Your main source for Parts & Accessories
for all Porsche® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356A (55-59) > Heat and Exhaust

Air Duct, All 356's 912 (50-69)
Part Number: 546.06.062
Air duct for all 356 and 912 models.
$42.00
Air Guide Housing, all 356/912 (50-69)
Part Number: 616.106.013.12
Air guide housing for the fan shroud for all 356, 356A, 356B, 356C and 912 models (1950-1969).
$545.79
Air Guide Tube, Left, All 356's/912
Part Number: 546.06.063
Left side air guide tube for all 356 and 912 models.
$88.18
Air Guide Tube, Right, All 356's/912
Part Number: 546.06.064
Right side air guide tube for all 356 and 912 models.
$127.40
Air Hose All 356's/912 (50-69)
Part Number: 616.211.296.00
Rubber short hose for 356 and 912 (1950-1969) European exhaust.
$13.35
Bursch Header & Stinger, All 356's
Part Number: BA 7916-5356
Bursch header and stinger complete system that replaces the stock exhaust system on all 356 models.
$575.25
Bursch Header Muffler, All 356's/912
Part Number: BA 7916
Muffler for header system on 356, 356A, 356B, 356C and 912 models. It goes in place of the stinger to make it street usable.
$590.07
Bursch Header, All 356's/912
Part Number: BA 7916-5B
Header for Bursch mufflers.
$496.50
Bursch J-Pipes, All 356's (50-65)
Part Number: BA 7919-B
Inexpensive alternative to buying stock pipes with heater boxes!
$132.32
Bursch Muffler, 356/356A (Comb.)
Part Number: BX 5602
Increase your horsepower and torque with this hand welded muffler for 356 models. This muffler is the combination style.
$347.42
Bursch Muffler, 356/356A (Quiet Comb.)
Part Number: BX 5604
Increase your horsepower and torque with this hand welded muffler for 356 models. This is the quiet combination style muffler.
$347.42
Bursch Muffler, 356/356A (Quiet Street)
Part Number: BX 5603
Increase your horsepower and torque with this hand welded muffler for 356 models. This is the quiet street style muffler.
$306.25
Bursch Muffler, 356/356A (Street)
Part Number: BX 5601
Increase your horsepower and torque with this hand welded muffler for 356 models. This muffler is the street syle.
$306.25
Bursch Muffler, 356B/356C (Quiet Comb.)
Part Number: BX 5624
Increase your horsepower and torque with this hand welded muffler for 356 models. This muffler is the quiet combination style for models with European heater boxes.
$381.25
Bursch Muffler, 356B/356C (Quiet Street)
Part Number: BX 5623
Increase your horsepower and torque with this hand welded muffler for 356 models. This muffler is the quiet street style for models with European heater boxes.
$366.54
Cable Clamp Nut, (65-89)
Cable clamp nut for most models from 1965 to 1989.
$8.21
Dansk Muffler, 356 (50-55)
Part Number: 546.54.106
Dansk muffler comes with one straight tail pipe for 356 Pre-A models.
$861.03
Dansk Muffler, 356A (55-59)
Part Number: 616.111.010.00
356A muffler with dual pipe exhaust (290mm apart).
Was: $501.50
Now: $351.05
On Sale
Dansk Rear Manifold Exhaust, 356A/356B/356C (55-65)
Part Number: PO.92710
CURRENTLY UNAVAILABLE

$625.67
Dansk Sport Muffler, All 356's
Part Number: 616.54.103
Dansk sport muffler comes with two straight tail pipes in Carrera® 4 cam style for all 356 models and years. Painted stainless steel. Chrome tips part # 546.54.101 are NOT included.
$764.10
Exhaust Flange, All 356's/912 (50-69)
Part Number: 369.54.103
8.6 mm thick exhaust flange for repair purposes or custom exhaust applications, 4 required. Fits 356, 356A, 356B, 356C and 912 models.
$28.85
Exhaust Gasket, All 356's/912 (50-69)
Part Number: 616.111.291.00
This Muffler gasket is our own high quality reproduction that you won't find anywhere else. The 1.7mm thick gasket is made in Europe to be thicker than the original. Fits 356, 356A, 356B, 356C and 912 models. Four required.
$4.29
Exhaust Lock Nut, 8mm x 12mm
Part Number: 11.62.1.711.954
Copper flanged exhaust lock nut. Measures 8mm x12mm.
