Your main source for Parts & Accessories
for all PorscheĀ® Automobiles
888-986-4466
626-844-4616 (Outside U.S.)
Info@SierraMadreCollection.com
Menu

> 356 Pre-A (50-55) > Engine & Fuel System > Engine Block

.010 Paper Gasket, All 356's (50-65)
Part Number: 644.20.116
.010 cover plate paper gasket for all 356's (1950-1965).
$3.30
Accelerator Pull Rod, 356 Pre-A/356A (50-59)
Part Number: NLA.23.019
Accelerator pull rod for 356 Pre-A and 356A models (1950-1959).
$37.95
Accelerator Pump Gasket, All 356's/912 (50-69)
Part Number: 692.100.968.00
Accelerator pump gasket for all 356 (1950-1965) and 912 (1965-1969) models.
$1.30
Accelerator Pushrod, 356/356A/356B/356C (50-65)
Part Number: 644.23.016
Accelerator pushrod with sockets for all 356 (1950-1965) models.
$25.67
ACE-356 Deep Oil Sump Cover Kit, All 356's/912 (50-69)
Part Number: SMC.101.001.02
Deep oil sump beautifully machined from aluminum for all 356 and 912 models. Helps to keep oil flowing to the bearings during hard cornering. Magnetic drain plug, seal and all necessary hardware included.
$595.00
ACE-356 Oil Return Tube Set, All 356's/912 (50-69)
Part Number: SMC.105.231.01
Solid push rod tube set for all 356's and 912's. Each set includes 8 tubes, 8 springs, 16 washers, and 16 seals.
$268.00
Aluminum Oil Cooler, All 356's/912
Part Number: SMC.107.041.01
CURRENTLY ON BACK ORDER
Help prevent a cracked engine case with this aluminum oil cooler that is 45% lighter than the old steel coolers and covers 20% more surface area. Cooler weighs 1.8 pounds, includes hardware and (2) Oil Cooler Seal Rings #616.01.123.00
$509.80
Bearing Dowel Pin, All 356's/912 (Normal/Super)
Part Number: 539.01.110
Bearing dowel pin for all 356 and 912 models.
$7.21
Beveled Case Washer, All 356's/912 (50-69)
Part Number: 616.101.191.00
Beveled case washer for all 356's and 912 models (1950-1969).
$7.98
Bolt, 8mm x 45mm (50-89)
Part Number: 900.074.134.02
Intercooler bolt for all 356's, 911, 912, 930, 924 and 928 (1950-1989) models. Measures 8mm x 4mm.
$1.66
Bottom Flange Cover, All 356's/912 (50-69)
Part Number: 539.06.526
Bottom flange cover for 356, 356A, 356B, 356C, and 912 (1950-1969) models.
$19.14
Cam Cover End Plug, 356/911/912 (50-69)
Part Number: 539.01.132
Cam cover end plug for 356 (1950-1965), 911 (1965-1969) and 912 (1965-1969) models.
$18.90
Cam Follower, 356/912
Part Number: 539.05.210
OEM camshaft follower for all 356 and 912 models (1950-1969). Eight required.
$41.66
Camshaft Gear (-3), All 356's/912 (50-69)
Part Number: 616.105.103.51
-3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$154.50
Camshaft Gear (-4), All 356's/912 (50-69)
Part Number: 616.105.103.71
-4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear (+1), All 356's/912 (50-69)
Part Number: 616.105.103.32
+1 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$593.30
Camshaft Gear (+3), All 356's/912 (50-69)
Part Number: 616.105.103.61
+3 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$123.92
Camshaft Gear (+4), All 356's/912 (50-69)
Part Number: 616.105.103.81
+4 camshaft gear for all 356 (1950-1965) and 912 (1965-1969) models.
$118.45
Camshaft Gear Dowel Pin, 6x12mm
Part Number: N.013.199.1
Camshaft gear dowel pin for 356, 356A, 356B, 356C, 912 and 928 models (1950-1995). Three required for all 356 models. This item measures 6 x 12mm.
