Part Number: 356.42.169
Holding pin for brake shoes on 356, 356A and 356B models (1950-1963).

Part Number: 900.075.087.03
Hex head bolt measuring 8mm x 16mm. It fits 911, 914, 928, and 944 (1970-1991) models.

Part Number: 900.076.013.02
Hexagon Nut, 8 mm, for 356 Pre-A (1950-1955), 356A (1955-1959), 356B (1960-1963) and 356C (1964-1965) models.

Part Number: 644.352.513.01
Rear wheel cylinder, left and right, for 356, 356A and 356B (1950-1963) models.

Part Number: SMC.000.695.KIT
Dansk complete wheel cylinder kit for 356, 356A and 356B models (1950-1963). This kit includes the upper, lower and rear wheel cylinder for the left and right sides. Please note the banjo bolts (#999.215.027.03) and the banjo bolt fittings (#914.355.531.00 and #999.135.002.02) are not included. One kit needed per car.

Part Number: SMC.695.KIT
Complete wheel cylinder kit for 356, 356A and 356B models (1950-1963).

Part Number: 644.331.061.X
Refurbished rear brake set for 356 and 356A models (1950-1959).

Part Number: SMC.355.011
100% bolt-on conversion disc brake kit for 356 (1950-1955) and 356A (1955-1958) models. Excellent stopping performance.

Part Number: SMC.000.815
Brake line and brake hose kit for 356A, 356B and 356C models (1955-1965).

Part Number: 644.351.912.00
Repair kit for front or rear wheel cylinder fits 356, 356A, and 356B (1950-1963) models.

Part Number: 644.351.912.01
Repair kit for front or rear wheel cylinder fits 356, 356A, and 356B models (1950-1963).

Part Number: NLA.42.127
Wheel cylinder space plate for 60mm brake drum for 356, 356A, 356B and 356C models (1950-1965).

Part Number: 644.24.238
Rear brake cable for 356A and 356B (1955-1963) models. Two required.

Part Number: 695.352.602.01
Steel center brake line for all 356 models (1950-1965).

Part Number: 356.42.028
Rear brake hose for left or right side on 356 Pre-A and 356A models.

Part Number: 356.42.184
Brake bridge metal pipe for 356, 356A and 356B drum brakes.

Part Number: 356.42.174
Rear brake adjusting spring for all 356 models with drum brakes. Holds "star" wheel on brake cylinder. Use 900.027.001.01 washer and 900.016.001.01 screw.

Part Number: NLA.42.336
Only one left

Part Number: 901.355.531.00
Banjo bolt for front upper and rear wheel cylinders. Four required for 356 models and two required for 911/912 models.

Part Number: 914.355.531.00
Banjo fitting for front upper and rear wheel cylinders.