$0.65
Exhaust Manifold Stud, All 356's/912
Part Number: 999.062.005.02
8mm x 20mm stud. It fits 356, 356A, 356B, 356C, 911, and 912 models (1950-1969). Four required.
$6.86
Flapper Box, Left, Super 90/SC
Part Number: 616.106.041.00
Flapper Box. Left side.
$692.84
On Sale
Flapper Box, Right, Super 90/SC
Part Number: 616.106.042.00
Flapper Box. Right side.
$692.84
On Sale
Flat Washer (8mm x 37mm)
Part Number: 900.025.007.03
Flat washer measuring 8mm x 37mm.
$1.40
Grommet (11mm-17.5mm)
Part Number: 999.702.119.50
Rubber grommet for an opening with a diameter of 18mm.
$4.62
Guide Sleeve, 356/356A (50-59)
Part Number: 644.424.731.00
Guide sleeve for 356 and 356A models (1950-1959).
$5.76
Heat Exchanger, Left, 356A/356B/356C (55-65)
Part Number: 644.211.003.00
Painted steel Dansk heat exchanger for the left side on US version muffler, fits 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$378.50
Heat Exchanger, Right, 356A/356B/356C (55-65)
Part Number: 644.211.004.00
Painted steel Dansk heat exchanger for the right side on US version muffler, fits 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$378.50
Heater Box Control Sleeve, All 356's (50-65)
Part Number: 644.211.751.00
Heater control rod sleeve for all 356 models. Six required.
$4.60
Heater Box Hexagon Bolt, All 356's (50-65)
Part Number: 644.211.755.00
Hexagon headed bolt for heater box on all 356 models. Two required.
$7.63
Heater Box Return Spring
Part Number: 539.06.644
Heater box return spring.
$6.80
Heater Box Smooth Bolt, All 356's (50-65)
Part Number: 644.211.755.01
Smooth bolt for heater control rods on all 356 models. Four required.
$6.20
Heater Cable (1701mm) 356A
Part Number: 644.24.415
Heater cable for 356A models which measure 1701mm. Two required.
$18.41
Heater Cable Cover Boot, All 356's (50-65)
Part Number: 356.24.408
Rubber boot for heater cable cover for all 356 models (1950-1965). Two required.
$6.90
Heater Control Rod Hardware Kit
Part Number: 644.211.901.00
This kit contains the necessary bolts, spacers, nuts and washers to install the heater control rods between the flapper boxes and heater valves. 24 pieces are included.
$52.04
Heater Control Rod Spring Washer, All 356's (50-65)
6mm spring washer for heater control rods on all 356 models. Six required.
$1.00
Heater Control Rod, Left, All 356's (50-65)
Part Number: 644.211.701.00
Heater control rod for left side on all 356 models (1950-1965).
$6.50
Heater Control Rod, Right, All 356's (50-65)
Part Number: 644.211.702.00
Heater control rod for right side on all 356 models.
$6.85
Heater Valve to Body Clamp, All 356's
Part Number: PCG.211.251.00
Heater valve to body clamp. Two required.

**Screw is not included.
$13.88
Heater Valve, Left, 356A (55-59)
Part Number: 644.211.021.00
Painted steel heat control box for the left side on 356A models (1955-1959).
$167.50
Heater Valve, Right, 356A (55-59)
Part Number: 644.211.022.00
Painted steel heat control box for the right side on 356A (1955-1959) models.
$165.00
Heater/Defroster Rubber Hose (Under the Dash), 356A/356B(T5)
Part Number: 644.572.691.06
This is the rubber hose that connects the heater/defroster under the dash. It fits Porsche 356A and 356B(T5) models. Two required.
$14.47
Hex-head Screw, M8 x 35, All 356's
Part Number: 900.074.037.02
Hex-head Screw, 8 x 35, for 356 Pre-A (1950-1955), 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$2.16
Hot Air Hose, 24.5mm x 1000mm, 356/911/912 (55-69)
Part Number: 000.043.205.15
Hot air hose for 356A, 356B and 356C (1955-1965), 911 (1965-1968) and 912 (1965-1968) models.
$7.77
Hot Air Hose, 356/356A (50-59)
Part Number: 644.211.921.00
Heater hose measuring 50mm x 270mm. Two required. Use with hose clamp #999.512.348.02.