$0.77
Camshaft, All 356's/912 (50-69)
Part Number: 616.105.105.00
Camshaft (w/out gear) fits all 356 and 912 models (1950-1969).
$563.26
Carburetor Hose Cap, 356/911/912/914 (50-76)
Part Number: 901.108.219.00
Carburetor hose cap for all 356 (1950-1965), 911/912 (1965-1969) and 914 (1970-1976) models.
$13.26
Case Nut (50-77)
Part Number: 999.070.004.02
Case nut for all 356, 911 and 912 models. Thirteen required.
$7.35
Circlip, All 356's/912 (50-69)
Part Number: 999.041.001.01
Circlip for all 356 (1950-1965) and 912 (1965-1969) models.
$0.89
Connecting Rod Nut, All 356's/912
Part Number: 502.03.114
Connecting rod nut for all 356 and 912 models (1950-1969). Eight required.
$3.71
Connecting Rod, all 356's/912
Part Number: 616.103.012.03
Currently unavailable
$738.25
Connecting Rod, Weight Group 14, 356/912 (50-69)
Part Number: 616.103.012.030.14
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 17: 505-514g.
$738.11
Connecting Rod, Weight Group 17, 356/912 (50-69)
Part Number: 616.103.012.030.17
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 14: 496-505g.
$738.11
Connecting Rod, Weight Group 20, 356/912 (50-69)
Part Number: 616.103.012.03.020
Connecting rod for all 356 (1950-1965) and 912 (1950-1969) models. Weight group 20: 514-523g.
$738.11
Copper Washer for Intermediate Piece, All 356's/912 (50-69)
Part Number: 369.01.111
Copper washer for the intermediate piece, but can be used in several parts of the car.
$4.00
Cover Plate Washer, All 356's/912 (50-69)
Part Number: 546.06.202
Cover plate washer for all 356 (1950-1966) (as needed) and 912 (1965-1969) models.
$5.13
Crank Pulley Bolt, All 356's/912 (50-69)
Part Number: 539.02.112
Crank pulley bolt for all 356 (1950-1965) and 912 (1965-1969) models.
$47.05
Crank Pulley Lock Washer, All 356's/912 (50-69)
Part Number: 539.02.111
Crank pulley washer for all 356 and 912 models (1950-1969).
$4.81
Crank Pulley, Sealing Washer, All 356's/912 (50-69)
Part Number: 616.102.163.01
Optional oil slinger ring, for early engines.
$10.45
Crankcase Gasket, 356/356A
Part Number: 539.01.124
Front gasket for 3-piece 1300, 1500, 1600 (up to engine #67000) and 1600 Super (up to engine # 81200) engine case.
$3.96
Crankshaft Drive Gear, All 356's/911/912/914 (50-77)
Part Number: 901.102.115.00
Brass distributor drive gear for all 356 (1950-1977), 911 (1965-1977), 912 (1965-1969), 914 (1970-1976) and 930 (1975-1977) models.
$69.95
Crankshaft Gear, All 356's/912 (50-69)
Part Number: 539.02.105
Steel crankshaft gear for 356, 356A, 356B, 356C and 912 models (1950-1969).
$382.00
Crankshaft Main Bearing Set, .25mm/.25mm, 356A/356B (55-63)
Part Number: 546.101.901.70
Steel main bearing set for the crankshaft for 356A and 356B (1955-1963) models. Inside .25mm, Outside .25mm.
$561.00
Crankshaft Main Bearing Set, .50mm/.25mm, All 356's/912 (50-69)
Part Number: 616.100.138.95.A
Main bearing set for crankshaft for 356, 356A,356B, 356C and 912 models (1950-1969). Fits 0.50mm case, 0.25mm crank.
$445.91
Crankshaft Main Bearing Set, .50mm/.25mm/+1mm Thrust, all 356's/912 (50-69)
Part Number: 616.100.138.95.AO1
Main bearing set for crankshaft for 356, 356A,356B, 356C and 912 models (1950-1969). Fits 0.50mm case, 0.25mm crank and +1mm thrust.
$448.95
Crankshaft Main Bearing Set, .50mm/.50mm, All 356's/912 (50-69)
Part Number: 616.100.138.100.A
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits .50mm case and .50mm crank.
