Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356A (55-59) > Bumpers & Deco > Rear Bumper

Front Bumper Guard, Left, 356 Pre-A, 356A(T1)
Part Number: 644.505.031.00
Concours quality reproduction LEFT FRONT or RIGHT REAR aluminum bumper guard.
$265.00
Front Bumper Guard, Right, 356 Pre-A, 356A(T1)
Part Number: 644.505.032.00
Concours quality reproduction RIGHT FRONT or LEFT REAR bumper guard.
$265.00
Hexagon Nut, 8 mm, All 356's
Part Number: 900.076.013.02
Hexagon Nut, 8 mm, for 356 Pre-A (1950-1955), 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.
$2.18
Rear Bumper, 356/356A (52-59)
Part Number: 644.505.021.00
Rear bumper for 356 and 356A (1952-1959) models.
$583.67
Rear Bumper Deco, 356/356A
Part Number: 644.505.043.00
Complete rear bumper deco with base gasket and insert. This will fit 356 and 356A models.
$100.00
Rear Bumper Guard, Left 356A(T1)
Part Number: 644.505.033.00
Concours quality reproduction short version polished aluminum left rear bumper guard with exhaust hole used on cars without overrider protection tubes.
$295.00
Rear Bumper Guard, Left, 356A (T2)
Part Number: 644.505.035.10
Concours quality reproduction rear bumper guard with exhaust hole for 356A models. 155mm. The height represents the distance between the mounting studs.
$298.00
Rear Bumper Guard, Right 356A(T1)
Part Number: 644.505.034.00
Concours quality reproduction short version polished aluminum right rear bumper guard with exhaust hole used on cars without overrider protection tubes.
$295.00
Rear Bumper Guard, Right, 356A (T2)
Part Number: 644.505.036.10
Concours quality reproduction rear bumper guard with exhaust hole for 356A(T2) models. 155mm. The height represents the distance between the mounting studs.
$298.00
Muffler Funnel, 356A(T2) (58-59)
Part Number: 644.505.305.00
Cast aluminum muffler funnel for 356A(T2) models with bumper guard exhaust systems. Two required. New and improved version with machined end to fit into bumper guard, just as the original!
$90.45
Muffler Pipe Kit, 356A
Part Number: 616.111.005.00
It fits all OE mufflers for 356A models (1955-1959). Painted aluminized steel.
$141.12
Muffler Pipe Kit, 356B/356C
Part Number: 616.111.006.60
Painted galvanized steel tail pipe set for 356B (1960-1963) and 356C (1964-1965) US models and 356B(T5) European models.
$138.50
On Sale
Muffler Tip With Square Rolled Edge
Part Number: 547.54.110
Brand new high-quality reproduction of the early exhaust chrome tip with correct SQUARE ROLLED EDGE. Factory installed on 356 Super and optional for all other models with Sport muffler (part # 616.54.103). Heavy brass pipe with deep chrome, 120 gr. For 45mm pipes, 160m length.
$59.15
Race Exhaust Megaphone Set, All Models
Part Number: 902057
A special tuning chamber in these megaphones increases your horsepower and torque when at high RPMs.
Was: $144.95
Now: $95.00
On Sale
Rear Bumper Deco Insert, 356/356A
Part Number: 644.505.413.00
Rubber insert for rear bumper deco of 356 and 356A models.
$20.05
Rear Bumper Deco Base Gasket, 356/356A
Part Number: SMC.505.049.00
Rear bumper deco base gasket for 356 and 356A models.
$18.93
Rear Support Tube Set, 356/356A
Part Number: 644.505.261.00
Painted steel support tube set for 356 and 356A models.
$85.65
Rear Bumper Bracket Set, 356/356A
Part Number: 644.505.231.00
Rear bumper bracket set for 356 (Mid 1952-1955) and 356A (1955-1959) models.
$69.50
Rear Bumper Bracket, 356/356A (52-59)
Part Number: SMC.505.231.10
Rear bumper bracket for 356 Pre-A and 356A models. This bracket welds onto the bumper. Four needed per car.
$43.75
Guard Beading Profile, 356/356A (50-59)
Part Number: 644.505.391.00
Plastic profile for short and tall bumper guards on the 356 and 356A (1950-1959) models. Two required.
$6.80
Bumper Bracket Bar Set, 356/356A
Part Number: SMC.505.131.55
Bumper bracket bar set.
$8.10
Bumper Guard Attaching Nut, 356/356A
Part Number: 644.505.335.00
Rear bumper guard attaching nut for 356 and 356A models using exhaust funnels. Two required.
$24.10
Rear Grommet, Oval, 356/356A
Part Number: 644.505.291.00
Oval grommet for rear protection tube outer end on 356 and 356A models.
$7.68
Rear Grommet, Round, 356/356A
Part Number: 644.505.291.01
Round grommet for rear protection tube inner end on 356 and 356A models.
$6.50
Grommet, 356/356A
Part Number: 644.505.171.00
Grommet for protection tube supports on 356 and 356A models. Four required.
$5.87
Bumper Bracket Hexagon Bolt & Washer Set
Part Number: SMC.000.891
Hexagon-headed bumper bracket bolt and waster set fits 356 and 356A models (1950-1959).
$8.35
Bumper Cap Nut, 356/356A
Part Number: 644.085.001.00
Bumper cap nut for 356 and 356A models. Four required.
$1.60