$6.68
Hot Air Hose, 50mm x 1080mm
Part Number: SMC.100.613.087
Universal aftermarket 50mm x 1080mm hose with the correct OE paper/alum/paper material. ­
$5.26
Hot Air Hose, 60mm x 150mm (Aftermarket)
Part Number: 22396C
Aftermarket aluminum hot air hose for early Porsche models. 60mm x 150mm.
$3.51
Hot Air Hose, All 356's/912 (50-69)
Part Number: 911.211.522.01
Black aluminum hose for 356 and 912 (1950-1969) European exhaust. 60mm X 1110 mm.
$20.08
IDF Carburetor Repair Kit
Part Number: 92.3240.05
Rebuild Kit for 40 44 48 IDF Weber Carburetors. Kit includes early and late style accelerator pump diaphragms, 40 44 48 IDF top cover gaskets, base gaskets etc.. See picture for parts included. One needed per carburetor.
$23.69
J-Pipe, Left, 356A/356B/356C (55-65)
Part Number: 92.221J
J-pipe for the left side of 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$94.00
J-Pipe, Right, 356A/356B/356C (55-65)
Part Number: 92.222J
J-pipe for the right side of 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$94.00
Link, Zenith Pump Control, 32NDIX (56-65)
Part Number: 616.100.809.00
Pump control link for 356A (1956-1959), 356B (1960-1963) and 356C (1964-1965) models. Two required.
$64.70
Lock Nut, 6mm
Part Number: 900.076.010.01
CURRENTLY UNAVAILABLE

$0.10
Lock Nut, 6mm, All 356's/944 (50-91)
Part Number: 900.076.010.02
6mm lock nut for all 356 (1950-1965) and 944 (1985-1991) models. Six required.
$0.30
Muffler Funnel, 356A(T2) (58-59)
Part Number: 644.505.305.00
Cast aluminum muffler funnel for 356A(T2) models with bumper guard exhaust systems. Two required. New and improved version with machined end to fit into bumper guard, just as the original!
$85.68
Muffler Pipe Kit, 356A
Part Number: 616.111.005.00
It fits all OE mufflers for 356A models (1955-1959). Painted aluminized steel.
$141.12
Muffler Tip With Square Rolled Edge
Part Number: 547.54.110
Brand new high quality reproduction of the early exhaust chrome tip with correct SQUARE ROLLED EDGE. Factory installed on 356 Super and optional for all other models with Sport muffler (part # 616.54.103). Heavy brass pipe with deep chrome, 120 gr. For 45mm pipes, 160m length.
$59.15
Muffler to Heater Exchange Clamp, All 356's/912
Part Number: SMC.54.109
Muffler to heater exchanger clamp for all 356's and 912 models. Two required.
$6.95
Muffler to Heater Exchange Clamp, All 356's/912
Part Number: 369.54.109
Muffler to heater exchanger clamp for all 356's and 912 models. Two required.
$15.06
Painted Stainless Steel Heater Control Box Set, 356A (55-59)
Part Number: SMC.644.211.00.B
Painted stainless steel heater control box set for 356A (1955-1959) models.
$377.44
Pipe Clamp with Bracket, All 356's (50-65)
Part Number: 616.111.025.00
Pipe clamp with bracket for all 356 models (1950-1965).
$14.25
Race Exhaust Megaphone Set, All Models
Part Number: 902057
A special tuning chamber in these megaphones increases your horsepower and torque when at high RPMs.
Was: $144.95
Now: $95.00
On Sale
Seal Ring,18mm x 24mm
Part Number: 900.123.11.30
Seal ring for pressure pipe pump converter. Measures 18mm x 24mm.
$2.20
Sport Exhaust Muffler, all 356's (50-65)
Part Number: PO.92104
Sport exhaust muffler for 356, 356A, 356B and 356C models (1950-1965). This muffler is painted steel and come with straight, stainless steel tips.
$948.82
Sport Muffler, Silver, All 356's (50-65)
Part Number: SMC.616.54.103
Sport muffler comes with two straight tail pipes in Carrera® 4 cam style for all 356 models and years. Painted stainless steel. Chrome tips part # 546.54.101 are NOT included.
$998.50
Stainless Steel Heater Control Box Set, 356A (55-59)
Part Number: SMC.644.211.00
Stainless steel heater control box set for 356A (1955-1959) models.
$377.44
Tail Pipe, 356A/356B/356C (55-65)
Part Number: 901.111.245.02
Tail pipe for 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models. Measures 170mm x 60mm (ID = 45.5mm/50.5mm). Polished stainless steel.
$38.62