$445.91
Crankshaft Main Bearing Set, .50mm/Thrust +1mm, All 356's/912 (50-69)
Part Number: 616.100.138.90.AO1
Main bearing set for crankshaft for 356, 356A, 356B, 356C and 912 models (1950-1969). Fits 0.50 mm case, standard crank and +1mm thrust.
$489.94
Crankshaft Seal Tool
Part Number: 10.0536.011
Crankshaft seal tool, crankshaft mount portion.
$409.20
Crankshaft Seal Tool, Complete
Part Number: 10.0536.012
Complete crankshaft seal tool.
$722.11
Crankshaft Seal Tool, Mount Portion
Part Number: 10.0536.013
Crankshaft seal tool - mount portion.
$359.89
Crankshaft Timing Gear (50-76)
Part Number: 111.105.223
Aftermarket crankshaft timing gear for 356 Pre-A, 356A, 356B, 356C, 911, 912, 914-4 and 912E models.
$97.50
Crankshaft Timing Gear Key (50-76)
Part Number: 111.105.213
Crankshaft timing gear key fits all 356, 912, 912E, 914, and 914-4 (1950-1976) models.
$5.53
Crankshaft, 4340 Chromoly Billet, All 356's/912 (50-69)
Part Number: SMC.102.015.02
Currently unavailable
$1,649.95
Crankshaft, 4340 Chromoly Forged, all 356's/912 (50-69)
Part Number: SMC.102.015.01
CURRENTLY UNAVAILABLE

$1,209.95
Distributor Drive Shaft, All 356's/912 (50-69)
Part Number: 539.09.101
Distributor drive shaft for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$201.00
Drive Line Fluid Filler, 8 Liter
Part Number: ATF.EURO.8
Drive Line Fluid Filler, 8 Liter.
$504.42
Engine Block Gasket Set, All 356's/912
Part Number: 616.101.901.01
Engine block gasket set for all 356 and 912 models (1950-1969).
$77.84
Engine Boot Set, 356/356A (50-59)
Part Number: 644.109.380.00
Engine boot set for 356 and 356A models (1950-1959).
$28.89
Engine Case Holder
Part Number: SMC.013.00
Engine case holder for all Porsche engines. Fits any standard roll away stand. It has three holes, but a fourth hole may be needed in order to fit a universal stand.
$103.24
Engine Case Stud, All 356's/912 (50-69)
Part Number: 539.01.118
Engine case stud for all 356 (1950-1965) and 912 (1965-1969) models. Sixteen needed.
$25.75
Engine Case Washer, All 356's/912 (65-69)
Part Number: 043.101.129
Engine case washer for all 356 and 912 models (1950-1969).
$1.01
Engine Cover Plate, Left, All 356's/912 (50-69)
Part Number: 539.06.638
Left side cover plate at the flywheel end of the engine for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$56.60
Engine Cover Plate, Left, All 356's/912 (50-69)
Part Number: 539.06.640
Left side cover plate at the pulley end of the engine for all 356 (1950-1965) and 912 (1965-1969) models.
$58.98
Engine Cover Plate, Right, All 356's/912 (50-69)
Part Number: 539.06.639
Right side cover plate at the pulley end of the engine for all 356 (1950-1965) and 912 (1965-1969) models.
$56.62
Engine Cover Plate, Right, All 356's/912 (50-69)
Part Number: 539.06.637
Right side cover plate at the flywheel end of the engine for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$58.98
Engine Cover Plate, US Heater, All 356's (50-65)
Part Number: 369.06.119
Cover plate at the flywheel end of engine for all 356 models with US version heater.
$278.29
Engine Ducting Screw & Washer Set, All 356's/912
Part Number: 644.369.002.00
Pan-head engine shroud screw with washer for 356, 356A, 356B, 356C and 912 (1950-1969) models.
$7.15
Engine Ducting Screw Set (Washers)
Part Number: 900.025.004.80
Price is for one. 25 washers required.
