1950-1965) models.
$15.19
Solex 40 P11-4 Air Cleaner, Super 90/SC/912
Part Number: 616.108.203.01
Air filter for all Solex 40 and 44 carburetors for Porsche 356 Super 90, 356SC, 912 and 356 Carrera models.
$475.05