$0.19
Engine Ducting Seals, All 356's (50-65)
Part Number: 644.369.001.00
Engine ducting seals (USA version) for all 356 (1950-1965) models.
$27.95
Engine Oil Drain Plug, 356/912 (50-69)
Part Number: 539.01.133
Engine oil drain plug for all 356's (1950-1965) and 912 (1965-1969) models.
$23.35
Engine Push Rod Tube Seal, All 356's/912 (50-69)
Part Number: 539.05.207.S
Wrightwood Racing engine push rod tube seal for all 356 (1950-1965) and 912 (1965-1969) models. 16 needed per car.
$1.75
Engine Seal, Left/Right, All 356's
Part Number: 616.106.897.00
Greatly effects the fans ability to cool your engine!
$9.56
Engine Side Cover Plate, Left, All 356's
Part Number: 369.06.140
Left engine side cover plate for all 356 models.
$59.74
Engine Side Cover Plate, Right, All 356's (50-65)
Part Number: 369.06.141
Right engine side cover plate for all 356 (1950-1965) models.
$59.74
Engine Stand W/ Clamp, Blue, All 356's/911
Part Number: SMC.005.00
Forged steel engine stand with included clamp for 356 (1950-1965) and 911 (1965-1973) models.
$369.90
Engine Stand W/ Clamp, Orange, All 356's/911
Part Number: SMC.009.00
Forged steel engine stand with included clamp for 356 (1950-1965) and 911 (1965-1973) models.
$320.00
Engine Stand, 356/911/912/914/930 (50-89)
Part Number: SMC.002.00
Forged steel engine stand for 356 (1950-1965), 912 (1965-1969), 911/930 (1965-1989) and 914 (1970-1976) models.
$289.25
Engine Stud, All 356's (50-65)
Part Number: 539.01.114
Engine to transmission stud for all 356's (1950-1965). Two required.
$15.25
Engine Valve Guide, 1st O/S, .554'' OD
Part Number: 616.104.321.02
It fits 356, 356A, 356B, 356C and 912 models.
$9.14
Engine Valve Guide, 2nd O/S; .559'' OD
Part Number: 616.104.321.05
It fits 356, 356A, 356B, 356C and 912 models.
$24.34
Engine Valve Guide, Oversize (10mm x 14.07mm)
Part Number: SMC.104.322.60
Oversized engine valve guide for all 356 (1950-1965) and 912 (1965-1969) models. Measures 10mm x 14.07mm.
$48.46
Exhaust Valve (10mm x 30.5mm - 31mm)
Part Number: 616.105.405.50
Four required.
$189.89
Exhaust Valve Guide, All 356's 912
Part Number: 616.104.322.60
Exhaust valve guide. Four required for Super 90, 356C, 356SC, and 912 models. Eight required for 356A, Normal and Super models.
$8.95
Fan Housing Spacer, 356B/356C/912 (60-69)
Part Number: 616.106.125.00
The is the fiber gasket between the fan housing and the cover. It fits 356B, 356C and 912 models.
$4.20
Fan Loop Grommet, 356/356A (50-59)
Part Number: 644.025.611.00
Grommet for fan loops on 356 Pre-A and 356A models. Three required.
$2.46
Fan Shroud Rubber Plug, All 356's/912
Part Number: 539.06.116
Rubber plug for fan shroud on all 356 and 912 (1950-1969) models. Three required for 356 and 356A, two required for 356B, 356C and 912 models.
$4.05
Fan V Belt, 356 Pre-A (50-55)
Part Number: 547.09.305
Fan belt for 356 Pre-A (1950-1955) models. Measures 13mm x 850mm.
$11.10
Filter Gasket, All 356's/912 (50-69)
Part Number: 546.07.829
Filter gasket with filter cartridge. Fits all 356 and 912 (1950-1969) models.
$4.87
Flat Washer (8mm x 37mm)
Part Number: 900.025.007.03
Flat washer measuring 8mm x 37mm.
$1.40
Fluid Hand Pump, Sta-Lube Fluid Oil Pump
Part Number: SL4344
Fluid Hand Pump, Sta-Lube Fluid Oil Pump.
$10.22